| |
|
|
|
|
|
|
| |
|
| |
 |
|
| |
|
|
| |
|
The Journal of Mechanical Science and Technology, Volume 26, Number 5, 2012 |
|
|
Fractality in turbulence
S. M. Muztaba Salim and Franck Nicolleau
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1311-1314, 2012 |
|
|
Prediction of flow crossover in the GDL of PEFC using serpentine flow channel
Litan Kumar Saha and Nobuyuki Oshima
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1315-1320, 2012 |
|
|
Theoretical investigations on the effect of system parameters in series hydraulic hybrid system with hydrostatic regenerative braking
R. Ramakrishnan, Somashekhar S. Hiremath and M. Singaperumal
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1321-1331, 2012 |
|
|
A steady flow analsys on a cerebral aneurysm model with several stents for new stent design using PIV
Chang-Ho Yu, Kaoru Matsumoto, Shuya Shida, Dong Joon Kim and Makoto Ohta
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1333-1340, 2012 |
|
|
A numerical study on the entry problem of an elastic body using a level set method and a monolithic formulation
Hyoung Gwon Choi
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1341-1346, 2012 |
|
|
Numerical simulation of multiphase flows with material interface Numerical simulation of multiphase flows with material interface
Hyon Kook Myong
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1347-1354, 2012 |
|
|
Finite element simulation of blood flow in a flexible carotid artery bifurcation
Sang Hoon Lee, Hyoung Gwon Choi, Jung Yul Yoo
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1355-1361, 2012 |
|
|
Numerical assessment of turbulent models at a critical regime on unstructured meshes
Ju Yeol You and Oh Joon Kwon
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1363-1369, 2012 |
|
|
Numerical study on the range enhancement of a centrifugal compressor with a ring groove system
Chi-Yong Park, Young-Seok Choi, Kyoung-Yong Lee and Joon-Yong Yoon
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1371-1378, 2012 |
|
|
Numerical study on unsteadiness of tip clearance flow and performance prediction of axial compressor
Yoojun Hwang and Shin-Hyoung Kang
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1379-1389, 2012 |
|
|
On uncertainty and local sensitivity analysis for transient conjugate heat transfer problems
Christian Rauch
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1391-1402, 2012 |
|
|
Study on droplet formation with surface tension for electrohydrodynamic inkjet nozzle
Soo-Hong Lee, Xuan Hung Nguyen and Han Seo Ko
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1403-1408, 2012 |
|
|
Static/dynamic contact FEA and experimental study for tooth profile modification of helical gears
Yong-jun Wu, Jian-jun Wang and Qin-kai Han
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1409-1417, 2012 |
|
|
Prediction of vibration characteristics of a planar mechanism having imperfect joints using neural network
Selçuk Erkaya
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1419-1430, 2012 |
|
|
Fault diagnosis using binary tree and sphere-structured support vector machines
ShengFa Yuan and Ming Li
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1431-1438, 2012 |
|
|
Vibration of circular plate with multiple eccentric circular perforations by the Rayleigh-Ritz method
Khodabakhsh Saeedi, Alfin Leo, Rama B. Bhat and Ion Stiharu
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1439-1448, 2012 |
|
|
Experimental and numerical investigation of modal properties for liquid-containing structures
Hassan Jalali and Fardin Parvizi
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1449-1454, 2012 |
|
|
Nonlocal electro-thermal transverse vibration of embedded fluid-conveying DWBNNTs
A. Ghorbanpour Arani, M. Shokravi, S. Amir and M.R. Mozdianfard
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1455-1462, 2012 |
|
|
Characterizations of gun barrel vibrations of during firing based on shock response analysis and short-time Fourier transform
Hak In Gimm, Ki Up Cha and Chang Ki Cho
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1463-1470, 2012 |
|
|
Research on corrosion behavior of A6N01S-T5 aluminum alloy welded joint for high-speed trains
Guoqing Gou, Nan Huang, Hui Chen, Hongmei Liu, Aiqin Tian and Zhicheng Guo
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1471-1476, 2012 |
|
|
Analysis of glass fabric impregnation using a resin drop method
Seung-Wook Han, Nak-Sam Choi and Min-Soo Lee
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1477-1482, 2012 |
|
|
Effects of gradient on stress distribution in rotating functionally graded solid disks
Xu-Long Peng and Xian-Fang Li
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1483-1492, 2012 |
|
|
A study on increasing the performance of Savonius wind rotors
Burçin Deda Altan and Mehmet Atılgan
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1493-1499, 2012 |
|
|
Numerical investigation of effects of buoyancy around a heated circular cylinder in parallel and contra flow
Armando A. Soares, Nuno D. Couto, M. Duarte Naia, Norberto J. Gonçalves and Abel Rouboa
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1501-1513, 2012 |
|
|
Numerical study on the rotation of an elastic rod in a viscous fluid using an immersed boundary method
Ranjith Maniyeri and Sangmo Kang
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1515-1522, 2012 |
|
|
Hydrodynamic study involving a maxblend impeller with yield stress fluids
Houari Ameur, Mohamed Bouzit and Mustapha Helmaoui
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1523-1530, 2012 |
|
|
Effects of inlet radius and bell mouth radius on flow rate and sound quality of centrifugal blower
Pham Ngoc Son, Jae Won Kim, S. M. Byun and E. Y. Ahn
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1531-1538, 2012 |
|
|
Using characteristic strings to derive valid contracted graphs with hexagonal links plus other links for type synthesis of closed mechanisms
Yi Lu, Yang Lu, Nijia Ye, Bingyi Mao, Chunping Sui and Jianda Han
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1539-1546, 2012 |
|
|
A cyclic simulation approach for the generation of the non-stationary load histories of engineering vehicles
Jixin Wang, Jianhua Zhang, Yunlong Liang and Yonghai Yang
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1547-1554, 2012 |
|
|
Residual stress field of ballised holes
Man On Lai and Zhimin He
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1555-1565, 2012 |
|
|
Optimal design of spaced plates under hypervelocity impact
Younghoon Kim, Jeonghoon Yoo and Minhyung Lee
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1567-1575, 2012 |
|
|
Frequency shift of a nanomechanical sensor carrying a nanoparticle using nonlocal Timoshenko beam theory
Zhi-Bin Shen, Dao-Kui Li, Dong Li and Guo-Jin Tang
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1577-1583, 2012 |
|
|
An improved dynamic milling force coefficients identification method considering edge force
Guofeng Wang, Dongbiao Peng, Xuda Qin and Yinhu Cui
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1585-1590, 2012 |
|
|
Single discharge thermo-electrical modeling of micromachining mechanism in electric discharge machining
Yasin Sarikavak and Can Cogun
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1591-1597, 2012 |
|
|
Recurrent-neural-network-based identification of a cascade hydraulic actuator for closed-loop automotive power transmission control
Seung-Han You and Jin-Oh Hahn
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1599-1606, 2012 |
|
|
Covariance upperbound controllers for networked control systems
Sangho Ko
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1607-1614, 2012 |
|
|
Effect of variable viscosity on thermal boundary layer over a permeable flat plate with radiation and a convective surface boundary condition
Oluwole Daniel Makinde
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1615-1622, 2012 |
|
|
Multiple defect diagnostics of gas turbine engine using SVM and RCGA-based ANN algorithms
Youngho Kim, Junyoung Jang, Wanjo Kim, Tae-Seong Roh* and Dong-Whan Choi
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1623-1632, 2012 |
|
|
Effects of gas and particle emissions on wall radiative heat flux in oxy-fuel combustion
Sanghyun Park, Jungeun A. Kim, Changkook Ryu, Won Yang, Young Ju Kim and Sangil Seo
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1633-1641, 2012 |
|
|
Optimization of operating parameters and performance evaluation of forced draft cooling tower using response surface methodology (RSM) and artificial neural network (ANN)
Ramkumar Ramakrishnan and Ragupathy Arumugam
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1643-1650, 2012 |
|
|
|
|
 |
|
|
|
|
| |
| |
| |
|
|
| |
|
JMST Editorial Office: #702 KSTC New Bldg, 22 7-gil, Teheran-ro, Gangnam-gu, Seoul 06130, Korea
TEL: +82-2-501-3605, E-mail: editorial@j-mst.org |
JMST Production Office: #702 KSTC New Bldg, 22 7-gil, Teheran-ro, Gangnam-gu, Seoul 06130, Korea
TEL: +82-2-501-6056, FAX: +82-2-501-3649, E-mail: editorial@j-mst.org |
|
| |
|
|
