Jianjun Chen/Young Wha Ma/Kee Bong Yoon
The Journal of Mechanical Science and Technology, vol. 24, no. 6, pp.1195-1201, 2010

Abstract : Compared with the conventional tensile creep test, it is much more difficult to obtain the creep properties of a material by the small punch creep test due to the complex deformation response and stress distribution in the miniature specimen of the material. Although creep behavior has been investigated by the small punch test, most studies have been limited to a specimen geometry and therefore, cannot be extended to other conditions conveniently. In this study, a new developed analysis routine is presented to derive the creep parameters of a material using data obtained from the small punch creep test. With the aid of the finite element method, the displacement and the displacement rate of the small punch are obtained for different load levels. The relationship between the stress and creep strain of the specimen and the applied load and the punch displacement is obtained by a dimensional analysis and the membrane stretching model. The creep properties obtained from small punch tests and the conventional creep tests are also compared. The values of the creep properties between the two types of tests agree well with each other within an acceptable accuracy range. This indicates that it is possible to obtain the creep parameters of a material from the small punch creep test instead of the conventional creep test by the analysis routines proposed in this study. Some suggestions for data reduction of the small punch creep tests are also presented to obtain more accurate material creep parameters.

Keyword : Small punch test; Creep; Finite element method; Dimensional analysis; Membrane stretching