Published Papers
     Search Papers (Springer,
   After 2008)
     Search Papers (Dbpia,
   Until 2007)
     Search Papers (JMST
   own data base)
       - Classification By Year   
       - Classification By Topic
     Special Issues
   
           
   
 
 
Subject Keyword Abstract Author
 
 
Tribological behavior of Fe-based bulk metallic glass¢Ó

Beom-Taek Jang/Seong-Hoon Yi/Seock-Sam Kim
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.89-92, 2010

Abstract : The unlubricated tribological characteristics of coating layers containing an Fe-based amorphous matrix have been investigated in air using an alumina ball with a diameter of 3.1 mm. From the ball-on-disk test system, the friction coefficient could be measured for up to 3,000 seconds. The temperature changes on the worn surfaces were also simultaneously measured using an infrared thermometer. Three different types of coating layers having an Fe-based amorphous matrix, an Fe-based amorphous matrix with embedded Ni-based selffluxing alloy particles, and an Fe-based amorphous matrix with embedded WC particles were prepared through a high velocity oxy-fuel (HVOF) process. Although the coating layers have certain levels of porosity, unique frictional characteristics attributed to the amorphous matrix were observed during the friction tests. Compared with conventional bearing steels such as AISI 521000 (Hv=840), excellent tribological and wear characteristics were obtained, demonstrating that an Fe-based bulk metallic glass powder is a viable engineering material for practical anti-wear coating applications.

Keyword : Bulk metallic glass; Friction coefficient; Tribological properties; Wear rates

 
 
 
JMST Editorial Office: #702 KSTC New Bldg, 22 7-gil, Teheran-ro, Gangnam-gu, Seoul 06130, Korea
TEL: +82-2-501-3605, E-mail: editorial@j-mst.org
JMST Production Office: #702 KSTC New Bldg, 22 7-gil, Teheran-ro, Gangnam-gu, Seoul 06130, Korea
TEL: +82-2-501-6056, FAX: +82-2-501-3649, E-mail: editorial@j-mst.org