Published Papers
     Search Papers (Springer,
   After 2008)
     Search Papers (Dbpia,
   Until 2007)
     Search Papers (JMST
   own data base)
       - Classification By Year   
       - Classification By Topic
     Special Issues
   
           
   
 
 
Subject Keyword Abstract Author
 
 
Categories
Fluids Engineering
CFD Investigation on the aerodynamic characteristics of a small-sized wind turbine of NREL PHASE VI operating with a stall-regulated method
Jang-Oh MO and Young-Ho LEE*
The Journal of Mechanical Science and Technology, vol. 26, no. 1, pp.81-92, 2012
A numerical study of secondary flow and large eddies in a driven cavity
Y. H. Yau*, A. Badarudin and P. A. Rubini
The Journal of Mechanical Science and Technology, vol. 26, no. 1, pp.93-102, 2012
Prediction of transient lubricating oil flows within the connecting-rod of a diesel engine
Shin-Hyoung Kang*, Jeon-Gu Kim, Kyung-Nam Chung
The Journal of Mechanical Science and Technology, vol. 25, no. 1, pp.103-109, 2011
Determination of permeability and inertial resistance coefficient of filter inserts used in the cleaning of natural gas
Mária Čarnogurská*, Miroslav Příhoda, Tomáš Brestovič, Jiří Molínek and René Pyszko
The Journal of Mechanical Science and Technology, vol. 26, no. 1, pp.103-111, 2012
Stability analysis of wakes with density gradient
Dongshin Shin
The Journal of Mechanical Science and Technology, vol. 25, no. 1, pp.111-115, 2011
Multi-scale filling simulation of micro-injection molding process
Sung-Joo Choi, Sun Kyoung Kim*
The Journal of Mechanical Science and Technology, vol. 25, no. 1, pp.117-124, 2011
Response characteristics of a vortex-excited circular cylinder in laminar flow
M. H. Bahmani, M. H. Akbari*
The Journal of Mechanical Science and Technology, vol. 25, no. 1, pp.125-133, 2011
An experimental apparatus measuring convective heat transfer coefficient from a heated fine wire traversing in nanofluids
Shinpyo Lee
The Journal of Mechanical Science and Technology, vol. 25, no. 1, pp.135-142, 2011
Three dimensional aerodynamic characteristics of weis-fogh mechanism
Ki-Deok Ro
The Journal of Mechanical Science and Technology, vol. 23, no. 1, pp.262-268, 2009
The development of a GUI program for automated generating rotor blade airfoil performance table
Kwanjung Yee
The Journal of Mechanical Science and Technology, vol. 23, no. 1, pp.269-280, 2009
A study on the contact angles of a water droplet on smooth and rough solid surfaces
Ju-Young Park, Man-Yeong Ha*, Ho-Jin Choi, Seung-Do Hong, Hyun-Sik Yoon
The Journal of Mechanical Science and Technology, vol. 25, no. 2, pp.323-332, 2011
Magnetic field effect on fluid flow characteristics in a pipe for laminar flow
Asadolah Malekzadeh1,*, Amir Heydarinasab1 and Bahram Dabir2
The Journal of Mechanical Science and Technology, vol. 25, no. 2, pp.333-339, 2011
Study on the compressible viscous flows through a straight pipe
Vincent Lijo, Heuy Dong Kim*, Toshiaki Setoguchi, Shigeru Matsuo
The Journal of Mechanical Science and Technology, vol. 25, no. 2, pp.341-347, 2011
A study of the torque characteristics of small disk brake using magnetic fluid
Hyung-Sub Bae, Myeong-Kwan Park*
The Journal of Mechanical Science and Technology, vol. 25, no. 2, pp.349-355, 2011
Experimental investigation of particle distribution in a flow through a stenosed artery
Anis Shuib*, Peter Hoskins, William Easson
The Journal of Mechanical Science and Technology, vol. 25, no. 2, pp.357-364, 2011
Effect of flow conditions on spray cone angle of a two-fluid atomizer
Maziar Shafaee*, Sayed Abdolhossein Banitabaei, Mehdi Ashjaee, Vahid Esfahanian
The Journal of Mechanical Science and Technology, vol. 25, no. 2, pp.365-369, 2011
Analysis and design of an axial piston water-pump with piston valve
Luo Xiaohui*, Niu Zihua, Shi Zhaocun, Hu Junhua
The Journal of Mechanical Science and Technology, vol. 25, no. 2, pp.371-378, 2011
Flow around a flexible plate in a free stream
JiSeok Lee, SangHwan Lee*
The Journal of Mechanical Science and Technology, vol. 25, no. 2, pp.379-390, 2011
Maximum suction lift of water jet pumps
Iran E. Lima Neto
The Journal of Mechanical Science and Technology, vol. 25, no. 2, pp.391-394, 2011
Experimental and numerical study of heat transfer downstream of an axisymmetric abrupt expansion and in a cavity of a circular tube
Dae Hee Lee*, Jun Sik Lee, Hyun Jin Park, Moon Kyung Kim
The Journal of Mechanical Science and Technology, vol. 25, no. 2, pp.395-401, 2011
Study on low pressure evaporation of fresh water generation system model
Hanshik Chung, Supriyanto Wibowo, Berkah Fajar, Yonghan Shin and Hyomin Jeong*
The Journal of Mechanical Science and Technology, vol. 26, no. 2, pp.421-426, 2012
TR-PIV measurement of separated and reattaching turbulent flow over a surface-mounted square cylinder
Liu Liu SHI/Ying Zheng LIU/Jin Jin WAN
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.421-428, 2010
An optimal design for axial-flow fan blade: theoretical and experimental studies
Cheng-Hung Huang* and Chung-Wei Gau
The Journal of Mechanical Science and Technology, vol. 26, no. 2, pp.427-436, 2012
Unsteady boundary layer for a pitching airfoil at low Reynolds numbers
Dong-Ha Kim/Jo-Won Chang
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.429-440, 2010
Unsteady flow field numerical calculations of a ship’s rotating Weis-Fogh-type propulsion mechanism with the advanced vortex method
Ki-Deok Ro*, Baoshan Zhu and Michihisa Tsutahara
The Journal of Mechanical Science and Technology, vol. 26, no. 2, pp.437-446, 2012
A numerical study on the flow and mixing in a microchannel using magnetic particles
Thanh Nga Le/Yong Kweon Suh/Sangmo Kang
The Journal of Mechanical Science and Technology, vol. 24, no. 1, pp.441-450, 2010
Laminar and turbulent channel flow simulation using residual based variational multi-scale method
Yousef Ghaffari Motlagh and Hyung Taek Ahn*
The Journal of Mechanical Science and Technology, vol. 26, no. 2, pp.447-454, 2012
Enhancement of wind turbine aerodynamic performance by a numerical optimization technique
Hyung Il Kwon, Ju Yeol You and Oh Joon Kwon*
The Journal of Mechanical Science and Technology, vol. 26, no. 2, pp.455-462, 2012
Reconstruction of time-domain impedance boundary condition considering the incident intensity effect on perforated-plate acoustic liner
Minwoo Kim, Jonghoon Bin and Soogab Lee*
The Journal of Mechanical Science and Technology, vol. 26, no. 2, pp.463-471, 2012
Modeling and experimental evaluation of torque loss in turbine test rig for accurate turbine performance evaluation
Jeong-Seek Kang* and Soo-Seok Yang
The Journal of Mechanical Science and Technology, vol. 26, no. 2, pp.473-479, 2012
Effect of the personalized ventilation on indoor air quality for an indoor occupant with VOCs emission from carpet
Jiaqing Zhou and Chang Nyung Kim*
The Journal of Mechanical Science and Technology, vol. 26, no. 2, pp.481-488, 2012
Fast-response total pressure probe for turbomachinery application
Jeong-Seek Kang/Soo-Seok Yang
The Journal of Mechanical Science and Technology, vol. 24, no. 2, pp.569-574, 2010
Solid-liquid mixture flow through a slim hole annulus with rotating inner cylinder
Sang-mok Han
The Journal of Mechanical Science and Technology, vol. 23, no. 2, pp.569-577, 2009
Experimental study on hydrodynamic performance of a cavitating centrifugal pump during transient operation
Dazhuan Wu/Leqin Wang/Zongrui Hao/Zhifeng Li/Zhiren Bao
The Journal of Mechanical Science and Technology, vol. 24, no. 2, pp.575-582, 2010
Laminar flow past a sphere rotating in the transverse direction
Dongjoo Kim
The Journal of Mechanical Science and Technology, vol. 23, no. 2, pp.578-589, 2009
Flow response of magnetic fluid surface by pitching motion
Hyung-Sub Bae/Young-Won Yun/Myeong-Kwan Park
The Journal of Mechanical Science and Technology, vol. 24, no. 2, pp.583-592, 2010
Numerical investigation of transient side-loads in the start-up process of a rocket nozzle
Vincent Lijo/Heuy Dong Kim/Toshiaki Setoguchi/Shigeru Matsuo
The Journal of Mechanical Science and Technology, vol. 24, no. 2, pp.593-599, 2010
Reduced order model of three-dimensional Euler equations using proper orthogonal decomposition basis
Sangook Jun/Kyung-Hyun Park/Hyung-Min Kang/Dong-Ho Lee/Maenghyo Cho
The Journal of Mechanical Science and Technology, vol. 24, no. 2, pp.601-608, 2010
Design optimization of a loop heat pipe to cool a lithium ion battery onboard a military aircraft
YongJin Park/Sangook Jun/Sanghun Kim/Dong-Ho Lee
The Journal of Mechanical Science and Technology, vol. 24, no. 2, pp.609-618, 2010
Convergence acceleration of Navier-Stokes equation using adaptive wavelet method
Hyungmin Kang/Imran Ghafoor/Dohyung Lee
The Journal of Mechanical Science and Technology, vol. 24, no. 2, pp.619-627, 2010
Design of surge tank for water supply systems using the impulse response method with the GA algorithm
Sang-Hyun Kim
The Journal of Mechanical Science and Technology, vol. 24, no. 2, pp.629-636, 2010
Prediction of thermoacoustic instability in Rijke tube using CFD-CAA numerical method
Woo-Seog Song, Seungbae Lee*, Dong-Shin Shin
The Journal of Mechanical Science and Technology, vol. 25, no. 3, pp.675-682, 2011
Stability analysis of reacting mixing layers with density gradient and wake deficit
Dongshin Shin*
The Journal of Mechanical Science and Technology, vol. 25, no. 3, pp.683-688, 2011
A study on the optimal design of a cyclone system for vacuum cleaner with the consideration of house dust
Gunho Ha, Eungdal Kim, Youngsoo Kim, Jaekeun Lee, Youngchull Ahn*, Donggyu Kim
The Journal of Mechanical Science and Technology, vol. 25, no. 3, pp.689-694, 2011
Fundamental studies on free stream acceleration effect on drag force in bluff bodies
Yeongbin Lee, Joohyun Rho1 Kyu Hong Kim*, Dong-Ho Lee
The Journal of Mechanical Science and Technology, vol. 25, no. 3, pp.695-701, 2011
An efficient CFD-based method for aircraft icing simulation using a reduced order model
Sung Ki Jung, Sungmin Shin, Rho Shin Myong*, Tae Hwan Cho
The Journal of Mechanical Science and Technology, vol. 25, no. 3, pp.703-711, 2011
Large eddy simulation of turbulent premixed combustion flows over backward facing step
Nam Seob Park, Sang Cheol Ko*
The Journal of Mechanical Science and Technology, vol. 25, no. 3, pp.713-719, 2011
Large eddy simulation of flow characteristics in an unconfined slot impinging jet with various nozzle-to-plate distances
Hongyun So, Hyun Gi Yoon*, Myung Kyoon Chung
The Journal of Mechanical Science and Technology, vol. 25, no. 3, pp.721-729, 2011
Reliability-based design optimization of axial compressor using uncertainty model for stall margin
Sangwon Hong, Saeil Lee, Sangook Jun, Dong-Ho Lee*, Hyungmin Kang, Young-Seok Kang, Soo-Seok Yang
The Journal of Mechanical Science and Technology, vol. 25, no. 3, pp.731-740, 2011
A study on the MHD (magnetohydrodynamic) micropump with side-walled electrodes
Sangsoo Lim
The Journal of Mechanical Science and Technology, vol. 23, no. 3, pp.739-749, 2009
A hybrid time-stepping method of local preconditioning on high aspect ratio grids
Jae Eun Lee, Yoonsik Kim, Jang Hyuk Kwon*
The Journal of Mechanical Science and Technology, vol. 25, no. 3, pp.741-747, 2011
Experimental and numerical study of transient flow in a centrifugal pump during startup
Zhifeng Li, Peng Wu, Dazhuan Wu*, Leqin Wang
The Journal of Mechanical Science and Technology, vol. 25, no. 3, pp.749-757, 2011
Year-to-year variation in wind resource and assessment of WAsP prediction for wind machine power
Kyungnam Ko
The Journal of Mechanical Science and Technology, vol. 23, no. 3, pp.750-757, 2009
Application of averaging bidirectional flow tube for measurement of single-phase flow rate in a piping system
Kyoung-Ho KANG
The Journal of Mechanical Science and Technology, vol. 23, no. 3, pp.758-767, 2009
Numerical study on control derivatives of a high-speed underwater vehicle
Haedong Kim*, Hyeonjin Cho
The Journal of Mechanical Science and Technology, vol. 25, no. 3, pp.759-765, 2011
Numerical investigation of suction vortices behavior in centrifugal pump
Young-Joon An, Byeong Rog Shin*
The Journal of Mechanical Science and Technology, vol. 25, no. 3, pp.767-772, 2011
Investigation on the turbulent stress anisotropy of axisymmetric turbulence under rapid rotation
Ju Yeop Park
The Journal of Mechanical Science and Technology, vol. 23, no. 3, pp.768-774, 2009
A second-order time-accurate finite element method for analysis of conjugate heat transfer between solid and unsteady viscous flow
Atipong Malatip
The Journal of Mechanical Science and Technology, vol. 23, no. 3, pp.775-789, 2009
A numerical simulation of train-induced unsteady airflow in a tunnel of Seoul subway
Yuandong Huang, Tae Hyub Hong and Chang Nyung Kim*
The Journal of Mechanical Science and Technology, vol. 26, no. 3, pp.785-792, 2012
Combined finite volume and finite element method for convection-diffusion-reaction equation
Sutthisak Phongthanapanich
The Journal of Mechanical Science and Technology, vol. 23, no. 3, pp.790-801, 2009
Output power measurement of a blood pump considering pulsating flows
Sejong Chun and Jonghan Jin*
The Journal of Mechanical Science and Technology, vol. 26, no. 3, pp.793-798, 2012
Study of the characteristics of forced homogeneous turbulence using band-pass Fourier filtering
Waleed Abdel Kareem*
The Journal of Mechanical Science and Technology, vol. 26, no. 3, pp.799-809, 2012
Computational study on aerodynamics of long-span bridges
Ilyong Yoo
The Journal of Mechanical Science and Technology, vol. 23, no. 3, pp.802-813, 2009
Numerical study of gas-solid reactive flow in a cylinder
Ardeshir Bangian Tabrizi*, Mehrzad Shams and Reza Ebrahi
The Journal of Mechanical Science and Technology, vol. 26, no. 3, pp.811-817, 2012
Electroosmotically enhanced microchannel heat sinks
Afzal Husain
The Journal of Mechanical Science and Technology, vol. 23, no. 3, pp.814-822, 2009
The effects of the tilt angle of a bileaflet mechanical heart valve on blood flow and leaflet motion
Chang Nyung Kim* and Taehyup Hong
The Journal of Mechanical Science and Technology, vol. 26, no. 3, pp.819-825, 2012
Approximate velocity scale for primary and secondary dual-inlet side-dump flows
Seung-chai Jung
The Journal of Mechanical Science and Technology, vol. 23, no. 3, pp.823-835, 2009
Design optimization of a wind turbine blade to reduce the fluctuating unsteady aerodynamic load in turbulent wind
Jihoon Jeong, Kyunghyun Park, Sangook Jun, Kisun Song and Dong-Ho Lee*
The Journal of Mechanical Science and Technology, vol. 26, no. 3, pp.827-838, 2012
Performance improvement of weis-fogh type ship’s propulsion mechanism using rubber type elastic wing
Ki-Deok Ro
The Journal of Mechanical Science and Technology, vol. 23, no. 3, pp.836-844, 2009
Development and validation of stereoscopic micro-PTV using match probability
Cheong-Hwan Yu
The Journal of Mechanical Science and Technology, vol. 23, no. 3, pp.845-855, 2009
The effect of nonequilibrium condensation on hysteresis phenomenon of under-expanded jets
Heuy-Dong Kim
The Journal of Mechanical Science and Technology, vol. 23, no. 3, pp.856-867, 2009
Effect of dextran on rheological properties of rat blood
Sangho Kim
The Journal of Mechanical Science and Technology, vol. 23, no. 3, pp.868-873, 2009
A study on the slip velocity on a pair of asymmetric electrodes for AC-electroosmosis in a microchannel
Yangyang Wang
The Journal of Mechanical Science and Technology, vol. 23, no. 3, pp.874-884, 2009
Multi-shape erythrocyte deformability analysis by imaging technique
Sanjay Jayavanth/Dong Hwan Lee/Bock Choon Pak
The Journal of Mechanical Science and Technology, vol. 24, no. 4, pp.931-935, 2010
The effect of PSD on life safety in subway station fire
Jae Seong Roh/Hong Sun Ryou/Sung Wook Yoon
The Journal of Mechanical Science and Technology, vol. 24, no. 4, pp.937-942, 2010
Exploiting the orbital motion of water particles for energy extraction from waves
M. Ahmed/M. Faizal/K. Prasad/Y. Cho/C. Kim/Y. Lee
The Journal of Mechanical Science and Technology, vol. 24, no. 4, pp.943-949, 2010
PIV study of vortexing during draining from square tanks
C. H. Sohn/M. G. Ju/B. H. L. Gowda
The Journal of Mechanical Science and Technology, vol. 24, no. 4, pp.951-960, 2010
Heat transfer and pressure drop amidst frost layer presence for the full geometry of fin-tube heat exchanger
S.-J. Kim/H.-J. Choi/M.-Y. Ha/S.-R. Kim/S.-W. Bang
The Journal of Mechanical Science and Technology, vol. 24, no. 4, pp.961-969, 2010
Numerical simulation of water flow in an axial flow pump with adjustable guide vanes
Zhongdong QIAN/Yan WANG/Wenxin HUAI/Youngho LEE
The Journal of Mechanical Science and Technology, vol. 24, no. 4, pp.971-976, 2010
Structure analysis of bubble driven flow by time-resolved PIV and POD techniques
Hyun Dong Kim/Seung Jae Yi/Jong Wook Kim/Kyung Chun Kim
The Journal of Mechanical Science and Technology, vol. 24, no. 4, pp.977-982, 2010
Numerical study on leakage detection and location in a simple gas pipeline branch using an array of pressure sensors
S. Jang/C. Cho/J. Nam/S. Lim/D. Shin/T. Chung
The Journal of Mechanical Science and Technology, vol. 24, no. 4, pp.983-990, 2010
A level-set method for analysis of microdroplet evaporation on a heated surface
Gihun Son
The Journal of Mechanical Science and Technology, vol. 24, no. 4, pp.991-997, 2010
Response of passive scalar to momentum disturbance in a transpired channel with wall injection
Dongshin Shin/Yang Na
The Journal of Mechanical Science and Technology, vol. 24, no. 4, pp.999-1005, 2010
Multi-objective optimization of an axial compressor blade
Kwang-Yong Kim
The Journal of Mechanical Science and Technology, vol. 22, no. 5, pp.999-1007, 2008
Two-fluid Herschel-Bulkley model for blood flow in catheterized arteries
Usik Lee
The Journal of Mechanical Science and Technology, vol. 22, no. 5, pp.1008-1018, 2008
An investigation of higher-order closures in the computation of the flow around a generic car
Yong-Jun Jang
The Journal of Mechanical Science and Technology, vol. 22, no. 5, pp.1019-1029, 2008
Numerical simulation of flow past rectangular cylinders with different aspect ratios using the incompressible lattice Boltzmann method
S. Ul Islam, C. Y. Zhou*, A. Shah and P. Xie
The Journal of Mechanical Science and Technology, vol. 26, no. 4, pp.1027-1041, 2012
Investigation on the liquid water droplet instability in a simulated flow channel of PEM fuel cell
Kyoungdoug Min
The Journal of Mechanical Science and Technology, vol. 22, no. 5, pp.1030-1036, 2008
Numerical simulation of rotordynamic coefficients for eccentric annular-type-plain-pump seal using CFD analysis
Tae Woong Ha* and Bok Seong Choe
The Journal of Mechanical Science and Technology, vol. 26, no. 4, pp.1043-1048, 2012
Laser velocimetry of a plane mixing layer with a specific initial condition for study of turbulence characteristics of enhanced growth rate
Mojtaba Mehrjooei, Nader Montazerin* and Abraham Damangir
The Journal of Mechanical Science and Technology, vol. 26, no. 4, pp.1049-1057, 2012
Quantitative analysis of a two-dimensional ice accretion on airfoils
Chankyu Son, Sejong Oh and Kwanjung Yee*
The Journal of Mechanical Science and Technology, vol. 26, no. 4, pp.1059-1071, 2012
Numerically analyzed supersonic flow structure behind the exit of a two-dimensional micro nozzle
Sungcho Kim
The Journal of Mechanical Science and Technology, vol. 22, no. 6, pp.1174-1180, 2008
LBM simulation on mixing enhancement by the effect of heterogeneous zeta-potential in a microchannel
Yong Kweon Suh
The Journal of Mechanical Science and Technology, vol. 22, no. 6, pp.1181-1191, 2008
A dynamic boundary model for implementation of boundary conditions in lattice-Boltzmann method
Yong Kweon Suh
The Journal of Mechanical Science and Technology, vol. 22, no. 6, pp.1192-1201, 2008
Natural convection between concentric spheres in electromagnetic fields
Chung-Hyo Jung
The Journal of Mechanical Science and Technology, vol. 22, no. 6, pp.1202-1212, 2008
A computational study of inviscid hypersonic flows using energy relaxation method
H. D. Kim
The Journal of Mechanical Science and Technology, vol. 22, no. 6, pp.1213-1221, 2008
Wave overtopping simulations over coastal structures
Jong-Chun Park
The Journal of Mechanical Science and Technology, vol. 22, no. 6, pp.1222-1229, 2008
Investigation of ship maneuvering with hydrodynamic effects between ship and bank
Chun-Ki Lee
The Journal of Mechanical Science and Technology, vol. 22, no. 6, pp.1230-1236, 2008
Effects of ALR and configuration ratio on turbulent structures in swirling flows
Sam-Goo Lee
The Journal of Mechanical Science and Technology, vol. 22, no. 6, pp.1237-1243, 2008
Experimental analysis about the magnitude of the shaft frequency growth near stall in the axial compressor
Hyung-Soo Lim*, Young-Cheon Lim, Shin-Hyoung Kang, Seung-Jin Song, Soo-Seok Yang
The Journal of Mechanical Science and Technology, vol. 25, no. 5, pp.1317-1324, 2011
Experimental analysis of transverse jet using various decomposition techniques
Seyfettin Bayraktar* and Tamer Yilmaz
The Journal of Mechanical Science and Technology, vol. 25, no. 5, pp.1325-1333, 2011
Wind turbine airfoil design using response surface method
Hyosung Sun*
The Journal of Mechanical Science and Technology, vol. 25, no. 5, pp.1335-1340, 2011
Numerical simulation for prediction of aerodynamic noise characteristics on a HAWT of NREL phase VI
Jang-Oh Mo1 and Young-Ho Lee2,*
The Journal of Mechanical Science and Technology, vol. 25, no. 5, pp.1341-1349, 2011
Influence of blade-tower interaction in upwind-type horizontal axis wind turbines on aerodynamics
Hogeon Kim, Seungmin Lee and Soogab Lee*
The Journal of Mechanical Science and Technology, vol. 25, no. 5, pp.1351-1360, 2011
A low Reynolds number dissipation rate equation model using the dissipation rate tensor equation and elliptic-blending equation
Jong-Keun Shin, Jae-Ki Byun and Young-Don Choi*
The Journal of Mechanical Science and Technology, vol. 25, no. 5, pp.1361-1371, 2011
Dynamic behavior of valve system in linear compressor based on fluid-structure interaction
Yong-sik Choi, Jun-ho Lee, Weui-bong Jeong, Il-Geun Kim
The Journal of Mechanical Science and Technology, vol. 24, no. 7, pp.1371-1377, 2010
A high resolution numerical scheme for a high speed gas-liquid two-phase flow
Byeong Rog Shin*
The Journal of Mechanical Science and Technology, vol. 25, no. 5, pp.1373-1379, 2011
Parametric study of two-phase flow by integral analysis based on power law distribution
Woo Gun Sim, N. W. Mureithi, M. J. Pettigrew
The Journal of Mechanical Science and Technology, vol. 24, no. 7, pp.1379-1387, 2010
Flow uniformity in a multi-intake pump sump model
Jong-Woong Choi, Young-Do Choi, Chang-Goo Kim, Young-Ho Lee
The Journal of Mechanical Science and Technology, vol. 24, no. 7, pp.1389-1400, 2010
Molecular dynamics study on the effect of solution-wall interaction potential on the properties of solution in uniformly charged hydrophobic channel
Hai Hoang, Sangmo Kang, Yong Kweon Suh
The Journal of Mechanical Science and Technology, vol. 24, no. 7, pp.1401-1410, 2010
Optimum channel intrusion depth for uniform flow distribution at header-channel junctions
Jun Kyoung Lee
The Journal of Mechanical Science and Technology, vol. 24, no. 7, pp.1411-1416, 2010
Viscous dissipation influencing viscosity of polymer melt in micro channels
Bin Xu, Minjie Wang, Tongmin Yu, Danyang Zhao
The Journal of Mechanical Science and Technology, vol. 24, no. 7, pp.1417-1423, 2010
Spray jet penetration and distribution of modulated liquid jets in subsonic cross-flows
In Chul Lee, Young Su Kang, Hee Jang Moon, Seok Pil Jang, Jin Kon Kim, Jaye Koo
The Journal of Mechanical Science and Technology, vol. 24, no. 7, pp.1425-1431, 2010
Effects of fluid-structure interaction on trailing-edge noise
Young J. Moon
The Journal of Mechanical Science and Technology, vol. 22, no. 7, pp.1426-1435, 2008
Passive reduction of large pressure variation for a high-speed express train in a narrow tunnel using an extra dummy tunnel duct
Su-Hwan Yun, Min-Ho Kwak, Dong-Ho Lee, Hyeok-Bin Kwon, Tae-Hwan Ko
The Journal of Mechanical Science and Technology, vol. 24, no. 7, pp.1433-1440, 2010
Numerical study on characteristics of turbulent two-phase gas-particle flow using multi-fluid model
Tae-Kuk Kim
The Journal of Mechanical Science and Technology, vol. 22, no. 7, pp.1436-1443, 2008
Flow around a freely falling square shape particle in a channel using direct-forcing fictitious domain method
Changyoung Choi, Hyun-Sik Yoon, Man-Yeong Ha
The Journal of Mechanical Science and Technology, vol. 24, no. 7, pp.1441-1449, 2010
Experimental hover performance evaluation on a small-scale rotor using a rotor test stand
Byoung-Eon Lee, Young-Seop Byun, Jeong Kim and Beom-Soo Kang*
The Journal of Mechanical Science and Technology, vol. 25, no. 6, pp.1449-1456, 2011
Fluid-particle interaction simulations of the interception of red blood cells in shear flow
Choeng Ryul Choi, Chang Nyung Kim
The Journal of Mechanical Science and Technology, vol. 24, no. 7, pp.1451-1463, 2010
An integrated blade optimization approach based on parallel ANN and GA with hierarchical fair competition dynamic-niche
Bin Zhang*, Tong Wang, Chuan-gang Gu and Xin-Wei Shu
The Journal of Mechanical Science and Technology, vol. 25, no. 6, pp.1457-1463, 2011
A numerical prediction on the reduction of microorganisms with UV disinfection
Chan Li, Baoqing Deng, Chang Nyung Kim
The Journal of Mechanical Science and Technology, vol. 24, no. 7, pp.1465-1473, 2010
A computational study on the flow characteristics of a self-compensating liquid balancer
Chung-Hyo Jung, Jin-Tak Kim and Yun-Ho Choi*
The Journal of Mechanical Science and Technology, vol. 25, no. 6, pp.1465-1474, 2011
Diagnostic flow metering using ultrasound tomography
Sejong Chun*, Byung-Ro Yoon and Kwang-Bock Lee
The Journal of Mechanical Science and Technology, vol. 25, no. 6, pp.1475-1482, 2011
Experimental investigation on dilute gas-solid multiphase jet in crossflow
Fu Yao, Wang Tong* and Gu Chuangang
The Journal of Mechanical Science and Technology, vol. 25, no. 6, pp.1483-1493, 2011
Enhancement of mixing within a micro cavity by use of transient induced-charge electro-osmotic flow around micro electrodes
Suresh Alapati, Dolfred Vijay Fernandes and Yong Kweon Suh*
The Journal of Mechanical Science and Technology, vol. 25, no. 6, pp.1495-1499, 2011
Injection profile effects on low speed axial compressor stability enhancement
Hyung-Soo Lim*, Hyo-Jo Bae, Young-Cheon Lim, Seung-Jin Song, Shin-Hyoung Kang and Soo-Seok Yang
The Journal of Mechanical Science and Technology, vol. 25, no. 6, pp.1501-1507, 2011
Spectral Element Modeling and Analysis of the Blood Flow through a Human Blood Vessel
Usik Lee
The Journal of Mechanical Science and Technology, vol. 22, no. 8, pp.1612-1619, 2008
Predicting performance of radial flow type impeller of centrifugal pump using CFD
Suthep Kaewnai
The Journal of Mechanical Science and Technology, vol. 23, no. 6, pp.1620-1627, 2009
PHASE DOPPLER MEASUREMENTS: SYSTEM SET-UP OPTIMIZATION FOR CHARACTERIZATION OF A DIESEL NOZZLE
Raul Payri
The Journal of Mechanical Science and Technology, vol. 22, no. 8, pp.1620-1632, 2008
Branching of two-phase flow from a vertical header to horizontal parallel channels
Jun Kyoung Lee
The Journal of Mechanical Science and Technology, vol. 23, no. 6, pp.1628-1636, 2009
Geometrical Effects on Spray Characteristics of Air-Pressurized Swirl Flows
Sam Goo Lee
The Journal of Mechanical Science and Technology, vol. 22, no. 8, pp.1633-1639, 2008
A characterization of the spray evolution by dual-mode phase doppler anemometry in an injector of liquid-propellant thruster
Jin Seok Kim
The Journal of Mechanical Science and Technology, vol. 23, no. 6, pp.1637-1649, 2009
Numerical Study on Performance of Supersonic Inlets with Various Three-dimensional Bumps
Sang Dug Kim
The Journal of Mechanical Science and Technology, vol. 22, no. 8, pp.1640-1647, 2008
Two -fluid nonlinear mathematical model for pulsatile blood
D. S. Sankar
The Journal of Mechanical Science and Technology, vol. 23, no. 6, pp.1650-1669, 2009
Measurements of the characteristics of spray droplets using in-line digital particle holography
Yan Yang
The Journal of Mechanical Science and Technology, vol. 23, no. 6, pp.1670-1679, 2009
Spray formation by like-doublet impinging jets in low speed cross-flows
S. S. Lee
The Journal of Mechanical Science and Technology, vol. 23, no. 6, pp.1680-1692, 2009
Effect of wave conditions on the performance and internal flow of a direct drive turbine
Young-Do Choi
The Journal of Mechanical Science and Technology, vol. 23, no. 6, pp.1693-1701, 2009
Numerical analysis of the subsonic flow around a three-dimensional cavity
Hong-il Choi
The Journal of Mechanical Science and Technology, vol. 23, no. 6, pp.1702-1709, 2009
Numerical solutions for unsteady flow past a semi-infinite inclined plate with temperature oscillations
G.Palani
The Journal of Mechanical Science and Technology, vol. 23, no. 6, pp.1710-1717, 2009
Determination of rheological properties of whole blood with a scanning capillary-tube rheometer using constitutive models
Sangho Kim
The Journal of Mechanical Science and Technology, vol. 23, no. 6, pp.1718-1726, 2009
Aerodynamic analysis of flapping foils using volume grid deformation code
Jin Hwan Ko
The Journal of Mechanical Science and Technology, vol. 23, no. 6, pp.1727-1735, 2009
A study on the flow with nonequilibrium condensation in a minimum length nozzle
Soon-Bum Kwon
The Journal of Mechanical Science and Technology, vol. 23, no. 6, pp.1736-1742, 2009
Analysis of flame shapes in turbulent hydrogen jet flames with coaxial air
Hee-Jang Moon
The Journal of Mechanical Science and Technology, vol. 23, no. 6, pp.1743-1750, 2009
Numerical simulation of fluid-structure interaction in a stirred vessel equipped with an anchor impeller
Sarhan Karray*, Zied Driss, Hedi Kchaou and Mohamed Salah Abid
The Journal of Mechanical Science and Technology, vol. 25, no. 7, pp.1749-1760, 2011
NOx emission characteristics in turbulent hydrogen jet flames with coaxial air
Hee-Jang Moon
The Journal of Mechanical Science and Technology, vol. 23, no. 6, pp.1751-1759, 2009
A relative assessment of sub grid scale models for large eddy simulation of co-axial combustor
Rupesh D. Shah, Hanumanthappa Patil and Jyotirmay Banerjee*
The Journal of Mechanical Science and Technology, vol. 26, no. 6, pp.1753-1763, 2012
Effect of nozzle geometry for swirl type twin-fluid water mist nozzle on the spray characteristic
Soon Hyun Yoon*, Do Yeon Kim, Dong Keon Kim and Bong Hwan Kim
The Journal of Mechanical Science and Technology, vol. 25, no. 7, pp.1761-1766, 2011
Experimental and theoretical investigation on the sealing performance of the combined seals for reciprocating rod
Jianfeng Mao, Weizhe Wang* and Yingzheng Liu
The Journal of Mechanical Science and Technology, vol. 26, no. 6, pp.1765-1772, 2012
Wind pressure distribution on canopies attached to tall buildings
Hyung-Woon Roh and Ha-Rim Kim*
The Journal of Mechanical Science and Technology, vol. 25, no. 7, pp.1767-1774, 2011
Suppression of flow-induced vibration of a circular cylinder by means of a flexible sheet
Sangil Kim and Seung-Chul Lee*
The Journal of Mechanical Science and Technology, vol. 26, no. 6, pp.1773-1779, 2012
Atomization characteristics of emulsified fuel oil by instant emulsification
Wonho Kim, Taeu Yu, and Woongsup Yoon*
The Journal of Mechanical Science and Technology, vol. 26, no. 6, pp.1781-1791, 2012
High-efficiency design of a tunnel ventilation jet fan through numerical optimization techniques
Joon-Hyung Kim, Jin-Hyuk Kim, Kwang-Yong Kim, Joon-Yong Yoon, Sang-Ho Yang and Young-Seok Choi*
The Journal of Mechanical Science and Technology, vol. 26, no. 6, pp.1793-1800, 2012
One-pitch passage designed inversely with a single blade for cascade experiments
Chong-Hyun Cho, Kook-Young Ahn, Young-Cheol Kim, Soo-Yong Cho
The Journal of Mechanical Science and Technology, vol. 24, no. 9, pp.1799-1807, 2010
Numerical investigation of an axi-symmetric laminar jet impinging on a dimpled surface under uniform heat flux using a finite element method
Koonlaya Kanokjaruvijit, Chakkraphan Thawonngamyingsakul, Somchai Wongwises
The Journal of Mechanical Science and Technology, vol. 24, no. 9, pp.1809-1818, 2010
Spatial and temporal structures of turbulent bubble-driven flows in a rectangular water tank
Seung Jae Yi, Sang Moon Kim, Hyun Dong Kim, Jong Wook Kim, Kyung Chun Kim
The Journal of Mechanical Science and Technology, vol. 24, no. 9, pp.1819-1827, 2010
Investigation on hydrodynamics and mass transfer characteristics of a gas-liquid ejector using three-dimensional CFD modeling
Hanshik Chung
The Journal of Mechanical Science and Technology, vol. 22, no. 9, pp.1821-1829, 2008
Predicting the impact of vegetations in open channels with different distributaries’ operations on water surface profile using artificial neural networks
Mostafa A. M. Abdeen
The Journal of Mechanical Science and Technology, vol. 22, no. 9, pp.1830-1842, 2008
A dynamic model and numerical study on the liquid balancer used in an automatic washing machine
Chung-Hyo Jung
The Journal of Mechanical Science and Technology, vol. 22, no. 9, pp.1843-1852, 2008
Influence of different bell-shaped stenoses on the progression of the disease, atherosclerosis
D. K. Mandal*, N. K. Manna and S. Chakrabarti
The Journal of Mechanical Science and Technology, vol. 25, no. 8, pp.1933-1947, 2011
Three-dimensional flow characteristics of propeller-propulsion WIG effect vehicle with direct underside pressurization
Juhee Lee, Byung Moon Kim and Kyoungwoo Park*
The Journal of Mechanical Science and Technology, vol. 25, no. 8, pp.1949-1960, 2011
A comparative study of flow rate characteristics of an averaging Pitot tube type flow meter according to H parameters based on two kinds of differential pressure
Dae-San Oh and Choong-Hoon Lee*
The Journal of Mechanical Science and Technology, vol. 25, no. 8, pp.1961-1967, 2011
An experimental study on characteristics of two-phase flows in vertical pipe
Woo Gun Sim, B. M. Bae and N. W. Mureithi
The Journal of Mechanical Science and Technology, vol. 24, no. 10, pp.1981-1988, 2010
A new scheme developed for the numerical simulation of the Boltzmann equation using the direct simulation monte-carlo scheme for the flow about a sphere
S. S. Nourazar and A. A. Ganjaei
The Journal of Mechanical Science and Technology, vol. 24, no. 10, pp.1989-1996, 2010
Numerical and experimental investigation of vortex breaker effectiveness on the improvement in launch vehicle ballistic parameters
Mahdi N. Mahyari, Hasan Karimi, Hasan Naseh and Mehran Mirshams
The Journal of Mechanical Science and Technology, vol. 24, no. 10, pp.1997-2006, 2010
The cavitation behavior with short length blades in centrifugal pump
Quangnha Thai and Changjin Lee
The Journal of Mechanical Science and Technology, vol. 24, no. 10, pp.2007-2016, 2010
Application of wind data from automated weather stations to wind resources estimation in Korea
Yoonseok Hwang, Insu Paek, Kwangyong Yoon, Wonseon Lee, Neungsoo Yoo and Yoonsu Nam
The Journal of Mechanical Science and Technology, vol. 24, no. 10, pp.2017-2023, 2010
Investigating flow patterns in a channel with complex obstacles using the lattice Boltzmann method
Jiraporn Yojina, Waipot Ngamsaad, Narin Nuttavut, Darapond Triampo, Yongwimon Lenbury, Paisan Kanthang, Somchai Sriyab and Wannapong Triampo
The Journal of Mechanical Science and Technology, vol. 24, no. 10, pp.2025-2034, 2010
Performance assessment limits in transonic 3D turbine stage blade rows using a mixing-plane approach
José C. Páscoa, Carlos Xisto and Emil Göttlich
The Journal of Mechanical Science and Technology, vol. 24, no. 10, pp.2035-2042, 2010
Experimental studies on the flow characteristics in an oscillating water column device
Krishnil Ram, Mohammed Faizal, M. Rafiuddin Ahmed and Young-Ho Lee
The Journal of Mechanical Science and Technology, vol. 24, no. 10, pp.2043-2050, 2010
Heat-transfer analysis of indirect moxibustion using unsteady conjugate heat-transfer solutions
Byoung Jin Jeon and Hyoung Gwon Choi*
The Journal of Mechanical Science and Technology, vol. 24, no. 10, pp.2051-2057, 2010
Performance enhancement of axial fan blade through multi-objective optimization techniques
Jin-Hyuk Kim, Jae-Ho Choi, Afzal Husain and Kwang-Yong Kim*
The Journal of Mechanical Science and Technology, vol. 24, no. 10, pp.2059-2066, 2010
A performance study on a direct drive hydro turbine for wave energy converter
Young-Do Choi, Chang-Goo Kim, You-Taek Kim, Jung-Il Song, Young-Ho Lee*
The Journal of Mechanical Science and Technology, vol. 24, no. 11, pp.2197-2206, 2010
A numerical study on electrohydrodynamic induction pumps using CFD modeling
Byoung Seo Lee, Joon Sik Lee*
The Journal of Mechanical Science and Technology, vol. 24, no. 11, pp.2207-2214, 2010
Numerical study on spatial distribution of silver nanoparticles inside whole-body type inhalation toxicity chamber
Jae Ho Cho, Atul Kulkarni, Hojoong Kim, Jin Uk Yoon, Jae Hyuck Sung, Il Je Yu, Taesung Kim*
The Journal of Mechanical Science and Technology, vol. 24, no. 11, pp.2215-2220, 2010
Turbulent heat transfer characteristics in compound channels with gap
Seong-Ho Hong, Jeong-Sik Seo, Jae-Ki Byun, Young-Don Choi* and Jong-Keun Shin
The Journal of Mechanical Science and Technology, vol. 25, no. 9, pp.2217-2225, 2011
Large eddy simulation of turbulent premixed combustion flow around bluff body
Nam Seob Park and Sang Cheol Ko*
The Journal of Mechanical Science and Technology, vol. 25, no. 9, pp.2227-2235, 2011
A general structural design methodology for multi-hole orifices and its experimental application
Tianyi Zhao*, Jili Zhang and Liangdong Ma
The Journal of Mechanical Science and Technology, vol. 25, no. 9, pp.2237-2246, 2011
Effect of nonlinearity on the Taylor-Couette flow in the narrow-gap
Nariman Ashrafi*
The Journal of Mechanical Science and Technology, vol. 25, no. 9, pp.2247-2257, 2011
Experimental investigation on viscoplastic parameters of conditioned sands in earth pressure balance shield tunneling
Qinglin Meng*, Fuzheng Qu and Shouju Li
The Journal of Mechanical Science and Technology, vol. 25, no. 9, pp.2259-2266, 2011
Effects of bell mouth geometries on the flow rate of centrifugal blowers
Pham Ngoc Son*, Jaewon Kim and E. Y. Ahn
The Journal of Mechanical Science and Technology, vol. 25, no. 9, pp.2267-2276, 2011
Optimization the design of venturi gas mixer for syngas engine using three-dimensional CFD modeling
Dominicus Danardono1, Ki-Seong Kim1,*, Sun-Youp Lee2 and Jang-Hee Lee2
The Journal of Mechanical Science and Technology, vol. 25, no. 9, pp.2285-2296, 2011
Unsteady viscous flows past blunt bodies at moderate Reynolds numbers
Moon-Sang Kim
The Journal of Mechanical Science and Technology, vol. 22, no. 11, pp.2286-2298, 2008
Selection of pneumatic control valves from catalogues
Tomasz Kiczkowiak
The Journal of Mechanical Science and Technology, vol. 23, no. 9, pp.2345-2349, 2009
Experiments on cavitation instability of a two-bladed turbopump inducer
Kyoung-Hoon Lee/Joo-Hyung Yoo/Shin-Hyoung Kang
The Journal of Mechanical Science and Technology, vol. 23, no. 9, pp.2350-2356, 2009
Simultaneous measurement of particle and fluid velocities in particle-laden flows
D. X. Jin/D.-Y. Lee
The Journal of Mechanical Science and Technology, vol. 23, no. 9, pp.2357-2365, 2009
CFD analysis of flow phenomena inside thermo vapor compressor influenced by operating conditions and converging duct angles
Hyomin Jeong/Tony Utomo/M. Ji/Y. Lee/G. Lee
The Journal of Mechanical Science and Technology, vol. 23, no. 9, pp.2366-2375, 2009
Reverse flow in a square duct with an obstruction at the entry
Chang-Hyun Sohn/B. H. Lakshmana Gowda/Myong-Gun Ju
The Journal of Mechanical Science and Technology, vol. 23, no. 9, pp.2376-2389, 2009
Influence of corner radius on the near wake structure of a transversely
R. Ajith Kumar/Chang Hyun Sohn/B. H. Lakshmana Gowda
The Journal of Mechanical Science and Technology, vol. 23, no. 9, pp.2390-2416, 2009
Novel analytical model for predicting the combustion characteristics of premixed flame propagation in lycopodium dust particles
Mehdi Bidabadi/Alireza Rahbari
The Journal of Mechanical Science and Technology, vol. 23, no. 9, pp.2417-2423, 2009
Effects of surface geometry and non-newtonian viscosity on the flow field in arterial stenoses
W. W. Jeong/K. Rhee
The Journal of Mechanical Science and Technology, vol. 23, no. 9, pp.2424-2433, 2009
Simulation of droplet impact on a solid surface using the level contour reconstruction method
Seungwon Shin/Damir Juric
The Journal of Mechanical Science and Technology, vol. 23, no. 9, pp.2434-2443, 2009
The influence of negative work on optimal flapping flight
Christopher O. Johnston, William H. Mason and Cheolheui Han*
The Journal of Mechanical Science and Technology, vol. 24, no. 12, pp.2441-2449, 2010
Two-fluid non-Newtonian models for blood flow in catheterized arteries - A comparative study
D. S. Sankar/Usik Lee
The Journal of Mechanical Science and Technology, vol. 23, no. 9, pp.2444-2455, 2009
Unsteady thin airfoil theory revisited for a general deforming airfoil
Christopher O. Johnston, William H. Mason, Cheolheui Han*
The Journal of Mechanical Science and Technology, vol. 24, no. 12, pp.2451-2460, 2010
Pulsatile flow of viscous and viscoelastic fluids in constricted tubes
A. Javadzadegan/M. Esmaeili/S. Majidi
The Journal of Mechanical Science and Technology, vol. 23, no. 9, pp.2456-2467, 2009
Vibrational characteristics of sphere model installed in wind tunnel test section
Young Il Jang, Sang Joon Lee*
The Journal of Mechanical Science and Technology, vol. 24, no. 12, pp.2461-2465, 2010
Numerical estimation of ion transport and electroosmotic flow around a pair of cylindrical electrodes in a microchannel using immersed boundary method
Dolfred Vijay Fernandes, Sangmo Kang, Yong Kweon Suh*
The Journal of Mechanical Science and Technology, vol. 24, no. 12, pp.2467-2477, 2010
Design and performance characteristic analysis of servo valve-type water hydraulic poppet valve
Sung-Hwan Park
The Journal of Mechanical Science and Technology, vol. 23, no. 9, pp.2468-2478, 2009
Modelling the flow conditions in the tunnel and its reduced model
Mária Čarnogurská*, Miroslav Příhoda, Daniela Popčáková
The Journal of Mechanical Science and Technology, vol. 24, no. 12, pp.2479-2486, 2010
Constrained and non-constrained aerodynamic optimization using the adjoint equations approach
Mohamad Hamed Hekmat/Masoud Mirzaei/Ehsan Izadpanah
The Journal of Mechanical Science and Technology, vol. 23, no. 9, pp.2479-2491, 2009
Numerical simulation of flows around axisymmetric inlet with bleed regions
Einkeun Kwak, Hyungro Lee, Seungsoo Lee*
The Journal of Mechanical Science and Technology, vol. 24, no. 12, pp.2487-2495, 2010
Parallel computation of two-phase flow in a microchannel using the lattice Boltzmann method
Suresh Alapati/Sangmo Kang/Yong Kweon Suh
The Journal of Mechanical Science and Technology, vol. 23, no. 9, pp.2492-2501, 2009
Boundary treatment for the unsteady surface velocity in an immersed boundary method
Seung Jeon/Haecheon Choi
The Journal of Mechanical Science and Technology, vol. 23, no. 9, pp.2502-2506, 2009
Hydraulic transport of sand-water mixtures in pipelines Part I. Experiment
Changhee Kim
The Journal of Mechanical Science and Technology, vol. 22, no. 12, pp.2534-2541, 2008
Numerical simulation of fluid-structure interaction of a moving flexible foil
Sangmook Shin
The Journal of Mechanical Science and Technology, vol. 22, no. 12, pp.2542-2553, 2008
Free surface transition and momentum augmentation of liquid flow in Micro/Nano-scale channels with hydrophobic and hydrophilic surfaces
Budiono
The Journal of Mechanical Science and Technology, vol. 22, no. 12, pp.2554-2562, 2008
Experimental study on hysteresis phenomena of shock wave structure in an over-expanded axisymmetric jet
Shigeru Matsuo*, Toshiaki Setoguchi, Junji Nagao, Miah Md. Ashraful Alam and Heuy Dong Kim
The Journal of Mechanical Science and Technology, vol. 25, no. 10, pp.2559-2565, 2011
Turbulent heat transfer of supercritical carbon dioxide in square cross-sectional duct flow
Seong Ho Han
The Journal of Mechanical Science and Technology, vol. 22, no. 12, pp.2563-2577, 2008
A numerical analysis of drop impact on liquid film by using a level set method
Sang Hyuk Lee, Nahmkeon Hur* and Seongwon Kang
The Journal of Mechanical Science and Technology, vol. 25, no. 10, pp.2567-2572, 2011
FDM analysis for MHD flow of a non-Newtonian fluid for blood flow in stenosed arteries
D. S. Sankar and Usik Lee*
The Journal of Mechanical Science and Technology, vol. 25, no. 10, pp.2573-2581, 2011
Influence of endplate on aerodynamic characteristics of low-aspect-ratio wing in ground effect
Kyoungwoo Park
The Journal of Mechanical Science and Technology, vol. 22, no. 12, pp.2578-2589, 2008
Investigation on complete characteristics and hydraulic transient of centrifugal pump
Wuyi Wan* and Wenrui Huang
The Journal of Mechanical Science and Technology, vol. 25, no. 10, pp.2583-2590, 2011
Numerical study of droplet motion in a microchannel with different contact angles
Jiyoung Choi
The Journal of Mechanical Science and Technology, vol. 22, no. 12, pp.2590-2599, 2008
2D planar jet control for manipulating the separation bubble behind the vertical fence
In-Su Kang, Hee-Taek Chung, Jae-Eun Cha and Hyoung-Bum Kim*
The Journal of Mechanical Science and Technology, vol. 25, no. 10, pp.2591-2599, 2011
Analysis and attenuation of impulsive sound pressure in large caliber weapon during muzzle blast
Hafizur Rehman, Seung Hwa Hwang, Berkah Fajar, Hanshik Chung and Hyomin Jeong*
The Journal of Mechanical Science and Technology, vol. 25, no. 10, pp.2601-2606, 2011
Slip flow over micron-sized spherical particles at intermediate Reynolds numbers
Hamid Niazmand and Morteza Anbarsooz*
The Journal of Mechanical Science and Technology, vol. 26, no. 9, pp.2741-2749, 2012
A study on the exit flow characteristics determined by the orifice configuration of multi-perforated tubes
Sangkyoo Lee, Namsoo Moon and Jeekeun Lee*
The Journal of Mechanical Science and Technology, vol. 26, no. 9, pp.2751-2758, 2012
Experimental study of optimum filter system design of high purity polymer thread machine
Kyung Jin Ryu, Dong Joo Song* and Dong Jin Kang
The Journal of Mechanical Science and Technology, vol. 26, no. 9, pp.2759-2764, 2012
Stereoscopic-PIV measurement of turbulent jets issuing from a sharp-edged circular nozzle with multiple triangular tabs
Sang-Joon Lee*, Young-Gil Jang and Yong-Seok Choi
The Journal of Mechanical Science and Technology, vol. 26, no. 9, pp.2765-2771, 2012
An experimental and numerical study on hydrodynamic characteristicsof horizontal annular type water-air ejector
Yoon Kee Kim, Dong Yeop Lee, Hyun Dong Kim, Joo Ha Ahn and Kyung Chun Kim*
The Journal of Mechanical Science and Technology, vol. 26, no. 9, pp.2773-2781, 2012
A suggestion of a new method for the calculation of the coating thickness in continuous hot-dip galvanizing
C. M. Jo, G. Y. Kim, Y. D. Kwon and S. B. Kwon*
The Journal of Mechanical Science and Technology, vol. 25, no. 11, pp.2781-2786, 2011
Calculation of water droplet impingement using the coupled method of rigid body dynamics and the moving particle semi-implicit method
Shane Park and Gyoodong Jeun*
The Journal of Mechanical Science and Technology, vol. 25, no. 11, pp.2787-2794, 2011
Gap-flow patterns behind twin-cylinders at low Reynolds number
Shun Chang Yen* and Chien Ting Liu
The Journal of Mechanical Science and Technology, vol. 25, no. 11, pp.2795-2803, 2011
Numerical simulation of a binary gas flow inside a rotating cylinder
A. A. Ganjaei, S. S. Nourazar
The Journal of Mechanical Science and Technology, vol. 23, no. 10, pp.2848-2860, 2009
A new algorithm for the simulation of the boltzmann equation using the direct simulation monte-carlo method
A. A. Ganjaei, S. S. Nourazar
The Journal of Mechanical Science and Technology, vol. 23, no. 10, pp.2861-2870, 2009
Effect of a blind spot in a dielectrophoretic field on the separation of human breast cancer cells (MCF 7)
Youngho Kim/Jangwon Lee/Jaemin An/Sang Ho Lee/Byungkyu Kim
The Journal of Mechanical Science and Technology, vol. 23, no. 11, pp.3132-3139, 2009
Rotor profile design in a hypogerotor pump
Soon-Man Kwon/Han Sung Kang/Joong-Ho Shin
The Journal of Mechanical Science and Technology, vol. 23, no. 12, pp.3459-3470, 2009
Numerical analysis for the coating thickness prediction in continuous hot-dip galvanizing
Soon-Bum Kwon/Young-Doo Kwon/Sung-Jin Lee/Seung-Young Shin/Geun-Young Kim
The Journal of Mechanical Science and Technology, vol. 23, no. 12, pp.3471-3478, 2009
Three-dimensional instability in compressible reacting mixing layers with heat release
Dongshin Shin/Heejung Hong
The Journal of Mechanical Science and Technology, vol. 23, no. 12, pp.3479-3484, 2009
 
 
 
JMST Editorial Office: 1556, 301 Bldg., Mechanical and Aerospace Engineering,
Seoul National University, San 56-1 Shinlim-Dong, Kwanak-Ku, Seoul 151-744, Korea
TEL: +82-70-4063-1600, E-mail: editorial@j-mst.org
JMST Production Office: Room 702, KSTC New Building, 635-4, Yeogsam-dong, Gangnam-gu, Seoul 135-703, Korea
TEL: +82-2-501-6056, FAX: +82-2-501-3649, E-mail: editorial@ksme.or.kr