Published Papers
     Search Papers (Springer,
   After 2008)
     Search Papers (Dbpia,
   Until 2007)
     Search Papers (JMST
   own data base)
       - Classification By Year   
       - Classification By Topic
     Special Issues
   
           
   
 
 
Subject Keyword Abstract Author
 
 
Categories
Production Engineering and Fusion Technology
Tribology issues in nanoimprint lithography
Kwang-Seop Kim/Jae-Hyun Kim/Hak-Joo Lee/Sang-Rok Lee
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.5-12, 2010
Next generation actuators leading breakthroughs
Toshiro Higuchi
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.13-18, 2010
Kinematics and optimization of a 2-DOF parallel manipulator with a passive constraining leg and linear actuators
Ji-Hoon Lee/Yun-Joo Nam/Myeong-Kwan Park
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.19-23, 2010
Development of nutation motors (improvement of pneumatic nutation motor by optimizing diaphragm design)
Shinji ODA/Koichi SUZUMORI/Kazuo UZUKA/Isao ENOMOTO
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.25-28, 2010
A study on the bending stress of the hollow sun gear in a planetary gear train
Kyung-Eun Ko/Do-Hyeong Lim,/Pan-Young Kim/Jinsoo Park
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.29-32, 2010
Simulation results of a hexahedron-octahedron based spherical stepping motor
Tomoaki Yano
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.33-36, 2010
An analysis of the main factors on the wear of brushes for automotive small brush-type DC motor
Wae-Gyeong Shin/Soo-Hong Lee
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.37-41, 2010
Development of a spherical motor driven by electro-magnets
Seiji Ikeshita/Akio Gofuku/Tetsushi Kamegawa/Takakazu Nagai
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.43-46, 2010
Continuous path control of a 5-DOF parallel-serial hybrid robot
Takuma Uchiyama/Hidetsugu Terada/Hironori Mitsuya
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.47-50, 2010
Development of an In-pipe micro mobile robot using peristalsis motion
Yuichi NAKAZATO/Yukihiro SONOBE/Shigeki TOYAMA
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.51-54, 2010
Gait generation and change of direction for the underactuated three-legged robot
Kazunori Kaede/Keiichi Watanuki
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.55-58, 2010
Nanotribological properties of silicon nano-pillars coated by a Z-DOL lubricating film
Duc Cuong Pham/Kyunghwan Na/Sungwook Yang/Jinseok Kim/Eui-Sung Yoon
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.59-65, 2010
Environmentally friendly tribology (Eco-tribology)
Shinya Sasaki
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.67-71, 2010
Estimations of work hardening exponents of engineering metals using residual indentation profiles of nano-indentation
Byung-Min Kim/Chan-Joo Lee/Jung-Min Lee
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.73-76, 2010
Study on tool wear mechanisms in milling laser sintered material
Abdullah Yassin/Takashi Ueda/Tatsuaki Furumoto/Mohd Sanusi Abdul Aziz/Ryutaro Tanaka/Akira Hosokawa
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.77-80, 2010
Investigation of temperature and thermal stress in ventilated disc brake
Pyung Hwang/Xuan Wu
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.81-84, 2010
Friction and wear properties of rice husk ceramics under dry condition†
Tuvshin Dugarjav/Takeshi Yamaguchi/Kei Shibata/Kazuo Hokkirigawa
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.85-88, 2010
Tribological behavior of Fe-based bulk metallic glass†
Beom-Taek Jang/Seong-Hoon Yi/Seock-Sam Kim
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.89-92, 2010
Effect of a dynamic absorber on friction-induced vibration of a rectangular plate
Hiroki Mori/Oleksandr Mikhyeyev/Takuo Nagamine/Mizue Mori/Yuichi Sato
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.93-96, 2010
Assessment of adhesion between thin film and silicon based on a scratch test
Jung-Eun Lee/Hyun-Joon Kim/Dae-Eun Kim
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.97-101, 2010
Surface durability of WC/C-coated case-hardened steel gear
Masahiro Fujii/Masanori Seki/Akira Yoshida
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.103-106, 2010
Nanomechanical characteristics at an ultra-small particle-surface contact interface
In-Ha Sung/Hung-Gu Han/Hosung Kong
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.107-110, 2010
High-pressure behavior and tribological properties of wind turbine gear oil
Sobahan Mia*, Shota Mizukami, Ryusei Fukuda, Shigeki Morita and Nobuyoshi Ohno
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.111-114, 2010
Sensitivity study of frictional behavior by dimensional analysis in cold forging
Joseph S. Ajiboye/Ki-Ho Jung/Yong-Taek Im
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.115-118, 2010
Effect of micro-scale Young’s modulus and surface roughness on adhesion property to plasma-treated rubber surface
Jong-Hyoung Kim/Noritsugu Umehara/Hiroyuki Kousaka/Mamoru Shimada/Mitsuru Hasegawa
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.119-122, 2010
Parametric study on mechanical clinching process for joining aluminum alloy and high-strength steel sheets
Chan-Joo Lee/Jae-Young Kim/Sang-Kon Lee/Dae-Cheol Ko/Byung-Min Kim
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.123-126, 2010
Study on laser assisted milling of ferrous based consolidated material
Tatsuaki Furumoto/Takashi Ueda/Teruyuki Osaka/Abdullah Yassin/Akira Hosokawa/Ryutaro Tanaka
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.127-130, 2010
Deformation behavior of commercial Mg-Al-Zn-Mn type alloys under a hydrostatic extrusion process at elevated temperatures
Duk-Jae Yoon, Sangmok Lee*, Seong-Joo Lim and Eung-Zu Kim
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.131-135, 2010
Application of flexible forming process to hull structure forming
Seong-Chan Heo/Young-Ho Seo/Jung-Won Park/Tae-Wan Ku/Jeong Kim/Beom-Soo Kang
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.137-140, 2010
Surface durability of powder-forged roller treated by shot peening
Masanori Seki/Masahiro Fujii/Yuji Kobayashi/Masaaki Sato/Akira Yoshida
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.141-144, 2010
Optimal injection molding conditions considering the core shift for a plastic battery case with thin and deep walls
Dong-Gyu Ahn/Dae-Won Kim/Yeol-Ui Yoon
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.145-148, 2010
Eliminating weldlines of an injection-molded part with the aid of high-frequency induction heating
Keun Park/Dong-Hwi Sohn/Kwang-Hwan Cho
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.149-152, 2010
Airbag tool polishing for aspherical glass lens molds
Hocheol Lee/Junguk Kim/Hyunhyung Kang
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.153-158, 2010
A practical approach for simulation and manufacturing of a ball-end mill using a 5-axis CNC grinding machine
Trung Thanh Pham/Sung Lim Ko
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.159-163, 2010
Indirect cutting force measurement in the micro end-milling process based on frequency analysis of sensor signals
Bong-Cheol Shin/Seok-Jae Ha/Myeong-Woo Cho/Tae-Il Seo/Gil-Sang Yoon/Young-Moo Heo
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.165-168, 2010
Product development with TRIZ: design evolution of deburring tools for intersecting holes
Chang-Hee Cho/Kwon-Hee Kim
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.169-173, 2010
A design of speed reducer with trapezoidal tooth profile for robot manipulator
Won-Ki Nam, Se-Hoon Oh*
The Journal of Mechanical Science and Technology, vol. 25, no. 1, pp.171-176, 2011
Influence of discharge energy on machining characteristics in EDM
Marin Gostimirovic*, Pavel Kovac, Milenko Sekulic and Branko Skoric
The Journal of Mechanical Science and Technology, vol. 26, no. 1, pp.173-179, 2012
A new optical measurement system for determining the geometrical errors of rotary axis of a 5-axis miniaturized machine tool
Sung-Ryung PARK/Trung-Kien HOANG/Seung-Han YANG
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.175-179, 2010
Improving profile accuracy in SPIF process through statistical optimization of forming parameters
Ghulam Hussain*, Gao Lin, Nasir Hayat
The Journal of Mechanical Science and Technology, vol. 25, no. 1, pp.177-182, 2011
Fabrication and characterization of PMN-PT single crystal cantilever array for cochlear-like acoustic sensor
S. Hur/S.Q. Lee/H.S. Choi
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.181-184, 2010
Correlated macrostructural parameters of weld and weld current in the SMAW of small pipes
M. E. Aalami-Aleagha* and A. M. Rashidi
The Journal of Mechanical Science and Technology, vol. 26, no. 1, pp.181-185, 2012
Prediction of the resistance coefficient in a segment ball valve
Jin-Hwan Lee/Kwon-Hee Lee
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.185-188, 2010
The Development of gearless reducers with rolling balls
Hidetsugu Terada
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.189-195, 2010
Active inspection supporting system based on mixed reality after design and manufacture in an offshore structure
Jung-Min Lee/Kyung-Ho Lee/Dea-Seok Kim/Chung-Hyun Kim
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.197-202, 2010
Simultaneous temperature measurements of bearing and seal parts of a swash plate type axial piston pump - effects of piston clearance and fluid property
Toshiharu Kazama/Hayato Sasaki/Yukihito Narita
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.203-206, 2010
A novel design of active accelerator pedal using linear electromagnetic actuator
Jae-Yong Lee/Jin-Ho Kim/Sang-Min Woo/Jeh-Won Lee
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.207-210, 2010
Fast drive of displacement magnification mechanism with flexure hinge using loading type impact damper
Nobuhiko Henmi/Yuta Sumi/Michihiko Tanaka
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.211-214, 2010
Robust design of railway vehicle suspension using a process capability index
Kwang-Ki Lee/Chan-Kyoung Park/Seung-Ho Han
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.215-218, 2010
Fabrication and evaluation of various types of micro one-way valves through micro rubber molding process
Yuki UOHASHI/Koichi SUZUMORI/Hironari TANIGUCHI
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.219-222, 2010
Vibration transmissibility reduction module with flexure mechanism for personal tools
Donghyun Hwang/Deuk-Kyu Lee/Jaehwa Jeong/Moon G. Lee
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.223-226, 2010
Behavior of piston rings passing over cylinder ports in two-stroke cycle engines
Kohei Nakashima/Yuki Nakano/Soichi Ishihara/Yoshio Murakami/Masago Yamamoto
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.227-230, 2010
Design of magnetically levitated rotors in a large flywheel energy storage system from a stability standpoint
Seong-yeol Yoo/Wook-ryun Lee/Yong-chae Bae/Myounggyu Noh
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.231-235, 2010
Augmented reality-based training system for metal casting
Keiichi Watanuki/Lei Hou
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.237-240, 2010
An approach for product life functionality under component deterioration process
Angus Jeang
The Journal of Mechanical Science and Technology, vol. 23, no. 1, pp.237-245, 2009
Selective laser sintering of PCL/TCP composites for tissue engineering scaffolds
Haseung Chung/Haeseong Jee/Suman Das
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.241-244, 2010
Development of a walking assist machine using crutches (Composition and basic experiments)
Masaru HIGUCHI/Makoto OGATA/Shuta SATO/Yukio TAKEDA
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.245-248, 2010
Research on method of constraint conversion in feature-based data exchange between heterogeneous CAD systems
Tie-qiang MA
The Journal of Mechanical Science and Technology, vol. 23, no. 1, pp.246-253, 2009
Computational fluid analysis of abrasive waterjet cutting head
Md. G. Mostofa/Kwak Yong Kil/Ahn Jung Hwan
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.249-252, 2010
Synchronized presentation of odor with airflow using olfactory display
Haruka Matsukura/Hitoshi Yoshida/Takamichi Nakamoto/Hiroshi Ishida
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.253-256, 2010
Development of virtual reality-based universal design review system
Keiichi Watanuki
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.257-262, 2010
Simultaneous control of the motion and stiffness of redundant closed-loop link mechanisms with elastic elements
Nobuyuki Iwatsuki/Takanori Kotte/Koichi Morikawa
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.258-288, 2010
The effects of glass fiber reinforcement on the mechanical behavior of polyurethane foam
Dae-Suk Han/In-Beom Park/Myung-Hyun Kim/Byeong-Jae Noh/Wha-Soo Kim/Jae-Myung Lee
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.263-266, 2010
Study on recycling of waste water from spent water-soluble coolant
Kazuya Takada/Yasuo Kondo/Kenji Yamaguchi/Satoshi Sakamoto
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.267-270, 2010
Analysis of eccentricity in the ball bar measurement
Dong-Mok LEE/Young-Taek CHA/Seung-Han YANG
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.271-274, 2010
Selection of an optimized method for pitting processes with sustainability as an important factor
Ryuichi Saitoh/Hiroki Yamakiri/Tsuneo Kurita/Shinsuke Kondoh/Nozomu Mishima/Shinya Sasaki
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.275-278, 2010
Reliability-based design optimization using convex approximations and sequential optimization and reliability assessment method
Tae Min Cho/Byung Chai Lee
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.279-283, 2010
Development of a distributed geometric modeling system based on peer to peer
Sung-il Choi/Sangho Park/Murali Subramaniyam
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.289-292, 2010
Analysis on the ink transfer mechanism in R2R application
Sangwon Lee/Yang Na
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.293-296, 2010
Computer aided simulation of mesoscale particles mixing for direct printable ink
Dong Hoon Oh/Nam Soo Kim
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.297-300, 2010
An application of ESD technology for the R2R printing process
Jung Su Kim/Kyung Hyun Choi/Kang Dae Kim/Chung Hwan Kim/Sung Woo Bae/Dong Soo Kim
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.301-305, 2010
Simulation of droplet generation through electrostatic forces
Khalid Rahman/Jeong-Beom Ko/Saleem Khan/Dong-Soo Kim/Kyung-Hyun Choi
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.307-310, 2010
Characterization for coating processes of imidazole powders using an ultrasonic atomizer
Jun-Sik Lee/Jun-Ki Kim/Mok-Soon Kim/Jong-Hyun Lee
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.311-314, 2010
Quality control with matching technology in roll to roll printed electronics
Changwoo Lee/Hyunkyoo Kang/Hojoon Kim/Ho Anh Duc Nguyen/Keehyun Shin
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.315-318, 2010
Steering guide-based lateral control for roll-to-roll printed electronics
Hyeunhun Shin/Thanhtam Ho/Sangyoon Lee
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.319-322, 2010
Optimum suspension unit design for enhancing the mobility of wheeled armored vehicles
Eun-Ho Choi/Jae-Bong Ryoo/Jin-Rae Cho/O-Kaung Lim
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.323-330, 2010
Differential quadrature application in post-buckling analysis of a hinged-fixed elastica under terminal forces and self-weight
O. Sepahi/M.R. Forouzan/P. Malekzadeh
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.331-336, 2010
Dynamic problem of generalized thermoelastic diffusive medium
Rajneesh Kumar/Tarun Kansal
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.337-342, 2010
Novel design of a small field robot with multi-active crawlers capable of autonomous stair climbing
Byeong-Sang Kim/Quy-Hung Vu/Jae-Bok Song/Chung-Hyuk Yim
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.343-350, 2010
Development of analytical process to reduce side load in strut-type suspension
Y. I. Ryu/D. O. Kang/S. J. Heo/H. J. Yim/J. I. Jeon
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.351-356, 2010
A semi-analytical solution for forced vibrations response of rectangular orthotropic plates with various boundary conditions
Rahbar Ranji A./Rostami Hoseynabadi H.
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.357-364, 2010
Sonar-based obstacle avoidance using region partition scheme
T. T. Quyen Bui/Keum-Shik Hong
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.365-372, 2010
Stiffness modeling of a family of 6-DoF parallel mechanisms with three limbs based on screw theory
Bing Li/Hongjian Yu/Zongquan Deng/Xiaojun Yang/Hong Hu
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.373-382, 2010
Mathematical models for manufacturing a novel gear shaper cutter
Shen-Wang Lin/Cheng-Shun Han/Jiu-Bin Tan/Shen Dong
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.383-390, 2010
Cross direction register modeling and control in a multi-layer gravure printing
Hyun-Kyoo Kang, Chang-Woo Lee, Jae-Min Lee, Kee-Hyun Shin
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.391-397, 2010
Disc cutters’ layout design of the full-face rock tunnel boring machine (TBM) using a cooperative coevolutionary algorithm
Wei Sun , Junzhou Huo*, Haifeng Zhao, Yu Zhao
The Journal of Mechanical Science and Technology, vol. 25, no. 2, pp.415-427, 2011
Formability evaluation of dimple forming process based on numerical and experimental approach
Seong-Chan Heo, Young-Ho Seo, Tae-Wan Ku, Beom-Soo Kang*
The Journal of Mechanical Science and Technology, vol. 25, no. 2, pp.429-439, 2011
Fretting damage prediction of connecting rod of marine diesel engine
Jung Ho Son*, Sung Chan Ahn, Jong Gug Bae, Man Yeong Ha
The Journal of Mechanical Science and Technology, vol. 25, no. 2, pp.441-447, 2011
Efficiency evaluation of micro factory for micro pump manufacture
Murali Subramaniyam
The Journal of Mechanical Science and Technology, vol. 23, no. 2, pp.498-503, 2009
Three-dimensional model for electromigration induced evolution of flip chip solder joints
Dongchoul Kim
The Journal of Mechanical Science and Technology, vol. 23, no. 2, pp.504-511, 2009
Kinematical analysis on the several linkage drives for mechanical presses
Kyung Chun Ham
The Journal of Mechanical Science and Technology, vol. 23, no. 2, pp.512-524, 2009
Analysis of unavoidable geometric errors in the side wall of end-milled parts for corner surface
Kun Sang Lee
The Journal of Mechanical Science and Technology, vol. 23, no. 2, pp.525-535, 2009
Performance and emission studies on an agriculture engine on neat Jatropha oil
Bhupendra Singh Chauhan/Naveen Kumar/Haeng Muk Cho
The Journal of Mechanical Science and Technology, vol. 24, no. 2, pp.529-535, 2010
The effect of channel flow pattern on internal properties distribution of a proton exchange membrane fuel cell for cathode starvation conditions
Dong-Soo Ko/Young-Min Kang/Jang-Sik Yang/Ji-Hwan Jeong/Gyung-Min Choi/Duck-Jool Kim
The Journal of Mechanical Science and Technology, vol. 24, no. 2, pp.537-543, 2010
Thermal performance of horizontal closed-loop oscillating heat-pipe with check valves
S. Rittidech/N. Pipatpaiboon/S. Thongdaeng
The Journal of Mechanical Science and Technology, vol. 24, no. 2, pp.545-550, 2010
Spray characteristics of the rotating fuel injection system Spray characteristics of the rotating fuel injection system of a micro-jet engine
Seong Man Choi/Seong Ho Jang/Dong Hun Lee/Gyong Won You
The Journal of Mechanical Science and Technology, vol. 24, no. 2, pp.551-558, 2010
Spray formation by a swirl spray jet in low speed cross-flow
Sangseung Lee/Wonho Kim/Woongsup Yoon
The Journal of Mechanical Science and Technology, vol. 24, no. 2, pp.559-568, 2010
Laser straight cutting of zirconia tiles
B. S. Yilbas*, S. S. Akhtar and C. Karatas
The Journal of Mechanical Science and Technology, vol. 26, no. 2, pp.591-599, 2012
Fault diagnosis of rotary kiln using SVM and binary ACO
Ouahab Kadri*, Leila Hayet Mouss and Mohamed Djamel Mouss
The Journal of Mechanical Science and Technology, vol. 26, no. 2, pp.601-608, 2012
Monitoring of hard turning using acoustic emission signal
J. Bhaskaran*, M. Murugan, N. Balashanmugam and M. Chellamalai
The Journal of Mechanical Science and Technology, vol. 26, no. 2, pp.609-615, 2012
Experimental study of miniaturized tip test
Y. T. Im
The Journal of Mechanical Science and Technology, vol. 22, no. 5, pp.924-930, 2008
Processing map for the hot working of Ti-8Ta-3Nb
Kyung Won Lee
The Journal of Mechanical Science and Technology, vol. 22, no. 5, pp.931-936, 2008
Experimental study for roll gap adjustment due to roll wear in single-singlestand
Y. Lee
The Journal of Mechanical Science and Technology, vol. 22, no. 5, pp.937-945, 2008
Transient elastohydrodynamic lubrication film thickness in sliding and rolling line contacts
Siyoul Jang
The Journal of Mechanical Science and Technology, vol. 22, no. 5, pp.946-956, 2008
Reliability prediction system based on the failure rate model for electronic components
Seung Woo Lee
The Journal of Mechanical Science and Technology, vol. 22, no. 5, pp.957-964, 2008
An evaluation of the machinability of nitinol shape memory alloy by electrochemical polishing
Eun Sang Lee*, Tae Hee Shin
The Journal of Mechanical Science and Technology, vol. 25, no. 4, pp.963-969, 2011
A method to analyze the difference of 3-D CAD model files based on feature extraction
Zou Linghao*, Guo Dongming, Gao Hang
The Journal of Mechanical Science and Technology, vol. 25, no. 4, pp.971-976, 2011
Design of A Nano-Printer Based on AFPN (Active Fountain Pen Nano-Lithography) using Switch Control
Kyoil Hwang, ChunYup Shin, Rui Mingwu, Suk-Han Lee. Hun-mo Kim*
The Journal of Mechanical Science and Technology, vol. 25, no. 4, pp.977-985, 2011
Optimization for an active fountain pen nanolithography device fabrication
Rui Ming Wu, Lee Suk Han, Kim Hun Mo*
The Journal of Mechanical Science and Technology, vol. 25, no. 4, pp.987-993, 2011
Characteristics of laser assisted machining for silicon nitride ceramic according to machining parameters
Jong-Do Kim*, Su-Jin Lee, Jeong Suh
The Journal of Mechanical Science and Technology, vol. 25, no. 4, pp.995-1001, 2011
Determination of optimum operation cases in electric arc welding machine using neural network
Tahir Çetin Akinci*, Hidir Selçuk Noğay, Gökhan Gökmen
The Journal of Mechanical Science and Technology, vol. 25, no. 4, pp.1003-1010, 2011
Process capability study of polyjet printing for plastic components
Rupinder Singh*
The Journal of Mechanical Science and Technology, vol. 25, no. 4, pp.1011-1015, 2011
Advanced temperature control of high carbon steel for hot strip mills
Cheol Jae Park, Kang Sup Yoon, Chang Hoon Lee
The Journal of Mechanical Science and Technology, vol. 24, no. 5, pp.1011-1017, 2010
Sensitivity analysis of plating conditions on mechanical properties of thin film for MEMS applications
Yoonhwan Woo, Sang-Hyun Kim*
The Journal of Mechanical Science and Technology, vol. 25, no. 4, pp.1017-1022, 2011
Optimum tool path generation for 2.5D direction-parallel milling with incomplete mesh model
Hyun-Chul Kim
The Journal of Mechanical Science and Technology, vol. 24, no. 5, pp.1019-1027, 2010
Application of magnetic abrasive polishing to composite materials
Tae-Wan Kim, Dae-Min Kang, Jae-Seob Kwak
The Journal of Mechanical Science and Technology, vol. 24, no. 5, pp.1029-1034, 2010
Development of a novel variable rake angle mechanism for noncircular turning and its control
Byung-Sub Kim, Tsu-Chin Tsao
The Journal of Mechanical Science and Technology, vol. 24, no. 5, pp.1035-1040, 2010
Flank wear regulation using artificial neural networks
Danko Brezak, Dubravko Majetic, Toma Udiljak, Josip Kasac
The Journal of Mechanical Science and Technology, vol. 24, no. 5, pp.1041-1052, 2010
Study of cutting speed on surface roughness and chip formation when machining nickel-based alloy
Basim A. Khidhir, Bashir Mohamed
The Journal of Mechanical Science and Technology, vol. 24, no. 5, pp.1053-1059, 2010
Enhancement of the punch pin durability induced by the PVD coating in production process of the automotive inner pipe
Chang-Min Suh, Sang-Yeob Oh, Young-Sik Pyun
The Journal of Mechanical Science and Technology, vol. 24, no. 5, pp.1061-1066, 2010
Comparison of thermal fatigue behaviour of ASTM A 213 grade T-92 base and weld tubes
G. R. Jinu, P. Sathiya, G. Ravichandran, A. Rathinam
The Journal of Mechanical Science and Technology, vol. 24, no. 5, pp.1067-1076, 2010
Porosity in fiber laser formation of 5A06 aluminum alloy
Yangchun Yu, Chunming Wang, Xiyuan Hu, Jun Wang, Shengfu Yu
The Journal of Mechanical Science and Technology, vol. 24, no. 5, pp.1077-1082, 2010
Optimization of EDM process for multiple performance characteristics using Taguchi method and Grey relational analysis
Jong Hyuk Jung, Won Tae Kwon
The Journal of Mechanical Science and Technology, vol. 24, no. 5, pp.1083-1090, 2010
Three-dimensional model of spray forming by fringe element reconstruction method
Du-Soon Choi
The Journal of Mechanical Science and Technology, vol. 24, no. 5, pp.1091-1096, 2010
Novel scan path generation method based on area division for SFFS
Kyung-Hyun Choi
The Journal of Mechanical Science and Technology, vol. 23, no. 4, pp.1101-1111, 2009
An investigation in crashworthiness evaluation of aircraft seat cushions at extreme ranges of temperature
Hamid Khademhosseini Beheshti, Hamid Lankarani
The Journal of Mechanical Science and Technology, vol. 24, no. 5, pp.1105-1110, 2010
Measurement of solid propellant burning rates by analysis of ultrasonic full waveforms
Sung-Jin Song
The Journal of Mechanical Science and Technology, vol. 23, no. 4, pp.1112-1117, 2009
Analysis of weld-induced residual stresses and distortions in thin-walled cylinders
Naeem Ullah Dar
The Journal of Mechanical Science and Technology, vol. 23, no. 4, pp.1118-1131, 2009
Dynamic analysis of fiber-reinforced elastomeric isolation structures
Gyung Ju Kang
The Journal of Mechanical Science and Technology, vol. 23, no. 4, pp.1132-1141, 2009
Prediction of warpage in plastic injection molding based on design of experiments
Wei Guo*, Lin Hua, Huajie Mao and Zhenghua Meng
The Journal of Mechanical Science and Technology, vol. 26, no. 4, pp.1133-1139, 2012
Optimization of squeeze casting parameters for non symmetrical AC2A aluminium alloy castings through Taguchi method
P. Senthil* and K. S. Amirthagadeswaran
The Journal of Mechanical Science and Technology, vol. 26, no. 4, pp.1141-1147, 2012
Development of a Web-based RCM system for the driverless Rubber-Tired K-AGT system
Chulho Bae
The Journal of Mechanical Science and Technology, vol. 23, no. 4, pp.1142-1156, 2009
Design of pollution preventing system for camera window
Dong-Hoon Kim
The Journal of Mechanical Science and Technology, vol. 22, no. 6, pp.1149-1153, 2008
A study on reliability centered maintenance planning of a standard electric motor unit subsystem using computational techniques
Chulho Bae
The Journal of Mechanical Science and Technology, vol. 23, no. 4, pp.1157-1168, 2009
Iron oxide coating films in soda-lime glass by triboadhesion
J. O. Aguilar
The Journal of Mechanical Science and Technology, vol. 23, no. 4, pp.1169-1174, 2009
Comparison study on the accuracy of metamodeling technique for non-convex functions
Byeong-Soo Kim
The Journal of Mechanical Science and Technology, vol. 23, no. 4, pp.1175-1181, 2009
Design of new sound metric and its application for quantification of an axle gear whine sound by utilizing artificial neural network
Hyun-Hoo Lee
The Journal of Mechanical Science and Technology, vol. 23, no. 4, pp.1182-1193, 2009
Evaluation of Y2O3 surface machinability using ultra-precision lapping process with IED
Ji Wan Cha
The Journal of Mechanical Science and Technology, vol. 23, no. 4, pp.1194-1201, 2009
Rule-based cutting condition recommendation system for intelligent machine tools
Seung Woo Lee
The Journal of Mechanical Science and Technology, vol. 23, no. 4, pp.1202-1210, 2009
Prediction of deformations of steel plate by artificial neural network in forming process with induction heating
Truong-Thinh Nguyen
The Journal of Mechanical Science and Technology, vol. 23, no. 4, pp.1211-1221, 2009
Analysis of plastic penetration in process of groove ball-section ring rolling
L. Hua
The Journal of Mechanical Science and Technology, vol. 22, no. 7, pp.1374-1382, 2008
Environmentally conscious hard turning of cemented carbide materials on the basis of micro-cutting in SEM: stressing four kinds of cemented carbides with PCD tools
Sung Jung Heo
The Journal of Mechanical Science and Technology, vol. 22, no. 7, pp.1383-1390, 2008
Evaluation of friction coefficient using indentation model of Brinell hardness test for sheet metal forming
Daw-Kwei Leu*
The Journal of Mechanical Science and Technology, vol. 25, no. 6, pp.1509-1517, 2011
A Method for Planar Development of 3D surfaces in Shoe Pattern Design
Sung-Hwan Kim
The Journal of Mechanical Science and Technology, vol. 22, no. 8, pp.1510-1519, 2008
Multi-objective optimization of process parameters for the helical gear precision forging by using Taguchi method
Wei Feng and Lin Hua*
The Journal of Mechanical Science and Technology, vol. 25, no. 6, pp.1519-1527, 2011
A Control System for Uniform Bead in Fillet Arc Welding on Tack Welds
Jae-Woong Kim
The Journal of Mechanical Science and Technology, vol. 22, no. 8, pp.1520-1526, 2008
Additive properties of saturated very long chain fatty acids in Castor and Jojoba oils
Hosung Kong
The Journal of Mechanical Science and Technology, vol. 22, no. 8, pp.1527-1536, 2008
Interaction between laser-induced plasma/vapor and arc plasma during fiber laser-MIG hybrid welding
Jun Wang, Chunming Wang*, Xuanxuan Meng, Xiyuan Hu, Yangchun Yu and Shengfu Yu
The Journal of Mechanical Science and Technology, vol. 25, no. 6, pp.1529-1533, 2011
Experimental research on machining characteristics of SiC ceramic with end electric discharge milling
Renjie Ji, Yonghong Liu*, Yanzhen Zhang, Xin Dong, Zhili Chen and Baoping Cai
The Journal of Mechanical Science and Technology, vol. 25, no. 6, pp.1535-1542, 2011
Optimum design of roll forming process of slide rail using design of experiments
Naksoo Kim
The Journal of Mechanical Science and Technology, vol. 22, no. 8, pp.1537-1543, 2008
Evaluation of weldability for resistance spot welded single-lap joint between GA780DP and hot-stamped 22MnB5 steel sheets
Hong-Seok Choi1, Geun-Hwan Park1, Woo-Seung Lim1 and Byung-min Kim2,*
The Journal of Mechanical Science and Technology, vol. 25, no. 6, pp.1543-1550, 2011
Single-point diamond turning of electroless nickel for flat X-ray mirror
Kwon Su Chon
The Journal of Mechanical Science and Technology, vol. 24, no. 8, pp.1603-1609, 2010
Stress profiles at contact surface in ring compression test
Beong Bok Hwang
The Journal of Mechanical Science and Technology, vol. 24, no. 8, pp.1611-1616, 2010
A new parameter and its effect on the formability in single point incremental forming: A fundamental investigation
Ghulam Hussain
The Journal of Mechanical Science and Technology, vol. 24, no. 8, pp.1617-1621, 2010
Tooling device design for vibration-assisted high speed shaping of PMMA
D. B. Kang
The Journal of Mechanical Science and Technology, vol. 24, no. 8, pp.1623-1629, 2010
Comparison of tribological characteristics between aluminum alloys and polytetrafluoroethylene composites journal bearings under mineral oil lubrication
Soo Hyung Kim
The Journal of Mechanical Science and Technology, vol. 24, no. 8, pp.1631-1635, 2010
Determination of the minute range for RSM to select the optimum cutting conditions during turning on CNC lathe
Won Tae Kwon
The Journal of Mechanical Science and Technology, vol. 24, no. 8, pp.1637-1645, 2010
Study on the manufacturing process of precision linear guide rail through shape rolling and shape drawing
Byung-Min Kim
The Journal of Mechanical Science and Technology, vol. 24, no. 8, pp.1647-1653, 2010
An ultra-high pressure sensor based on SOI piezoresistive material
Yulong Zhao
The Journal of Mechanical Science and Technology, vol. 24, no. 8, pp.1655-1660, 2010
Spectroscopic techniques as a diagnostic tool for early detection of osteoporosis
Donggeun Lee, Kyung Chun Kim
The Journal of Mechanical Science and Technology, vol. 24, no. 8, pp.1661-1668, 2010
Surface roughness and cutting force prediction in MQL and wet turning process of AISI 1045 using design of experiments
Choon Man Lee
The Journal of Mechanical Science and Technology, vol. 24, no. 8, pp.1669-1677, 2010
Effect of rolling ratio on groove-section profile ring rolling
Yu-Min Zhao
The Journal of Mechanical Science and Technology, vol. 24, no. 8, pp.1679-1687, 2010
Effect of moulding sand on statistically controlled hybrid rapid casting solution for zinc alloys
Rupinder Singh
The Journal of Mechanical Science and Technology, vol. 24, no. 8, pp.1689-1695, 2010
Evaluation of friction coefficient using simplified deformation model of plastic hemispherical contact with a rigid flat
Daw-Kwei Leu
The Journal of Mechanical Science and Technology, vol. 24, no. 8, pp.1697-1707, 2010
Fabrication of suspended micro-structures using diffsuser lithography on negative photoresist
Gyu Man Kim
The Journal of Mechanical Science and Technology, vol. 22, no. 9, pp.1765-1771, 2008
Gear hot forging process robust design based on finite element method
Jung DongWon
The Journal of Mechanical Science and Technology, vol. 22, no. 9, pp.1772-1778, 2008
Multi-objective optimization of electric-discharge machining process using controlled elitist NSGA-II
Pushpendra S. Bharti*, S. Maheshwari and C. Sharma
The Journal of Mechanical Science and Technology, vol. 26, no. 6, pp.1875-1883, 2012
Adaptive control for small-hole EDM process with wavelet transform detecting method
Yi Jiang, Wansheng Zhao*, Xuecheng Xi and Lin Gu
The Journal of Mechanical Science and Technology, vol. 26, no. 6, pp.1885-1890, 2012
Analysis of dynamic stability in a turning process based on a 2-DOFs model with overlap factor
Laixi Zhang, Xingsong Wang* and Shulin Liu
The Journal of Mechanical Science and Technology, vol. 26, no. 6, pp.1891-1899, 2012
Development of a reduced relaxation function and comparison of stress relaxation for anatomically paired tendons
Keyoung Jin Chun
The Journal of Mechanical Science and Technology, vol. 23, no. 7, pp.1893-1898, 2009
Optimization of mixed casting processes considering discrete ingot sizes
Yong Kuk Park
The Journal of Mechanical Science and Technology, vol. 23, no. 7, pp.1899-1910, 2009
New approach to designing an MR brake using a small steel roller and MR fluid
Tran Hai NAM
The Journal of Mechanical Science and Technology, vol. 23, no. 7, pp.1911-1923, 2009
Characteristics of complicated AISI316L automobile components manufactured by powder/metallurgy
L. Zhong Liang
The Journal of Mechanical Science and Technology, vol. 23, no. 7, pp.1924-1931, 2009
Investigation of penetration force of living cell using an atomic force microscope
Eun-Young Kwon
The Journal of Mechanical Science and Technology, vol. 23, no. 7, pp.1932-1938, 2009
Automatic simplification of solid models for engineering analysis independent of modeling sequences
Yoonhwan Woo
The Journal of Mechanical Science and Technology, vol. 23, no. 7, pp.1939-1948, 2009
Nanomechanics of biomolecules: focus on DNA
Y. Eugene Pak
The Journal of Mechanical Science and Technology, vol. 23, no. 7, pp.1949-1958, 2009
Environmentally conscious hard turning of cemented carbide materials on the basis of micro-cutting in SEM (2nd report): stress turning with three kinds of cutting tools
HEO Sung Jung
The Journal of Mechanical Science and Technology, vol. 23, no. 7, pp.1959-1966, 2009
A rational B-spline hypervolume for multidimensional multivariate modeling
Sangkun Park
The Journal of Mechanical Science and Technology, vol. 23, no. 7, pp.1967-1981, 2009
Micro machining of an STS 304 bar by magnetic abrasive finishing
Ik-Tae Im
The Journal of Mechanical Science and Technology, vol. 23, no. 7, pp.1982-1988, 2009
Study on the improved accuracy of strip profile using numerical formula model in continuous cold rolling with 6-high mill
Sang-Ho Lee, Gil-Ho Song, Sung-Jin Lee and Byung-Min Kim*
The Journal of Mechanical Science and Technology, vol. 25, no. 8, pp.2101-2109, 2011
On the wear mechanism of thin nickel film during AFM-based scratching process using molecular dynamics
Hanif Muhammad Khan and Sung-Gaun Kim*
The Journal of Mechanical Science and Technology, vol. 25, no. 8, pp.2111-2120, 2011
Research on flexible job-shop scheduling problem based on a modified genetic algorithm
Wei Sun, Ying Pan*, Xiaohong Lu and Qinyi Ma
The Journal of Mechanical Science and Technology, vol. 24, no. 10, pp.2119-2125, 2010
Optimization of process parameters for recycling of mill scale using Taguchi experimenal design
Seok-Heum Baek, Soon-Hyeok Hong, Seok-Swoo Cho*, Deuk-Yul Jang and Won-Sik Joo
The Journal of Mechanical Science and Technology, vol. 24, no. 10, pp.2127-2134, 2010
Optimization of bending sequence in roll forming using neural network and genetic algorithm
Hong-Seok Park* and Tran-Viet Anh
The Journal of Mechanical Science and Technology, vol. 25, no. 8, pp.2127-2136, 2011
Research on torsional fretting wear behaviors and damage mechanisms of stranded-wire helical spring
Shilong Wang*, Xiaoyong Li, Song Lei, Jie Zhou and Yong Yang
The Journal of Mechanical Science and Technology, vol. 25, no. 8, pp.2137-2147, 2011
Development of an authoring framework for the simplified customization of PDM systems
In-Ho Song
The Journal of Mechanical Science and Technology, vol. 22, no. 11, pp.2180-2189, 2008
Development of rapid mask fabrication technology for micro-abrasive jet machining
Seung Pyo Lee
The Journal of Mechanical Science and Technology, vol. 22, no. 11, pp.2190-2196, 2008
Design of continuity processes of electrochemical finishing and grinding following turning
P. S. Pa
The Journal of Mechanical Science and Technology, vol. 22, no. 11, pp.2197-2202, 2008
AFM-based identification of the dynamic properties of globular proteins: simulation study
Deok-Ho Kim
The Journal of Mechanical Science and Technology, vol. 22, no. 11, pp.2203-2212, 2008
Analysis of pulsed Nd:YAG laser welding of AISI 304 steel
Kwanwoo Kim, Jungkil Lee, Haeyong Cho*
The Journal of Mechanical Science and Technology, vol. 24, no. 11, pp.2253-2259, 2010
Design and development of PCD micro straight edge end mills for micro/nano machining of hard and brittle materials
Xiang Cheng*, Zhigang Wang, Kazuo Nakamoto, Kazuo Yamazaki
The Journal of Mechanical Science and Technology, vol. 24, no. 11, pp.2261-2268, 2010
Analysis of five- and six-machine micro-factory layouts for micro-pump productivity improvement
Murali Subramaniyam, Sangho Park*, Jong Kweon Park
The Journal of Mechanical Science and Technology, vol. 24, no. 11, pp.2269-2273, 2010
Complexity of cellular manufacturing systems based on entropy mo
Zhifeng Zhang
The Journal of Mechanical Science and Technology, vol. 24, no. 11, pp.2275-2280, 2010
A study of the control of the blank holding force using an MR damper in a drawing press
Young-Won Yun, Hyung-Sub Bae, Myeong-Kwan Park*
The Journal of Mechanical Science and Technology, vol. 24, no. 11, pp.2281-2288, 2010
Analytical model for predicting the surface profile of a work piece in round-to-2–R and square-to-2–R oval groove rolling
U. K. Yoo, J. B. Lee, J. H. Park, Y. Lee*
The Journal of Mechanical Science and Technology, vol. 24, no. 11, pp.2289-2295, 2010
Pyramid as test geometry to evaluate formability in incremental forming: Recent results
Ghulam Hussain*, Nasir Hayat and Gao Lin
The Journal of Mechanical Science and Technology, vol. 26, no. 8, pp.2337-2345, 2012
Modeling the geometric formation and powder deposition mass in laser induction hybrid cladding
Yongjun Huang and Shengfa Yuan*
The Journal of Mechanical Science and Technology, vol. 26, no. 8, pp.2347-2351, 2012
A study of material removal amount of sapphire wafer in application of chemical mechanical polishing with different polishing pads
Zone-Ching Lin*, Wei- Shuen Huang and Ju- Shiau Tsai
The Journal of Mechanical Science and Technology, vol. 26, no. 8, pp.2353-2364, 2012
Optimization and modeling of spot welding parameters with simultaneous multiple response consideration using multi-objective Taguchi method and RSM
Norasiah Muhammad, Yupiter HP Manurung*, Mohammad Hafidzi, Sunhaji Kiyai Abas, Ghalib Tham and Esa Haruman
The Journal of Mechanical Science and Technology, vol. 26, no. 8, pp.2365-2370, 2012
An investigation on use of colemanite powder as abrasive in abrasive waterjet cutting (AWJC)
Gulay Cosansu and Can Cogun*
The Journal of Mechanical Science and Technology, vol. 26, no. 8, pp.2371-2380, 2012
Real-time data acquisition system and HMI for MES
SeungWoo Lee*, So Jeong Nam and Jai-Kyung Lee
The Journal of Mechanical Science and Technology, vol. 26, no. 8, pp.2381-2388, 2012
Experimental study on ECM with a grid cathode composed of circular cells
Yonghua Lu*, Dongbiao Zhao and Kai Liu
The Journal of Mechanical Science and Technology, vol. 26, no. 8, pp.2389-2396, 2012
Improvement of formability for fabricating thin continuously corrugated structures in sheet metal forming process
"Sung-Woo Choi, Sang Hu Park*, Ho-Seung Jeong, JongRae Cho, Seonghun Park
The Journal of Mechanical Science and Technology, vol. 26, no. 8, pp.2397-2403, 2012
Investigation of cutting characteristics for worm machining on automatic lathe – Comparison of planetary milling and side milling
MinHwan Lee
The Journal of Mechanical Science and Technology, vol. 22, no. 12, pp.2454-2463, 2008
Development of a guiding system and visual feedback real-time controller for the high-speed self-align optical cable winding
Changwoo Lee
The Journal of Mechanical Science and Technology, vol. 22, no. 12, pp.2464-2474, 2008
Classification of esophagitis grade by neural network and texture analysis
Kwang-wook Seo
The Journal of Mechanical Science and Technology, vol. 22, no. 12, pp.2475-2480, 2008
Human response of vertical and pitch motion to vertical vibration on whole body according to sitting posture
"Min-Seok Kim, Gyeoung-Jin Jeon, Jae-Young Lee, Se-Jin Ahn*, Wan-Suk Yoo and Weui-Bong Jeong
The Journal of Mechanical Science and Technology, vol. 26, no. 8, pp.2477-2484, 2012
Design of intermediate die shape of multistage profile drawing for linear motion guide
Sang-Kon Lee, Jae-Eun Lee, Sung-Min Kim, Byung-Min Kim*
The Journal of Mechanical Science and Technology, vol. 24, no. 12, pp.2539-2544, 2010
Robust design of roll-formed slide rail using response surface method
Minjin Oh, Moon Kyu Lee, Naksoo Kim*
The Journal of Mechanical Science and Technology, vol. 24, no. 12, pp.2545-2553, 2010
The development of embedded device to detect chatter vibration in machine tools and CNC-based autonomous compensation
Dong-Hoon Kim*, Jun-Yeob Song, Suk-Keun Cha and Hungsun Son
The Journal of Mechanical Science and Technology, vol. 25, no. 10, pp.2623-2630, 2011
Electrospinning of cellulose and SWNT-cellulose nano fibers for smart applications
Alex Pankonian, Zoubeida Ounaies* and Chulho Yang*
The Journal of Mechanical Science and Technology, vol. 25, no. 10, pp.2631-2639, 2011
Simulation and experimental study on distortion of butt and T-joints using WELD PLANNER
Mohd Shahar Sulaiman, Yupiter HP Manurung*, Esa Haruman, Mohammad Ridzwan Abdul Rahim, Mohd Ridhwan Redza, Robert Ngendang Ak. Lidam, Sunhaji Kiyai Abas, Ghalib Tham and Chan Yin Chau
The Journal of Mechanical Science and Technology, vol. 25, no. 10, pp.2641-2646, 2011
Development and evaluation of intelligent machine tools based on knowledge evolution in M2M environment
Dong-Hoon Kim, Jun-Yeob Song, Jong-Hyun Lee, Suk-Keun Cha
The Journal of Mechanical Science and Technology, vol. 23, no. 10, pp.2807-2813, 2009
Signal analysis and real-time monitoring for wafer polishing processes using the ch computing environment
Eun Sang Lee, Sung Chul Hwang, Jung Taik Lee, Jong Koo Won, Harry H. Cheng
The Journal of Mechanical Science and Technology, vol. 23, no. 10, pp.2814-2822, 2009
The characteristics of cutting forces in the micro-milling of AISI D2 steel
Cheng-Zhe Jin, Ik-Soo Kang, Jin-Hyo Park, Su-Hoon Jang, Jeong-Suk Kim
The Journal of Mechanical Science and Technology, vol. 23, no. 10, pp.2823-2829, 2009
Electrode layout of ZnO pyroelectric sensors
Chun-Ching Hsiao* and Shih-Yuan Yu
The Journal of Mechanical Science and Technology, vol. 25, no. 11, pp.2835-2842, 2011
Modeling and optimization of hard turning of X38CrMoV5-1 steel with CBN tool: Machining parameters effects on flank wear and surface roughness
Hamdi Aouici*, Mohamed Athmane Yallese, Brahim Fnides, Kamel Chaoui and Tarek Mabrouki
The Journal of Mechanical Science and Technology, vol. 25, no. 11, pp.2843-2851, 2011
Effect of the size and morphology of particles dispersed in nano-oil on friction performance between rotating discs
Yujin Hwang, Changgun Lee, Youngmin Choi, Seongir Cheong, Doohyun Kim, Kwangho Lee, Jaekeun Lee and Soo Hyung Kim*
The Journal of Mechanical Science and Technology, vol. 25, no. 11, pp.2853-2857, 2011
Plastic limit analysis with non linear kinematic strain hardening for metalworking processes applications
Ali Chaaba*, Lahbib Bousshine, Mohamed Aboussaleh and El Hassan Boudaia
The Journal of Mechanical Science and Technology, vol. 25, no. 11, pp.2859-2870, 2011
Prediction of void closure in a slab during various deformation processes
Jong-Jin Park*
The Journal of Mechanical Science and Technology, vol. 25, no. 11, pp.2871-2876, 2011
Surface roughness prediction through internal kernel information and external accelerometers using artificial neural networks
Guillem Quintana, Thomas Rudolf, Joaquim Ciurana* and Christian Brecher
The Journal of Mechanical Science and Technology, vol. 25, no. 11, pp.2877-2886, 2011
Laser welding of cast iron and carburized steel for differential gear
Jiyoung Yu, Taikmin Jung, Sulae Kim and Sehun Rhee*
The Journal of Mechanical Science and Technology, vol. 25, no. 11, pp.2887-2893, 2011
Effect of the cut-off frequency on rough-point and flat-surface contacts
Fanming Meng
The Journal of Mechanical Science and Technology, vol. 26, no. 9, pp.2889-2901, 2012
Analysis of wire-drawing process with friction and thermal conditions obtained by inverse engineering
Changsun Moon and Naksoo Kim*
The Journal of Mechanical Science and Technology, vol. 26, no. 9, pp.2903-2911, 2012
Increasing the drawing height of conical square cups using anti-lock braking system (ABS)
Muammer Gavas
The Journal of Mechanical Science and Technology, vol. 23, no. 11, pp.3079-3087, 2009
A new planar 3-DOF parallel mechanism with continuous 360-degree rotational capability
TaeWon Seo/Woosung In/Jongwon Kim
The Journal of Mechanical Science and Technology, vol. 23, no. 11, pp.3088-3094, 2009
Bubble growth in mold cavities during microcellular injection molding processes
Yongrak Moon/Kyoung-soo Lee/Sung W. Cha
The Journal of Mechanical Science and Technology, vol. 23, no. 12, pp.3349-3356, 2009
Construction of the radial basis function based on a sequential sampling approach using cross-validation
Byeongsoo Kim/Yongbin Lee/Dong-Hoon Choi
The Journal of Mechanical Science and Technology, vol. 23, no. 12, pp.3357-3365, 2009
Development of an automatic vegetable bundling machine using thermal bonding
Yong-Seok Kim/Soon-Yong Yang
The Journal of Mechanical Science and Technology, vol. 23, no. 12, pp.3366-3373, 2009
Strain gradient plasticity based finite element analysis of ultra-fine wire drawing process
S. M. Byon/C. H. Moon/Y. Lee
The Journal of Mechanical Science and Technology, vol. 23, no. 12, pp.3374-3384, 2009
 
 
 
JMST Editorial Office: 1556, 301 Bldg., Mechanical and Aerospace Engineering,
Seoul National University, San 56-1 Shinlim-Dong, Kwanak-Ku, Seoul 151-744, Korea
TEL: +82-70-4063-1600, E-mail: editorial@j-mst.org
JMST Production Office: Room 702, KSTC New Building, 635-4, Yeogsam-dong, Gangnam-gu, Seoul 135-703, Korea
TEL: +82-2-501-6056, FAX: +82-2-501-3649, E-mail: editorial@ksme.or.kr