| |
|
|
|
|
|
|
| |
|
| |
 |
|
| |
|
|
| |
|
The Journal of Mechanical Science and Technology, Volume 26, Number 6, 2012 |
|
|
Transverse impact characteristics of a rubber pipe expansion joint
Yong Chen, Wang Yu, ZhiYi Zhang and Hongxing Hua
The Journal of Mechanical Science and Technology, vol. 26, no. 6, pp.1655-1661, 2012 |
|
|
An innovative experimental on-road testing method and its demonstration on a prototype vehicle
José C. Páscoa, Francisco P. Brójo, Fernando C. Santos and Paulo O. Fael
The Journal of Mechanical Science and Technology, vol. 26, no. 6, pp.1663-1670, 2012 |
|
|
Contact finite element method for dynamic meshing characteristics analysis of continuous engaged gear drives
Yong-jun Wu, Jian-jun Wang and Qin-kai Han
The Journal of Mechanical Science and Technology, vol. 26, no. 6, pp.1671-1685, 2012 |
|
|
A modified random decrement technique for modal identification from nonstationary ambient response data only
Chang-Sheng Lin, Dar-Yun Chiang
The Journal of Mechanical Science and Technology, vol. 26, no. 6, pp.1687-1696, 2012 |
|
|
On the chaotic dynamic response of deterministic nonlinear single and multi-degree-of-freedom systems
S. K. A. Shah, A. Soleiman Fallah and L. A Louca
The Journal of Mechanical Science and Technology, vol. 26, no. 6, pp.1697-1709, 2012 |
|
|
A semi-analytical technique for bending analysis of cylindrical panels with general loading and boundary conditions
Rahbar Ranji A, Rostami Hoseynabadi H
The Journal of Mechanical Science and Technology, vol. 26, no. 6, pp.1711-1718, 2012 |
|
|
Thermal fatigue of cast iron brake disk materials
Byeong-choon Goo, Choong-hwan Lim
The Journal of Mechanical Science and Technology, vol. 26, no. 6, pp.1719-1724, 2012 |
|
|
Adhesion strength in laminated glazings containing multilayer solar control coatings
"J. O. Aguilar, J. M. Rodríguez-Lelis, M. Carrasco de la Fuente, C. López-Mata,
The Journal of Mechanical Science and Technology, vol. 26, no. 6, pp.1725-1730, 2012 |
|
|
Empirical modeling of shot peening parameters for welded austenitic stainless steel using grey relational analysis
Lakhwinder Singh, R. A. Khan and M. L. Aggarwal
The Journal of Mechanical Science and Technology, vol. 26, no. 6, pp.1731-1739, 2012 |
|
|
Microstructure and wear characteristics on Al alloy matrix composite reinforced with Ni perform
Wonjo Park, Cheolhong Park, Hyungjin Kim and Sunchul Huh*
The Journal of Mechanical Science and Technology, vol. 26, no. 6, pp.1741-1746, 2012 |
|
|
Fatigue life analysis of shot-peened bearing steel
Sang-Jae Yoon, Jung-Hoon Park and Nak-Sam Choi*
The Journal of Mechanical Science and Technology, vol. 26, no. 6, pp.1747-1752, 2012 |
|
|
A relative assessment of sub grid scale models for large eddy simulation of co-axial combustor
Rupesh D. Shah, Hanumanthappa Patil and Jyotirmay Banerjee*
The Journal of Mechanical Science and Technology, vol. 26, no. 6, pp.1753-1763, 2012 |
|
|
Experimental and theoretical investigation on the sealing performance of the combined seals for reciprocating rod
Jianfeng Mao, Weizhe Wang* and Yingzheng Liu
The Journal of Mechanical Science and Technology, vol. 26, no. 6, pp.1765-1772, 2012 |
|
|
Suppression of flow-induced vibration of a circular cylinder by means of a flexible sheet
Sangil Kim and Seung-Chul Lee*
The Journal of Mechanical Science and Technology, vol. 26, no. 6, pp.1773-1779, 2012 |
|
|
Atomization characteristics of emulsified fuel oil by instant emulsification
Wonho Kim, Taeu Yu, and Woongsup Yoon*
The Journal of Mechanical Science and Technology, vol. 26, no. 6, pp.1781-1791, 2012 |
|
|
High-efficiency design of a tunnel ventilation jet fan through numerical optimization techniques
Joon-Hyung Kim, Jin-Hyuk Kim, Kwang-Yong Kim, Joon-Yong Yoon, Sang-Ho Yang and Young-Seok Choi*
The Journal of Mechanical Science and Technology, vol. 26, no. 6, pp.1793-1800, 2012 |
|
|
Optimization of the forging of aerofoil blade using the finite element method and fuzzy-Pareto based genetic algorithm
V. Alimirzaloo*, M. H. Sadeghi and F. R. Biglari
The Journal of Mechanical Science and Technology, vol. 26, no. 6, pp.1801-1810, 2012 |
|
|
Limit load analysis of shallow arches made of functionally bi-directional graded materials under mechanical loading
Ali Asghar Atai*, Mohammad Hassan Naei and Shabnam Rahrovan
The Journal of Mechanical Science and Technology, vol. 26, no. 6, pp.1811-1816, 2012 |
|
|
The effect of tube dimensions on optimized pressure and force loading paths in tube hydroforming process
S. M. H. Seyedkashi, H. Moslemi Naeini, G. H. Liaghat, M. Mosavi Mashadi, M. Mirzaali, K. Shojaee and Y. H. Moon*
The Journal of Mechanical Science and Technology, vol. 26, no. 6, pp.1817-1822, 2012 |
|
|
The influence of assembly clearance on the deformation and stress of an assembly structure through FEA simulation
Ahmad Zia* and Lihong Qiao
The Journal of Mechanical Science and Technology, vol. 26, no. 6, pp.1823-1827, 2012 |
|
|
Thermal stresses in an infinite circular cylinder
A. M. Abd-Alla, G. A.Yahya and A. M. Farhan
The Journal of Mechanical Science and Technology, vol. 26, no. 6, pp.1829-1839, 2012 |
|
|
Deformation characteristics of various grain boundary angles on AFM-based nanolithography using molecular dynamics
Chan Il Kim, Seung Han Yang and Young Suk Kim*
The Journal of Mechanical Science and Technology, vol. 26, no. 6, pp.1841-1847, 2012 |
|
|
Combining stress relaxation and rheometer test results in modeling a polyurethane stopper
Kyukwon Bang and H.-Y. Jeong*
The Journal of Mechanical Science and Technology, vol. 26, no. 6, pp.1849-1855, 2012 |
|
|
Finite element modeling of the human cervical spinal column: Role of the uncovertebral joint
In Seok Han, Young Eun Kim* and Sunghwan Jung
The Journal of Mechanical Science and Technology, vol. 26, no. 6, pp.1857-1864, 2012 |
|
|
Impact evaluation of rolling contact fatigue life models
Youngsik Choi* and Xiaoping Yang
The Journal of Mechanical Science and Technology, vol. 26, no. 6, pp.1865-1873, 2012 |
|
|
Multi-objective optimization of electric-discharge machining process using controlled elitist NSGA-II
Pushpendra S. Bharti*, S. Maheshwari and C. Sharma
The Journal of Mechanical Science and Technology, vol. 26, no. 6, pp.1875-1883, 2012 |
|
|
Adaptive control for small-hole EDM process with wavelet transform detecting method
Yi Jiang, Wansheng Zhao*, Xuecheng Xi and Lin Gu
The Journal of Mechanical Science and Technology, vol. 26, no. 6, pp.1885-1890, 2012 |
|
|
Analysis of dynamic stability in a turning process based on a 2-DOFs model with overlap factor
Laixi Zhang, Xingsong Wang* and Shulin Liu
The Journal of Mechanical Science and Technology, vol. 26, no. 6, pp.1891-1899, 2012 |
|
|
A novel six-degrees-of-freedom series-parallel manipulator
J. Gallardo-Alvarado*, R. Rodríguez-Castro, C. R. Aguilar-Nájera and L. Pérez-González
The Journal of Mechanical Science and Technology, vol. 26, no. 6, pp.1901-1909, 2012 |
|
|
On the fail-safe design of tendon-driven manipulators with redundant tendons
Jinn-Biau Sheu, Tyng Liu and Jyh-Jone Lee*
The Journal of Mechanical Science and Technology, vol. 26, no. 6, pp.1911-1920, 2012 |
|
|
Fundamental study of NOx removal from diesel exhaust gas by dielectric barrier discharge reactor
Tran Quang Vinh, Shuya Watanabe, Tomohiko Furuhata and Masataka Arai*
The Journal of Mechanical Science and Technology, vol. 26, no. 6, pp.1921-1928, 2012 |
|
|
A numerical analysis of the effects of a stratified pre-mixture on homogeneous charge compression ignition combustion
Narankhuu Jamsran and Ock Taeck Lim*
The Journal of Mechanical Science and Technology, vol. 26, no. 6, pp.1929-1935, 2012 |
|
|
Analytical solution of non-Fourier and Fourier bioheat transfer analysis during laser irradiation of skin tissue
H. Ahmadikia*, A. Moradi, R. Fazlali and A. Basiri Parsa
The Journal of Mechanical Science and Technology, vol. 26, no. 6, pp.1949-1955, 2012 |
|
|
Thermal behavior and entropy generation rate analysis of a viscous flow in MHD micropumps
Mehdi Kiyasatfar*, Nader Pourmahmoud, Mir Maqsood Golzan and Iraj Mirzaee
The Journal of Mechanical Science and Technology, vol. 26, no. 6, pp.1949-1955, 2012 |
|
|
Supercooling release of micro-size water droplets on microporous surfaces with cooling
ChunWan Park and Chaedong Kang*
The Journal of Mechanical Science and Technology, vol. 26, no. 6, pp.1957-1962, 2012 |
|
|
An experimental study on stability rating of impinging-jet injectors using air injection in a subscale chamber
Chul Jin Kim and Chae Hoon Sohn*
The Journal of Mechanical Science and Technology, vol. 26, no. 6, pp.1963-1970, 2012 |
|
|
Numerical analysis of the gas flow rate uniformity in the molten carbonate fuel cell (MCFC) under various conditions
Junhyun Cho, Han-Sang Kim, Kyoungdoug Min*, Jong Hoon Park, In Gab Chang and Tae Won Lee
The Journal of Mechanical Science and Technology, vol. 26, no. 6, pp.1971-1978, 2012 |
|
|
|
|
 |
|
|
|
|
| |
| |
| |
|
|
| |
|
JMST Editorial Office: #702 KSTC New Bldg, 22 7-gil, Teheran-ro, Gangnam-gu, Seoul 06130, Korea
TEL: +82-2-501-3605, E-mail: editorial@j-mst.org |
JMST Production Office: #702 KSTC New Bldg, 22 7-gil, Teheran-ro, Gangnam-gu, Seoul 06130, Korea
TEL: +82-2-501-6056, FAX: +82-2-501-3649, E-mail: editorial@j-mst.org |
|
| |
|
|
