| |
|
|
|
|
|
|
| |
|
| |
 |
|
| |
|
|
| |
| Categories |
|
|
| Dynamics, Vibration, and Control |
|
Eigenvalue problems of rotor system with uncertain parameters
Bao-Guo Liu*
The Journal of Mechanical Science and Technology, vol. 26, no. 1, pp.1-10, 2012 |
|
|
Development of free vibration analysis algorithm for beam structures by combining Sylvester’s inertia theorem and transfer stiffness coefficient method
Myung-Soo Choi*, Takahiro Kondou and Yasuhiro Bonkobara
The Journal of Mechanical Science and Technology, vol. 26, no. 1, pp.11-19, 2012 |
|
|
Study on durability and reliability of strut type suspension noise based on experimental methods
Gugyong Kim, Sungsu Kang*, Yongjun Lee, Sooncheol Park and Wonwook Jung
The Journal of Mechanical Science and Technology, vol. 26, no. 1, pp.21-29, 2012 |
|
|
Development of multiple performance indices and system parameter study for the design of a MEMS accelerometer
Yong Il Kim, Chan Kyu Choi and Hong Hee Yoo*
The Journal of Mechanical Science and Technology, vol. 26, no. 1, pp.31-37, 2012 |
|
|
Uncertainty analysis of nonlinear systems employing the first-order reliability method
Chan Kyu Choi and Hong Hee Yoo*
The Journal of Mechanical Science and Technology, vol. 26, no. 1, pp.39-44, 2012 |
|
|
Synchronization of two non-identical coupled exciters in a non-resonant vibrating system of plane motion
Chunyu Zhao*, Qinghua Zhao, Yimin Zhang, Bangchun Wen1
The Journal of Mechanical Science and Technology, vol. 25, no. 1, pp.49-60, 2011 |
|
|
Comparison of collocation strategies of sensor and actuator for vibration control
Young-Sup Lee
The Journal of Mechanical Science and Technology, vol. 25, no. 1, pp.61-68, 2011 |
|
|
Free and forced vibration analysis of FG beam considering temperature dependency of material properties
Mohammad Azadi
The Journal of Mechanical Science and Technology, vol. 25, no. 1, pp.69-80, 2011 |
|
|
Local stiffness control for reducing vehicle interior noise by using FRF-based synthesis method
Kyu-Sik Kim, Yeon June Kang*
The Journal of Mechanical Science and Technology, vol. 25, no. 1, pp.81-88, 2011 |
|
|
Aerodynamic response analysis of wind turbines
Jing Li, Jianyun Chen, Xiaobo Chen*
The Journal of Mechanical Science and Technology, vol. 25, no. 1, pp.89-95, 2011 |
|
|
Dynamic modeling and simulation of electrodynamic tether system in stationkeeping phase
Xu Dafu*, Kong Xianren, Liao Jun, Yang Zhengxian and Wang Feng
The Journal of Mechanical Science and Technology, vol. 25, no. 1, pp.97-102, 2011 |
|
|
Diagnosis of mechanical pumping system using neural networks and system parameters analysis
Tai-Ming Tsai
The Journal of Mechanical Science and Technology, vol. 23, no. 1, pp.124-135, 2009 |
|
|
Second order hold and taylor series based discretization of SISO input time-delay systems
Kil To Chong
The Journal of Mechanical Science and Technology, vol. 23, no. 1, pp.136-148, 2009 |
|
|
Trajectory control of electro-hydraulic excavator using fuzzy self tuning algorithm with neural network
Kyoung Kwan AHN
The Journal of Mechanical Science and Technology, vol. 23, no. 1, pp.149-160, 2009 |
|
|
The comparison of joint kinematic error using the absolute and relative coordinate systems for human gait
Joung Hwan Mun
The Journal of Mechanical Science and Technology, vol. 23, no. 1, pp.161-169, 2009 |
|
|
Effect of partial rotor-to-stator rub on shaft vibration
Mohamed E. Eleshaky
The Journal of Mechanical Science and Technology, vol. 23, no. 1, pp.170-182, 2009 |
|
|
A novel optimal assembly algorithm for haptic interface applications of a virtual maintenance system
Jungwon Yoon
The Journal of Mechanical Science and Technology, vol. 23, no. 1, pp.183-194, 2009 |
|
|
A new macro-micro dual drive parallel robot for chromosome dissection
Jin Feng, Feng Gao*, Xianchao Zhao, Yi Yue and Renqiang Liu
The Journal of Mechanical Science and Technology, vol. 26, no. 1, pp.187-194, 2012 |
|
|
Transfer alignment considering measurement time delay and ship body flexure
Lyou Joon
The Journal of Mechanical Science and Technology, vol. 23, no. 1, pp.195-203, 2009 |
|
|
Modeling of a hydraulic excavator based on bond graph method and its parameter estimation
Soo-Jin Lee* and Pyung-Hun Chang
The Journal of Mechanical Science and Technology, vol. 26, no. 1, pp.195-204, 2012 |
|
|
Kinematics, kinetics and muscle activities of the lower extremity during the first four steps from gait initiation to the steady-state walking
Youngho Kim
The Journal of Mechanical Science and Technology, vol. 23, no. 1, pp.204-211, 2009 |
|
|
Adaptive feedforward control of ionic polymer metal composites with disturbance cancellation
Seonhyeok Kang, Woojin Kim, H. Jin Kim* and Jaegyun Park*
The Journal of Mechanical Science and Technology, vol. 26, no. 1, pp.205-212, 2012 |
|
|
A study on the tension estimator by using register error in a printing section of roll to roll e-printing systems
Keehyun Shin
The Journal of Mechanical Science and Technology, vol. 23, no. 1, pp.212-220, 2009 |
|
|
Design of a robust controller for rollover prevention with active suspension and differential braking
Seongjin Yim*
The Journal of Mechanical Science and Technology, vol. 26, no. 1, pp.213-222, 2012 |
|
|
Free vibration analysis of spherical caps by the pseudospectral method
Jinhee Lee
The Journal of Mechanical Science and Technology, vol. 23, no. 1, pp.221-228, 2009 |
|
|
Robust control application for a three-axis road simulator
J.W. Kim, D.J. Xuan, Y.-B. Kim*
The Journal of Mechanical Science and Technology, vol. 25, no. 1, pp.221-231, 2011 |
|
|
Modeling of a hydraulic engine mount for active pneumatic engine vibration control using the extended Kalman filter
Keum-Shik Hong
The Journal of Mechanical Science and Technology, vol. 23, no. 1, pp.229-236, 2009 |
|
|
On the stability of receding horizon control based onhorizon size for linear discrete systems
Myung-Hwan Oh*, Jun-Ho Oh
The Journal of Mechanical Science and Technology, vol. 25, no. 1, pp.233-238, 2011 |
|
|
Driving an AMB system using a 2D space vector modulation of three-leg voltage source converters
Hyeong-Joon Ahn*, Se-Na Jeong
The Journal of Mechanical Science and Technology, vol. 25, no. 1, pp.239-246, 2011 |
|
|
Self-learning navigation algorithm for vision-based mobile robots using machine learning algorithms
Jeong-Min Choi, Sang-Jin Lee, Mooncheol Won*
The Journal of Mechanical Science and Technology, vol. 25, no. 1, pp.247-254, 2011 |
|
|
Derivation and isomorphism identification of valid topological graphsfor 1-, 2-DOF planar closed mechanisms by characteristic strings
Yi Lu*, Bingyi Mao, Jianping Yu
The Journal of Mechanical Science and Technology, vol. 25, no. 1, pp.255-263, 2011 |
|
|
Gear fault identification and classification of singular value decomposition based on Hilbert-Huang transform
Zhongyuan Su*, Yaoming Zhang, Minping Jia, Feiyun Xu, Jianzhong Hu
The Journal of Mechanical Science and Technology, vol. 25, no. 2, pp.267-272, 2011 |
|
|
Effect of the number of poles on the acoustic noise from BLDC motors
Kwang-Suk Kim, Chang-Min Lee, Gun-Yong Hwang, Sang-Moon Hwang*
The Journal of Mechanical Science and Technology, vol. 25, no. 2, pp.273-277, 2011 |
|
|
Application of impulse damper in control of a chaotic friction-induced vibration
Mansour Ataei, Ali Asghar Atai*, Sajjad Mirjavadi, Mohammad Sahebnasagh, Mansour Nikkhah-Bahrami
The Journal of Mechanical Science and Technology, vol. 25, no. 2, pp.279-285, 2011 |
|
|
Hybrid experimental/numerical technique for determination of the complex dynamic moduli of elastic porous materials
Amir Hamza
The Journal of Mechanical Science and Technology, vol. 23, no. 2, pp.283-290, 2009 |
|
|
Investigation on dynamic behavior of railway track in transition zone
Jabbar-Ali Zakeri*, Vida Ghorbani
The Journal of Mechanical Science and Technology, vol. 25, no. 2, pp.287-292, 2011 |
|
|
Hilbert-Huang transform and marginal spectrum for detection and diagnosis of localized defects in roller bearings
Hui Li
The Journal of Mechanical Science and Technology, vol. 23, no. 2, pp.291-301, 2009 |
|
|
Multibody approach to dynamic analysis of driver-interactive seatbelt system with motorized retractor
Sugil Choi, Taeoh Tak*
The Journal of Mechanical Science and Technology, vol. 25, no. 2, pp.293-299, 2011 |
|
|
Spectral kurtosis based on AR model for fault diagnosis and condition monitoring of rolling bearing
Feiyun Cong*, Jin Chen and Guangming Dong
The Journal of Mechanical Science and Technology, vol. 26, no. 2, pp.301-306, 2012 |
|
|
Fault detection and isolation of DURUMI-II using similarity measure
WookJe Park
The Journal of Mechanical Science and Technology, vol. 23, no. 2, pp.302-310, 2009 |
|
|
Effects of camber angle control of front suspension on vehicle dynamic behaviors
Seong-Jun Park and Jeong-Hyun Sohn*
The Journal of Mechanical Science and Technology, vol. 26, no. 2, pp.307-313, 2012 |
|
|
Tunnel ventilation control via an actor-critic algorithm employing nonparametric policy gradients
Baeksuk Chu
The Journal of Mechanical Science and Technology, vol. 23, no. 2, pp.311-323, 2009 |
|
|
Nonlinear impact model of a tennis racket and a ball
Seongyeong Yang*, Apostolos Fafitis and Avi Wiezel
The Journal of Mechanical Science and Technology, vol. 26, no. 2, pp.315-321, 2012 |
|
|
Intelligent semi-active vibration control of eleven degrees of freedom suspension system using magnetorheological dampers
Seiyed Hamid Zareh*, Atabak Sarrafan, Amir Ali Akbar Khayyat and Abolghassem Zabihollah
The Journal of Mechanical Science and Technology, vol. 26, no. 2, pp.323-334, 2012 |
|
|
Development of a new training system for improving the postural control ability of elderly adults
Yong-Jun Piao
The Journal of Mechanical Science and Technology, vol. 23, no. 2, pp.324-334, 2009 |
|
|
Theoretical analysis and experiments of axial flux pm motors with minimized cogging torque
Dong Ho Kim
The Journal of Mechanical Science and Technology, vol. 23, no. 2, pp.335-343, 2009 |
|
|
A method for vibration isolation of a vertical axis automatic washing machine with a hydraulic balancer
Hai-Wei Chen, Wei-Xi Ji*, Qiu-Ju Zhang,Yi Cao and Sheng-Yao Fan
The Journal of Mechanical Science and Technology, vol. 26, no. 2, pp.335-343, 2012 |
|
|
Design and control of a new linear magnetic actuator for squeeze film damper
Truong Quoc Thanh
The Journal of Mechanical Science and Technology, vol. 23, no. 2, pp.344-357, 2009 |
|
|
Vibration of two cantilever beams clamped at one end and connected by a rigid body at the other
Kyung Taek Lee
The Journal of Mechanical Science and Technology, vol. 23, no. 2, pp.358-371, 2009 |
|
|
Applications of fiber models based on discrete element method to string vibration
Junyoung Park
The Journal of Mechanical Science and Technology, vol. 23, no. 2, pp.372-380, 2009 |
|
|
Predictive navigation of an autonomous vehicle with nonholonomic and minimum turning radius constraints
Augie Widyotriatmo
The Journal of Mechanical Science and Technology, vol. 23, no. 2, pp.381-388, 2009 |
|
|
Development of dynamic response analysis algorithm for beam structures using transfer of mass coefficient
M. S. Choi
The Journal of Mechanical Science and Technology, vol. 23, no. 2, pp.389-400, 2009 |
|
|
Effects of windowing filters in leak locating for buried water-filled cast iron pipes
Young-Sup Lee
The Journal of Mechanical Science and Technology, vol. 23, no. 2, pp.401-408, 2009 |
|
|
Seismic random vibration analysis of shear beams with random structural parameters
Jun Dai/Wei Gao/Nong Zhang/Nengguang Liu
The Journal of Mechanical Science and Technology, vol. 24, no. 2, pp.497-504, 2010 |
|
|
Effect of a viscous fluid at the end face on the torsional vibration of a rod
Jin Oh Kim/Han Yong Chun
The Journal of Mechanical Science and Technology, vol. 24, no. 2, pp.505-512, 2010 |
|
|
Robust stabilization of a wheeled vehicle: Hybrid feedback control design and experimental validation
Augie Widyotriatmo/Keum-Shik Hong/Lafin H. Prayudhi
The Journal of Mechanical Science and Technology, vol. 24, no. 2, pp.513-520, 2010 |
|
|
Singularity kinematics principle and position-singularity analyses of the 6-3 Stewart-Gough parallel manipulators
Yi Cao, Hui Zhou*, Long Shen, Baokun Li
The Journal of Mechanical Science and Technology, vol. 25, no. 2, pp.513-522, 2011 |
|
|
Verification of intelligent control of a launch vehicle with HILS
M. Rezaei Darestani1,*, M. Zareh1, J.Roshanian1 and A. Khaki Sedigh2
The Journal of Mechanical Science and Technology, vol. 25, no. 2, pp.523-536, 2011 |
|
|
Study of a simulator database and an experiment for the evaluation of highway driving safety
Baeyoung Kim, ChoongMin Jeong, Myungwon Suh*
The Journal of Mechanical Science and Technology, vol. 25, no. 2, pp.537-542, 2011 |
|
|
Fabrication of four-point biped robot foot module based on contact-resistance force sensor and its evaluation
Hyun-Joon Kwon, Jong-Ho Kim*, Dong-Ki Kim, Young-Ha Kwon
The Journal of Mechanical Science and Technology, vol. 25, no. 2, pp.543-548, 2011 |
|
|
On the derivative constraints of input shaping control
Chul-Goo Kang*
The Journal of Mechanical Science and Technology, vol. 25, no. 2, pp.549-554, 2011 |
|
|
homotopy perturbation analysis of nonlinear free vibration of Timoshenko microbeams
Hamid Moeenfard, Mahdi Mojahedi, Mohammad Taghi Ahmadian*
The Journal of Mechanical Science and Technology, vol. 25, no. 3, pp.557-565, 2011 |
|
|
Vibrational energy flow analysis of penetration beam-plate coupled structures
J.-H. Song, S.-Y. Hong, Y. Kang*, H.-G. Kil
The Journal of Mechanical Science and Technology, vol. 25, no. 3, pp.567-576, 2011 |
|
|
Whole-body vibration analysis for assessment of railway vehicle ride quality
Ju Seok Kang, Yeon-Sun Choi*, Kangyoun Choe
The Journal of Mechanical Science and Technology, vol. 25, no. 3, pp.577-587, 2011 |
|
|
Effect of load torque on the stability of overhung rotors
K. B. Yim*, Bong-Jo Ryu
The Journal of Mechanical Science and Technology, vol. 25, no. 3, pp.589-595, 2011 |
|
|
Layer-wise finite element analysis of functionally graded cylindrical shell under dynamic load
M.H.Yas*, M.Shakeri, M.Heshmati, S.Mohammadi
The Journal of Mechanical Science and Technology, vol. 25, no. 3, pp.597-604, 2011 |
|
|
Numerical fluid structural interface analysis in condenser microphone design
Akbar Ranjbar, Mohammad-Ali Saeimi-Sadigh, Bashir Behjat*
The Journal of Mechanical Science and Technology, vol. 25, no. 3, pp.605-611, 2011 |
|
|
Propagation behavior of SH waves in layered piezoelectric plates
Myung Seob Son, Yeon June Kang*
The Journal of Mechanical Science and Technology, vol. 25, no. 3, pp.613-619, 2011 |
|
|
Position tracking control with load-sensing for energy-saving valve-controlled cylinder system
Seung Ho Cho* and Petr Noskievič
The Journal of Mechanical Science and Technology, vol. 26, no. 2, pp.617-625, 2012 |
|
|
A fingertip force sensor for underwater dexterous hand
Hua Wang*
The Journal of Mechanical Science and Technology, vol. 26, no. 2, pp.627-633, 2012 |
|
|
Iterative tuning of decoupling controller for 3-DOF precision motion stage
Wei Teng*, Qingfeng Gao, Xin Wu and Haihua Mu
The Journal of Mechanical Science and Technology, vol. 26, no. 2, pp.635-641, 2012 |
|
|
Vibration analysis on the rolling element bearing-rotor system of an air blower
Wu Hao, Zhou Qiong, Zhang Zhiming and An Qi*
The Journal of Mechanical Science and Technology, vol. 26, no. 3, pp.653-659, 2012 |
|
|
Inspection method of cable-stayed bridge using magnetic flux leakage detection: principle, sensor design, and signal processing
Fengyu Xu, Xingsong Wang* and HongtaoWu
The Journal of Mechanical Science and Technology, vol. 26, no. 3, pp.661-669, 2012 |
|
|
The effect of bending loads on the dynamic behaviors of a rolling guide
James Shih-Shyn Wu*, Jyh-Cheng Chang2 Gent-An Tsai, Ching-Yuan Lin and Feng-Ming Ou
The Journal of Mechanical Science and Technology, vol. 26, no. 3, pp.671-680, 2012 |
|
|
Effects of spray axis incident angle on heat transfer performance of rhombus-pitch shell-and-tube interior spray evaporator
Ru-Li Lin, Tong-Bou Chang* and Chih-Chang Liang
The Journal of Mechanical Science and Technology, vol. 26, no. 3, pp.681-688, 2012 |
|
|
Vibrational energy flow models for out-of-plane waves in finite thin shell
H.-W. Kwon, S.-Y. Hong, D.-H. Park, H.-G. Kil and J.-H. Song*
The Journal of Mechanical Science and Technology, vol. 26, no. 3, pp.689-701, 2012 |
|
|
The motion and deformation rate of a flexible hose connected to a mother ship
Kun-Woo Kim, Jae-Wook Lee and Wan-Suk Yoo*
The Journal of Mechanical Science and Technology, vol. 26, no. 3, pp.703-710, 2012 |
|
|
Improved dynamic equations for the generally configured Stewart platform manipulator
Siamak Pedrammehr*, Mehran Mahboubkhah and Navid Khani
The Journal of Mechanical Science and Technology, vol. 26, no. 3, pp.711-721, 2012 |
|
|
Fatigue analysis of the main frame of over head transportation vehicles using flexible multibody dynamics
Ji Won Yoon/Sung Pil Jung/Tae Won Park/Joong Kyung Park
The Journal of Mechanical Science and Technology, vol. 24, no. 3, pp.721-730, 2010 |
|
|
Isolation of vibrations due to speakers in audio-visual electronic devices without deteriorating vibration of speaker cone
Jong-Oh Sun and Kwang-joon Kim*
The Journal of Mechanical Science and Technology, vol. 26, no. 3, pp.723-730, 2012 |
|
|
Active vibration control of clamped beams using positive position feedback controllers with moment pair
Changjoo Shin, Chinsuk Hong* and Weui Bong Jeong
The Journal of Mechanical Science and Technology, vol. 26, no. 3, pp.731-740, 2012 |
|
|
Hybrid discretization method for time-delay nonlinear systems
Zheng Zhang/Olga Kostyukova/Yuanliang Zhang/Kil To Chong
The Journal of Mechanical Science and Technology, vol. 24, no. 3, pp.731-741, 2010 |
|
|
method of measuring acoustic absorption coefficient of a material specimen using a dynamic microphone
Jin Xie and Shih-Fu Ling*
The Journal of Mechanical Science and Technology, vol. 26, no. 3, pp.741-748, 2012 |
|
|
Road profile estimation using neural network algorithm
Mahdi Yousefzadeh/Shahram Azadi/Abbas Soltani
The Journal of Mechanical Science and Technology, vol. 24, no. 3, pp.743-754, 2010 |
|
|
Adaptive neural network controller for the molten steel level control of strip casting processes
Hung-Yi Chen/Shiuh-Jer Huang
The Journal of Mechanical Science and Technology, vol. 24, no. 3, pp.755-760, 2010 |
|
|
An investigation on the integrated human driver model for closed-loop simulation of intelligent safety systems
Taeyoung Lee/Juyong Kang/Kyongsu Yi/Kihan Noh
The Journal of Mechanical Science and Technology, vol. 24, no. 3, pp.761-767, 2010 |
|
|
Automatic emotional expression of a face robot by using a reactive behavior decision model
Kyung-geune Oh/Myoung-soo Jang/Seung-Jong Kim
The Journal of Mechanical Science and Technology, vol. 24, no. 3, pp.769-774, 2010 |
|
|
Investigating the thermal environment effects on geometrically nonlinear vibration of smart functionally graded plates
Farzad Ebrahimi/Abbas Rastgoo/Mansoor Nikkhah Bahrami
The Journal of Mechanical Science and Technology, vol. 24, no. 3, pp.775-791, 2010 |
|
|
Design, implementation, and test of skid steering-based autonomous driving controller for a robotic vehicle with articulated suspension
Juyong Kang/Wongun Kim/Jongseok Lee/Kyongsu Yi
The Journal of Mechanical Science and Technology, vol. 24, no. 3, pp.793-800, 2010 |
|
|
Identification of a crack in a beam by the boundary element method
Jinhee Lee
The Journal of Mechanical Science and Technology, vol. 24, no. 3, pp.801-804, 2010 |
|
|
Vibration of bilayered cylindrical shells with layers of different materials
S. H. Arshad/M. N. Naeem/N. Sultana/Z. Iqbal/A. G. Shah
The Journal of Mechanical Science and Technology, vol. 24, no. 3, pp.805-810, 2010 |
|
|
Bearing fault detection and diagnosis based on order tracking and Teager-Huang transform
Hui Li/Yuping Zhang/Haiqi Zheng
The Journal of Mechanical Science and Technology, vol. 24, no. 3, pp.811-822, 2010 |
|
|
Multi-objective optimization of the tooth surface in helical gears using design of experiment and the response surface method
Chan IL Park
The Journal of Mechanical Science and Technology, vol. 24, no. 3, pp.823-829, 2010 |
|
|
An optimized rational fraction polynomial approach for modal parameters estimation from FRF measurements
Omar Omar/Nejah Tounsi/Eu-Gene Ng/M. A. Elbestawi
The Journal of Mechanical Science and Technology, vol. 24, no. 3, pp.831-842, 2010 |
|
|
Robust proportional-integral Kalman filter design using a convex optimization method
Kunsoo Huh
The Journal of Mechanical Science and Technology, vol. 22, no. 5, pp.879-886, 2008 |
|
|
Manipulability analysis of underwater robotic arms on ROV and application to task-oriented joint configuration
Seungmin Kim
The Journal of Mechanical Science and Technology, vol. 22, no. 5, pp.887-894, 2008 |
|
|
A proposition for new vehicle dynamic performance index
Unkoo Lee
The Journal of Mechanical Science and Technology, vol. 23, no. 4, pp.889-893, 2009 |
|
|
Real-time state observers based on multibody models and the extended Kalman filter
Javier Cuadrado
The Journal of Mechanical Science and Technology, vol. 23, no. 4, pp.894-900, 2009 |
|
|
Design, drive and control of a novel SMA-actuated humanoid flexible gripper
Kai Yang
The Journal of Mechanical Science and Technology, vol. 22, no. 5, pp.895-904, 2008 |
|
|
Energy-consistent integration of multibody systems with friction
Stefan Uhlar
The Journal of Mechanical Science and Technology, vol. 23, no. 4, pp.901-909, 2009 |
|
|
Estimability measures and their application to GPS/INS
Sinpyo Hong
The Journal of Mechanical Science and Technology, vol. 22, no. 5, pp.905-913, 2008 |
|
|
A study on the dynamic performance of the 200km/h Korean tilting train by means of roller rig test
Nam-Po Kim
The Journal of Mechanical Science and Technology, vol. 23, no. 4, pp.910-913, 2009 |
|
|
Look-ahead preview control application to the high-mobility tracked vehicle model with trailing arms
Okhyun Kang
The Journal of Mechanical Science and Technology, vol. 23, no. 4, pp.914-917, 2009 |
|
|
Dynamic cutting force on-line estimation using a 4-electrode cylindrical capacitive displacement sensor mounted on a high speed milling spindle
Il-Hae Kim
The Journal of Mechanical Science and Technology, vol. 22, no. 5, pp.914-923, 2008 |
|
|
An improved model-based predictive control of vehicle trajectory by using nonlinear function
Jeong-Han Lee
The Journal of Mechanical Science and Technology, vol. 23, no. 4, pp.918-922, 2009 |
|
|
The articulated vehicle dynamic analysis using the AWS (All Wheel Steering) ECU (Electronic Control Unit) test
Soo-Ho Lee
The Journal of Mechanical Science and Technology, vol. 23, no. 4, pp.923-926, 2009 |
|
|
Heat transfer analysis during a curing process for UV nanoimprint lithography
Insoo Park
The Journal of Mechanical Science and Technology, vol. 23, no. 4, pp.927-930, 2009 |
|
|
Volumetric modification of the Hertz contact problem and its application to the multibody dynamics simulation
Ivan Kosenko
The Journal of Mechanical Science and Technology, vol. 23, no. 4, pp.931-937, 2009 |
|
|
Sensitivity analysis of suspension characteristics for Korean high speed train
Chankyoung Park
The Journal of Mechanical Science and Technology, vol. 23, no. 4, pp.938-941, 2009 |
|
|
Nano positioning control for dual stage using minimum order observer
Hong Gun Kim*
The Journal of Mechanical Science and Technology, vol. 26, no. 3, pp.941-947, 2012 |
|
|
Synthetic analysis of flexible multibody system including a very flexible body
Ji-Won Yoon
The Journal of Mechanical Science and Technology, vol. 23, no. 4, pp.942-945, 2009 |
|
|
A recursive subsystem synthesis method for repeated closed loop structure in multibody dynamics
Sung-Soo Kim
The Journal of Mechanical Science and Technology, vol. 23, no. 4, pp.946-949, 2009 |
|
|
Implementation of real-time positioning system using extended Kalman filter and artificial landmark on ceiling
Angga Rusdinar, Jungmin Kim, Junha Lee and Sungshin Kim*
The Journal of Mechanical Science and Technology, vol. 26, no. 3, pp.949-958, 2012 |
|
|
A study on the optimization method for a multi-body system using the response surface analysis
Sung-Pil Jung
The Journal of Mechanical Science and Technology, vol. 23, no. 4, pp.950-953, 2009 |
|
|
Experimental validation of steering torque feedback simulator through vehicle running test
Taichi Shiiba
The Journal of Mechanical Science and Technology, vol. 23, no. 4, pp.954-959, 2009 |
|
|
Analysis of the effects of main design parameters variation on the vibration characteristics of a vehicle sub-frame
Bum Suk Kim
The Journal of Mechanical Science and Technology, vol. 23, no. 4, pp.960-963, 2009 |
|
|
Study of impact energy propagation phenomenon and modal characteristics of an armored vehicle undergoing high velocity impact
Man Hoi Koo
The Journal of Mechanical Science and Technology, vol. 23, no. 4, pp.964-967, 2009 |
|
|
Sloshing cargo in silo vehicles
Florian Fleissner
The Journal of Mechanical Science and Technology, vol. 23, no. 4, pp.968-973, 2009 |
|
|
Study on intelligent baby carriage with power assist system and comfortable basket
Takeshi Kawashima
The Journal of Mechanical Science and Technology, vol. 23, no. 4, pp.974-979, 2009 |
|
|
Stabilization of a bicycle with two-wheel steering and two-wheel driving by driving forces at low speed
Chihiro Nakagawa
The Journal of Mechanical Science and Technology, vol. 23, no. 4, pp.980-986, 2009 |
|
|
Nonlinear vibration and rippling instability for embedded carbon nanotubes
Payam Soltani*, D. D. Ganji, I. Mehdipour and A. Farshidianfar
The Journal of Mechanical Science and Technology, vol. 26, no. 4, pp.985-992, 2012 |
|
|
Modeling and controller design of manta-type unmanned underwater test vehicle
Seung-Keon Lee
The Journal of Mechanical Science and Technology, vol. 23, no. 4, pp.987-990, 2009 |
|
|
On-line and off-line wheel/rail contact algorithm in the analysis of multibody railroad vehicle systems
Hiroyuki Sugiyama
The Journal of Mechanical Science and Technology, vol. 23, no. 4, pp.991-996, 2009 |
|
|
Direct identification of non-proportional modal damping matrix for lumped mass system using modal parameters
Cheonhong Min, Hanil Park* and Sooyong Park
The Journal of Mechanical Science and Technology, vol. 26, no. 4, pp.993-1002, 2012 |
|
|
Experiments of optimal delay extraction algorithm using adaptive time-delay filter for improved vibration suppression
Joo-Han Park
The Journal of Mechanical Science and Technology, vol. 23, no. 4, pp.997-1000, 2009 |
|
|
Study of rocking motion of rigid body with slide contact
Keisuke Nozaki
The Journal of Mechanical Science and Technology, vol. 23, no. 4, pp.1001-1007, 2009 |
|
|
Interior noise analysis of a construction equipment cabin based on airborne and structure-borne noise predictions
Sung-Hee Kim, Suk-Yoon Hong*, Jee-Hun Song and Won-Ho Joo
The Journal of Mechanical Science and Technology, vol. 26, no. 4, pp.1003-1009, 2012 |
|
|
Implementation of frequency-shaped tip reference in conjunction with learning controller for improved tip-tracking control
Joo-Han Park
The Journal of Mechanical Science and Technology, vol. 23, no. 4, pp.1008-1011, 2009 |
|
|
Free vibration analysis of a hermetic capsule by pseudospectral method
Jinhee Lee*
The Journal of Mechanical Science and Technology, vol. 26, no. 4, pp.1011-1015, 2012 |
|
|
Numerical integration of discrete mechanical systems with mixed holonomic and control constraints
Peter Betsch
The Journal of Mechanical Science and Technology, vol. 23, no. 4, pp.1012-1018, 2009 |
|
|
Parameter characteristics of rail inspection measurement system of HSR-350x
Sang-Soo Kim
The Journal of Mechanical Science and Technology, vol. 23, no. 4, pp.1019-1022, 2009 |
|
|
Study on side collision reconstruction using database based on deformed shape information
Jeonghyun Sohn
The Journal of Mechanical Science and Technology, vol. 23, no. 4, pp.1023-1026, 2009 |
|
|
The spherical involute bevel gear: its geometry, kinematic behavior and standardization
Noh Gill Park, Hyoung Woo Lee*
The Journal of Mechanical Science and Technology, vol. 25, no. 4, pp.1023-1034, 2011 |
|
|
A study on the modeling and analysis of a helicopter’s occupant seat belt for crashworthiness
Young-Shin Lee
The Journal of Mechanical Science and Technology, vol. 23, no. 4, pp.1027-1030, 2009 |
|
|
Indentation experiment and analysis on mold and resin material during the nanoimprint process
Rae-Hyeong Ryu
The Journal of Mechanical Science and Technology, vol. 23, no. 4, pp.1031-1034, 2009 |
|
|
Analysis and design study of LCD transfer robot using dynamic simulation and experiment
Jong-Hwi Seo
The Journal of Mechanical Science and Technology, vol. 23, no. 4, pp.1035-1039, 2009 |
|
|
Cushion pressure control system for an intelligent air-cushion track vehicle
Altab Hossain, Ataur Rahman, A.K.M. Mohiuddin
The Journal of Mechanical Science and Technology, vol. 25, no. 4, pp.1035-1041, 2011 |
|
|
Investigation and design of a new shock absorbing device that cooperates between two colliding objects
Atsushi Kawaguchi
The Journal of Mechanical Science and Technology, vol. 23, no. 4, pp.1040-1045, 2009 |
|
|
Design and analysis of an infrared range sensor system for floor-state estimation
Minyoung Lee, Sooyong Lee*
The Journal of Mechanical Science and Technology, vol. 25, no. 4, pp.1043-1050, 2011 |
|
|
Development of enhanced ESP system through vehicle parameter estimation
Hansung Lee
The Journal of Mechanical Science and Technology, vol. 23, no. 4, pp.1046-1049, 2009 |
|
|
An enhanced real-time dynamic imbalance correction for precision rotors
Jung Kwan Lee
The Journal of Mechanical Science and Technology, vol. 23, no. 4, pp.1050-1053, 2009 |
|
|
Development of an articulated mine-detecting manipulator system for mobile robots
Seungnam Yu*, Changhwan Choi, Seungyeol Lee, Jeongyeob Lee, Changsoo Han*
The Journal of Mechanical Science and Technology, vol. 25, no. 4, pp.1051-1060, 2011 |
|
|
Dynamic analysis of a PDP exhaust hole processing equipment considering glass substrate interaction
Min-Ku Kuk
The Journal of Mechanical Science and Technology, vol. 23, no. 4, pp.1054-1057, 2009 |
|
|
Dynamic behaviors of nonlinear fractional-order differential oscillator
Wei ZHANG
The Journal of Mechanical Science and Technology, vol. 23, no. 4, pp.1058-1064, 2009 |
|
|
Grey fuzzy PI control for packing pressure during injection molding process
Shuo Wang, Ji Ying*, Zichen Chen, Kan Cai
The Journal of Mechanical Science and Technology, vol. 25, no. 4, pp.1061-1068, 2011 |
|
|
Development of a motion simulator for testing a mobile surveillance robot
Sung-Soo Kim
The Journal of Mechanical Science and Technology, vol. 23, no. 4, pp.1065-1070, 2009 |
|
|
Reliability prediction of the fatigue life of a crankshaft
Do-Hyun Jung
The Journal of Mechanical Science and Technology, vol. 23, no. 4, pp.1071-1074, 2009 |
|
|
Adaptive nonlinear control using input normalized neural networks
Henzeh Leeghim
The Journal of Mechanical Science and Technology, vol. 22, no. 6, pp.1073-1083, 2008 |
|
|
Sensitivity of a vehicle ride to the suspension bushing characteristics
Jorge Ambrósio
The Journal of Mechanical Science and Technology, vol. 23, no. 4, pp.1075-1082, 2009 |
|
|
Dynamic simulation of wire rope with contact
Etsujiro Imanishi
The Journal of Mechanical Science and Technology, vol. 23, no. 4, pp.1083-1088, 2009 |
|
|
Kinematic parameter calibration method for industrial robot manipulator using the relative position
In-Chul Ha
The Journal of Mechanical Science and Technology, vol. 22, no. 6, pp.1084-1090, 2008 |
|
|
Simulating dynamics, durability and noise emission of wind turbines in a single CAE environment
Guillaume Lethé
The Journal of Mechanical Science and Technology, vol. 23, no. 4, pp.1089-1093, 2009 |
|
|
Adaptive control and stability analysis of nonlinear crane systems with perturbation
Kwon Soon Lee
The Journal of Mechanical Science and Technology, vol. 22, no. 6, pp.1091-1098, 2008 |
|
|
Multi-layer alignment control of a large area nano-imprinting stage
Hong Jae Yim
The Journal of Mechanical Science and Technology, vol. 23, no. 4, pp.1094-1097, 2009 |
|
|
A study on tension behavior considering thermal effects in roll-to-roll E-printing
Changwoo Lee, Hyunkyoo Kang, Keehyun Shin
The Journal of Mechanical Science and Technology, vol. 24, no. 5, pp.1097-1103, 2010 |
|
|
Optimization of the industrial guide-way vehicle to improve the running stability
Kab-Jin Jun
The Journal of Mechanical Science and Technology, vol. 23, no. 4, pp.1098-1101, 2009 |
|
|
Trajectory optimization and the control of a re-entry vehicle in TAEM phase
Dae-Woo Lee
The Journal of Mechanical Science and Technology, vol. 22, no. 6, pp.1099-1110, 2008 |
|
|
Study on the general characteristics of the sound radiation of a rectangular plate with different boundary edge conditions
Ji Woo Yoo
The Journal of Mechanical Science and Technology, vol. 24, no. 5, pp.1111-1118, 2010 |
|
|
Damage detection of damaged beam by constrained displacement curvature
Hee-Chang Eun
The Journal of Mechanical Science and Technology, vol. 22, no. 6, pp.1111-1120, 2008 |
|
|
Effects of structural configuration on vibration control of smart laminated beams under random excitations
Abolghassem Zabihollah
The Journal of Mechanical Science and Technology, vol. 24, no. 5, pp.1119-1125, 2010 |
|
|
Design of the intake system for reducing the noise in the automobile using support vector regression
Jae-Eung Oh
The Journal of Mechanical Science and Technology, vol. 22, no. 6, pp.1121-1131, 2008 |
|
|
Receding horizon viability radius for stability of humanoid robot under external perturbation
Sangyong Lee, Munsang Kim, Jongwon Kim, Mun-Taek Choi
The Journal of Mechanical Science and Technology, vol. 24, no. 5, pp.1127-1139, 2010 |
|
|
Robust extended Kalman filter of discrete-time Markovian jump nonlinear system under uncertain noise
Junhong Park
The Journal of Mechanical Science and Technology, vol. 22, no. 6, pp.1132-1139, 2008 |
|
|
Numerical estimation of dynamic behavior of viscoelastic elastomer specimen
Inwon Lee
The Journal of Mechanical Science and Technology, vol. 22, no. 6, pp.1140-1148, 2008 |
|
|
Design of a hydraulic anti-lock braking system (ABS) for a motorcycle
Chun-Kuei Huang, Ming-Chang Shih
The Journal of Mechanical Science and Technology, vol. 24, no. 5, pp.1141-1149, 2010 |
|
|
Robust sliding mode control for uncertain servo system using friction observer and recurrent fuzzy neural networks
Seong Ik Han, Chan Se Jeong and Soon Yong Yang*
The Journal of Mechanical Science and Technology, vol. 26, no. 4, pp.1149-1159, 2012 |
|
|
Optimum design of 6-DOF parallel manipulator with translational/rotational workspaces for haptic device application
Jung Won Yoon, Jeha Ryu, Yoon-Kwon Hwang
The Journal of Mechanical Science and Technology, vol. 24, no. 5, pp.1151-1162, 2010 |
|
|
Modeling of an air motor servo system and robust sliding mode controller design
Chia-Hua Lu* and Yean-Ren Hwang
The Journal of Mechanical Science and Technology, vol. 26, no. 4, pp.1161-1169, 2012 |
|
|
Modeling and simulation of hydrostatic transmission system with energy regeneration using hydraulic accumulator
Triet Hung HO, Kyoung Kwan AHN
The Journal of Mechanical Science and Technology, vol. 24, no. 5, pp.1163-1175, 2010 |
|
|
Design and simulation for a hydraulic actuated quadruped robot
Xuewen Rong, Yibin Li*, Jiuhong Ruan and Bin Li
The Journal of Mechanical Science and Technology, vol. 26, no. 4, pp.1171-1177, 2012 |
|
|
Load transportation by dual arm robot using sliding mode control
Nurkan Yagiz, Yuksel Hacioglu, Yunus Ziya Arslan
The Journal of Mechanical Science and Technology, vol. 24, no. 5, pp.1177-1184, 2010 |
|
|
Neuro-fuzzy control strategy for an offshore steel jacket platform subjected to wave-induced forces using magnetorheological dampers
Atabak Sarrafan*, Seiyed Hamid Zareh, Amir Ali Akbar Khayyat and Abolghassem Zabihollah
The Journal of Mechanical Science and Technology, vol. 26, no. 4, pp.1179-1196, 2012 |
|
|
Collision detection and reaction on 7 DOF service robot arm using residual observer
Chang-Nho Cho, Joon-Hong Kim, Sang-Duck Lee and Jae-Bok Song*
The Journal of Mechanical Science and Technology, vol. 26, no. 4, pp.1197-1203, 2012 |
|
|
Random displacement and acceleration responses of vehicles with uncertainty
Jun Dai, Wei Gao* and Nong Zhang
The Journal of Mechanical Science and Technology, vol. 25, no. 5, pp.1221-1229, 2011 |
|
|
Effect of low-frequency vibration on workpiece in EDM processes
Gunawan Setia Prihandana*, Muslim Mahardika, M. Hamdi and Kimiyuki Mitsui
The Journal of Mechanical Science and Technology, vol. 25, no. 5, pp.1231-1234, 2011 |
|
|
C0-continuous isoparametric Timoshenko beam element for rot
Yong-Woo Kim* and Jaeho Jeong
The Journal of Mechanical Science and Technology, vol. 25, no. 5, pp.1235-1246, 2011 |
|
|
Structural optimization of an automobile transmission case to minimize radiation noise using the model reduction technique
Jung-Sun Choi1, Hyun-Ah Lee1, Ji-Yeong Lee2,*, Gyung-Jin Park2, Junhong Park1, Chae-Hong Lim3 and Ki-Jong Park3
The Journal of Mechanical Science and Technology, vol. 25, no. 5, pp.1247-1255, 2011 |
|
|
A ship berthing system design with four tug boats
Van Phuoc Bui, Hideki Kawai, Young Bok Kim* and Kwon Soon Lee
The Journal of Mechanical Science and Technology, vol. 25, no. 5, pp.1257-1264, 2011 |
|
|
Comparisons of 4WS and Brake-FAS based on IMC for vehicle stability control
Men Jinlai*, Wu Bofu and Chen Jie
The Journal of Mechanical Science and Technology, vol. 25, no. 5, pp.1265-1277, 2011 |
|
|
Detection of faults in gearboxes using acoustic emission signal
DongSik Gu, JaeGu kim, YoungSu An and ByeongKeun Choi*
The Journal of Mechanical Science and Technology, vol. 25, no. 5, pp.1279-1286, 2011 |
|
|
Use of coded infrared light for mobile robot localization
Sooyong Lee
The Journal of Mechanical Science and Technology, vol. 22, no. 7, pp.1279-1286, 2008 |
|
|
Efficiency analysis of straight fin with variable heat transfer coefficient and thermal conductivity
Somayyeh Sadri*, Mohammad Reza Raveshi and Shayan Amiri
The Journal of Mechanical Science and Technology, vol. 26, no. 4, pp.1283-1290, 2012 |
|
|
Derivation of equations of motion of an unwinding cable from a cylindrical spool package
Jae-Wook Lee, Deuk-Man An and Wan-Suk Yoo*
The Journal of Mechanical Science and Technology, vol. 25, no. 5, pp.1287-1296, 2011 |
|
|
Comparative study of modeling and identification of the pneumatic artificial muscle (PAM) manipulator using recurrent neural networks
Kyoung Kwan Ahn
The Journal of Mechanical Science and Technology, vol. 22, no. 7, pp.1287-1298, 2008 |
|
|
Numerical analysis of the Nanjing Dashengguan Yangtze River Bridge subjected to non-uniform seismic excitations
Chaoyi Xia and Tieyi Zhong*
The Journal of Mechanical Science and Technology, vol. 25, no. 5, pp.1297-1306, 2011 |
|
|
Sensitivity analysis of track parameters on train-track dynamic interaction
Jabbar Ali Zakeri
The Journal of Mechanical Science and Technology, vol. 22, no. 7, pp.1299-1304, 2008 |
|
|
Suggestion of MSTV (Modified-Stick-Transition-Velocity) model for hysteretic damping mechanism
Wan-Suk Yoo
The Journal of Mechanical Science and Technology, vol. 22, no. 7, pp.1305-1312, 2008 |
|
|
Identification of modal parameters from nonstationary ambient vibration data using the channel-expansion technique
Dar-Yun Chiang and Chang-Sheng Lin*
The Journal of Mechanical Science and Technology, vol. 25, no. 5, pp.1307-1315, 2011 |
|
|
Application of bouc-wen model to frequency-dependen nonlinear hysteretic friction damper
Dong-Woo Kang/ Sung-Woon Jung/ Gyung-Hun Nho/ Jin-Kyu Ok/ Wan-Suk Yoo
The Journal of Mechanical Science and Technology, vol. 24, no. 6, pp.1311-1317, 2010 |
|
|
Development of integrated evolutionary optimization algorithm and its application to optimum design of ship structures
Bo-Suk Yang
The Journal of Mechanical Science and Technology, vol. 22, no. 7, pp.1313-1322, 2008 |
|
|
An accurate and simple model for flexible satellites for three-dimensional studies
Shahram Shahriari/ Shahram Azadi/ Majid M. Moghaddam
The Journal of Mechanical Science and Technology, vol. 24, no. 6, pp.1319-1327, 2010 |
|
|
Force analysis of bearings on a modified mechanism using propose drecurrent hybrid neural networks
Şahin Yildirim
The Journal of Mechanical Science and Technology, vol. 22, no. 7, pp.1323-1329, 2008 |
|
|
Measuring displacement signal with an accelerometer
Sangbo Han
The Journal of Mechanical Science and Technology, vol. 24, no. 6, pp.1329-1335, 2010 |
|
|
Damped least square based genetic algorithm with Ggaussian distribution of damping factor for singularity-robust inverse kinematics
Hunmo Kim
The Journal of Mechanical Science and Technology, vol. 22, no. 7, pp.1330-1338, 2008 |
|
|
Real-time regulated sliding mode controller design of multiple manipulator space free-flying robot
Hamid Khaloozadeh/ M. Reza Homaeinejad
The Journal of Mechanical Science and Technology, vol. 24, no. 6, pp.1337-1351, 2010 |
|
|
Control of line width with active nano fountain pen (ANFP) for nano manufacturing
Hun-mo Kim
The Journal of Mechanical Science and Technology, vol. 22, no. 7, pp.1339-1348, 2008 |
|
|
Identification of impact force in thick plates based on the elastodynamics and time-frequency method (I) -Theoretical approach for identification the impact force based on elastodynamics-
Sang Kwon Lee
The Journal of Mechanical Science and Technology, vol. 22, no. 7, pp.1349-1358, 2008 |
|
|
Design and analysis of an active steering bogie for urban trains
Joon-Hyuk Park/Hyo-In Koh/Hyun-Moo Hur/ Min-Soo Kim/ Won-Hee You
The Journal of Mechanical Science and Technology, vol. 24, no. 6, pp.1353-1362, 2010 |
|
|
Variable structure fuzzy control using three input variables for reducing motion tracking errors
Chul-Goo Kang
The Journal of Mechanical Science and Technology, vol. 23, no. 5, pp.1354-1364, 2009 |
|
|
Identification of impact force in thick plates based on the elastodynamics and time-frequency method (II) - Experimental approach for identification of the impact force based on
Sang-Kwon Lee
The Journal of Mechanical Science and Technology, vol. 22, no. 7, pp.1359-1373, 2008 |
|
|
Lubrication characteristics of dual piston ring in bent-axis type piston pumps
IhnSung Cho/ IlHyun Beak/JaeCheon Jo/JuMi Park/ SeokHyung Oh/ JaeYoun Jung
The Journal of Mechanical Science and Technology, vol. 24, no. 6, pp.1363-1368, 2010 |
|
|
Multi-agent based traffic simulation and integrated control of freeway corridors: Part 1 simulation and control model
Chul-Ho Bae
The Journal of Mechanical Science and Technology, vol. 23, no. 5, pp.1365-1373, 2009 |
|
|
Multi-agent based traffic simulation and integrated control of freeway corridors: Part 2 integrated control optimization
Chul-Ho Bae
The Journal of Mechanical Science and Technology, vol. 23, no. 5, pp.1374-1382, 2009 |
|
|
Transfer matrix for rotor coupler with parallel misalignment
Chao-Yang Tsai
The Journal of Mechanical Science and Technology, vol. 23, no. 5, pp.1383-1395, 2009 |
|
|
A finite thin circular beam element for out-of-plane vibration analysis of curved beams
Bo Yeon Kim
The Journal of Mechanical Science and Technology, vol. 23, no. 5, pp.1396-1405, 2009 |
|
|
A pressure output feedback control of turbo compressor surge with a thrust magnetic bearing actuator
Hyeong-Joon Ahn
The Journal of Mechanical Science and Technology, vol. 23, no. 5, pp.1406-1414, 2009 |
|
|
Application of 2D-infinite beam elements in dynamic analysis of train-track interaction
Jabbar Ali Zakeri
The Journal of Mechanical Science and Technology, vol. 23, no. 5, pp.1415-1421, 2009 |
|
|
Pseudospectral analysis of buckling and free vibration of rectangular Mindlin plates
Jinhee Lee
The Journal of Mechanical Science and Technology, vol. 23, no. 5, pp.1422-1427, 2009 |
|
|
Analysis of dynamic characteristics for vibration of flexural beam in ultrasonic transport system
G.H. Kim
The Journal of Mechanical Science and Technology, vol. 23, no. 5, pp.1428-1434, 2009 |
|
|
Passive vibration damping enhancement of piezoelectric shunt damping system using optimization approach
Jin-Young Jeon
The Journal of Mechanical Science and Technology, vol. 23, no. 5, pp.1435-1445, 2009 |
|
|
Passive acoustic radiation control for a vibrating panel with piezoelectric shunt damping circuit using particle swarm optimization algorithm
Jin-Young Jeon
The Journal of Mechanical Science and Technology, vol. 23, no. 5, pp.1446-1455, 2009 |
|
|
Experimental analysis for reducing refrigerant-induced noise of 4-way cassette type air conditioner
Hyung Suk Han
The Journal of Mechanical Science and Technology, vol. 23, no. 5, pp.1456-1467, 2009 |
|
|
Data-driven approach to machine condition prognosis using least square regression tree
Van Tung Tran
The Journal of Mechanical Science and Technology, vol. 23, no. 5, pp.1468-1475, 2009 |
|
|
Phase of acoustic impedance and performance of standing wave thermoacoustic coolers
Insu Paek
The Journal of Mechanical Science and Technology, vol. 23, no. 5, pp.1476-1484, 2009 |
|
|
Modeling of a magneto-rheological (MR) fluid damper using a self tuning fuzzy mechanism
Kyoung Kwan Ahn
The Journal of Mechanical Science and Technology, vol. 23, no. 5, pp.1485-1499, 2009 |
|
|
Development of a wall-climbing robot using a tracked wheel mechanism
Jongwon Kim
The Journal of Mechanical Science and Technology, vol. 22, no. 8, pp.1490-1498, 2008 |
|
|
IDENTIFICATION OF AIRWAY CHARACTERISTICS USING THE INPUT IMPEDANCE
Seonhwan Cheong
The Journal of Mechanical Science and Technology, vol. 22, no. 8, pp.1499-1503, 2008 |
|
|
Optimal microchannel design using genetic algorithms
Hyunwoo Bang
The Journal of Mechanical Science and Technology, vol. 23, no. 5, pp.1500-1507, 2009 |
|
|
Experimental Identification for Inverse Problem of a Mechanical System with a Non-minimum Phase Based on Singular Value Decomposition
Sang Kwon Lee
The Journal of Mechanical Science and Technology, vol. 22, no. 8, pp.1504-1509, 2008 |
|
|
Elastic stresses and failure of rotating cross-ply laminate disks
Kyo-Nam Koo
The Journal of Mechanical Science and Technology, vol. 23, no. 5, pp.1508-1514, 2009 |
|
|
Dissipative proportional integral observer for a class of uncertain nonlinear systems
Jongchul Jung, Donghwi Lee and Kunsoo Huh*
The Journal of Mechanical Science and Technology, vol. 25, no. 6, pp.1551-1555, 2011 |
|
|
Development of integrated controller for a compound hybrid excavator
Jaewoong Choi, Hakgu Kim, Seungjin Yu and Kyongsu Yi1,*
The Journal of Mechanical Science and Technology, vol. 25, no. 6, pp.1557-1563, 2011 |
|
|
Design of a rollover prevention controller with differential game theory and a coevolutionary genetic algorithm
Seongjin Yim*
The Journal of Mechanical Science and Technology, vol. 25, no. 6, pp.1565-1571, 2011 |
|
|
Nonlinear dynamic analysis of a relatively short spherical gas journal bearing system
Cheng-Chi Wang
The Journal of Mechanical Science and Technology, vol. 24, no. 8, pp.1565-1571, 2010 |
|
|
Influence of rub groove on rotordynamics associated with leakage air flow through a labyrinth seal
Ying Zheng Liu
The Journal of Mechanical Science and Technology, vol. 24, no. 8, pp.1573-1581, 2010 |
|
|
Drive control algorithm for an independent 8 in-wheel motor drive vehicle
Wongun Kim, Kyongsu Yi* and Jongseok Lee
The Journal of Mechanical Science and Technology, vol. 25, no. 6, pp.1573-1581, 2011 |
|
|
Robust adaptive deadzone and friction compensation of robot manipulator using RWCMAC network
Seong Ik Han, Kwon Soon Lee , Min Gyu Park and Jang Myung Lee*
The Journal of Mechanical Science and Technology, vol. 25, no. 6, pp.1583-1594, 2011 |
|
|
Correlation study of a rotor in descending flight using DYMORE with a freewake model
Sung Nam Jung
The Journal of Mechanical Science and Technology, vol. 24, no. 8, pp.1583-1594, 2010 |
|
|
Determination of the force of the actuators and constraint forces in the inverse dynamic analysis of mechanisms
Lluïsa Jordi-Nebot
The Journal of Mechanical Science and Technology, vol. 24, no. 8, pp.1595-1601, 2010 |
|
|
CMAC-based compound control of hydraulically driven 6-DOF parallel manipulator
Shou-Kun Wang*, Jun-Zheng Wang and Da-Wei Shi
The Journal of Mechanical Science and Technology, vol. 25, no. 6, pp.1595-1602, 2011 |
|
|
Accurate calibration of kinematic parameters for two wheel differential mobile robots
Kooktae Lee, Changbae Jung and Woojin Chung*
The Journal of Mechanical Science and Technology, vol. 25, no. 6, pp.1603-1611, 2011 |
|
|
Maximal power extraction strategy in the transition region and its benefit on the AEP (annul energy product)
Yoonsu Nam, Jeong-gi Kim* and Carlo L. Bottasso
The Journal of Mechanical Science and Technology, vol. 25, no. 6, pp.1613-1619, 2011 |
|
|
Magneto-rheological accumulator for temperature compensation in hydropneumatic suspension systems
Jeong-Uk Seo, Young-Won Yun and Myeong-Kwan Park*
The Journal of Mechanical Science and Technology, vol. 25, no. 6, pp.1621-1625, 2011 |
|
|
Thermomechanical material parameters characterization of the superalloy PN 3601669-7 under low-velocity impacts
Abdelkader Nour*, Samir Lecheb, Nouredine Chikh and M. Ouali Si-Chaïb
The Journal of Mechanical Science and Technology, vol. 25, no. 7, pp.1629-1636, 2011 |
|
|
Nonlinear dynamic response of a simply supported rectangular functionally graded material plate under the time-dependent thermalmechanical loads
Y. X. Hao, W. Zhang*, J. Yang and S. Y. Li
The Journal of Mechanical Science and Technology, vol. 25, no. 7, pp.1637-1646, 2011 |
|
|
Sensitivity analysis and kinematic calibration of 3-UCR symmetrical parallel robot leg
Gang Cheng*, Shi-Rong Ge and Jing-Li Yu
The Journal of Mechanical Science and Technology, vol. 25, no. 7, pp.1647-1655, 2011 |
|
|
Transverse impact characteristics of a rubber pipe expansion joint
Yong Chen, Wang Yu, ZhiYi Zhang and Hongxing Hua
The Journal of Mechanical Science and Technology, vol. 26, no. 6, pp.1655-1661, 2012 |
|
|
Parametric study of lateral stability for a railway vehicle
Joon-Hyuk Park*, Hyo-In Koh and Nam-Po Kim
The Journal of Mechanical Science and Technology, vol. 25, no. 7, pp.1657-1666, 2011 |
|
|
An innovative experimental on-road testing method and its demonstration on a prototype vehicle
José C. Páscoa, Francisco P. Brójo, Fernando C. Santos and Paulo O. Fael
The Journal of Mechanical Science and Technology, vol. 26, no. 6, pp.1663-1670, 2012 |
|
|
Influences of stochastic perturbation of parameters on dynamic behavior of gear system
Jian-Wei Lu*, Fan-Ling Zeng, Jia-Yun Xin, En-Min Miao and Meng-Jun Liu
The Journal of Mechanical Science and Technology, vol. 25, no. 7, pp.1667-1673, 2011 |
|
|
Contact finite element method for dynamic meshing characteristics analysis of continuous engaged gear drives
Yong-jun Wu, Jian-jun Wang and Qin-kai Han
The Journal of Mechanical Science and Technology, vol. 26, no. 6, pp.1671-1685, 2012 |
|
|
Impact noise radiated by collision of two spheres: Comparison between numerical simulations, experiments and analytical results
K. Mehraby, H. Khademhosseini Beheshti* and M. Poursina
The Journal of Mechanical Science and Technology, vol. 25, no. 7, pp.1675-1685, 2011 |
|
|
Stick-slip algorithm in a tangential contact force model for multi-body system dynamics
Ho-Young Cha, Juhwan Choi, Han Sik Ryu and Jin Hwan Choi*
The Journal of Mechanical Science and Technology, vol. 25, no. 7, pp.1687-1694, 2011 |
|
|
A modified random decrement technique for modal identification from nonstationary ambient response data only
Chang-Sheng Lin, Dar-Yun Chiang
The Journal of Mechanical Science and Technology, vol. 26, no. 6, pp.1687-1696, 2012 |
|
|
Relationship between subjective and objective evaluations of steering wheel vibration
Wan-Suk Yoo, Sang-Do Na and Min-Seok Kim*
The Journal of Mechanical Science and Technology, vol. 25, no. 7, pp.1695-1701, 2011 |
|
|
On the chaotic dynamic response of deterministic nonlinear single and multi-degree-of-freedom systems
S. K. A. Shah, A. Soleiman Fallah and L. A Louca
The Journal of Mechanical Science and Technology, vol. 26, no. 6, pp.1697-1709, 2012 |
|
|
Vibration control of the axisymmetric spherical pendulum by dynamic vibration absorber moving in radial direction
L. D. Viet* and Youngjin Park
The Journal of Mechanical Science and Technology, vol. 25, no. 7, pp.1703-1709, 2011 |
|
|
Sub-workspace design of binary manipulators using active and passive joints
Yoon Young Kim
The Journal of Mechanical Science and Technology, vol. 22, no. 9, pp.1707-1715, 2008 |
|
|
A joint adaptive wavelet filter and morphological signal processing method for weak mechanical impulse extraction
Zhinong Jiang
The Journal of Mechanical Science and Technology, vol. 24, no. 8, pp.1709-1716, 2010 |
|
|
Analytical moment expression for linear element in diagonal form fast multipole boundary element method
Haijun Wu, Weikang Jiang* and Wenbo Lu
The Journal of Mechanical Science and Technology, vol. 25, no. 7, pp.1711-1715, 2011 |
|
|
Random forests classifier for machine fault diagnosis
Bo-Suk Yang
The Journal of Mechanical Science and Technology, vol. 22, no. 9, pp.1716-1725, 2008 |
|
|
Predictive position and force control for shape memory alloy cylinders
Kyoung Kwan Ahn
The Journal of Mechanical Science and Technology, vol. 24, no. 8, pp.1717-1728, 2010 |
|
|
Analysis of piston behavior according to eccentricity ratio of disk in bent-axis type piston pump
Jae-Youn Jung
The Journal of Mechanical Science and Technology, vol. 22, no. 9, pp.1726-1733, 2008 |
|
|
Crosstalk calibration for torque sensor using actual sensing frame
Jae-Bok Song
The Journal of Mechanical Science and Technology, vol. 24, no. 8, pp.1729-1735, 2010 |
|
|
Design and fabrication of a scanning electron microscope using a finite element analysis for electron optical system
Dong-Chul Han
The Journal of Mechanical Science and Technology, vol. 22, no. 9, pp.1734-1746, 2008 |
|
|
Combined estimation method for inertia properties of STSAT-3
Sangchul Lee
The Journal of Mechanical Science and Technology, vol. 24, no. 8, pp.1737-1741, 2010 |
|
|
Robust tracking of robot manipulator with nonlinear friction using time delay control with gradient estimator
Dong Ki Han
The Journal of Mechanical Science and Technology, vol. 24, no. 8, pp.1743-1752, 2010 |
|
|
Effect of manufacturing tolerances on dynamic equilibria of multibody systems undergoing prescribed rotational motion
Dong Hwan Choi
The Journal of Mechanical Science and Technology, vol. 22, no. 9, pp.1747-1756, 2008 |
|
|
Aeroelastic behavior of a slender body considering free fittings
M. Ehramianpour, H. Haddadpour, M. T. Ahmadian
The Journal of Mechanical Science and Technology, vol. 24, no. 9, pp.1755-1762, 2010 |
|
|
A self-sensing technology of active magnetic bearings using a phase modulation algorithm based on a high frequency voltage injection method
Dong Chul Han
The Journal of Mechanical Science and Technology, vol. 22, no. 9, pp.1757-1764, 2008 |
|
|
Analysis of total harmonic distortion in microspeakers considering coupling effect
Lee Chang-Min, Kwon Joong-Hak, Hwang Sang-Moon
The Journal of Mechanical Science and Technology, vol. 24, no. 9, pp.1763-1769, 2010 |
|
|
Precise spring constant assignment in elastic network model for identification of vibration frequency and modeshape
Mingwen Hu, Sharad Raj, Byung Kim, Wing Kam Liu, Seunghyun Baik, Taesung Kim, Byeong-Soo Lim, Moon Ki Kim
The Journal of Mechanical Science and Technology, vol. 24, no. 9, pp.1771-1780, 2010 |
|
|
Performance characterization of a small-capacity thermoacoustic cooler for air-conditioning applications
Insu Paek, Luc Mongeau, James E. Braun
The Journal of Mechanical Science and Technology, vol. 24, no. 9, pp.1781-1791, 2010 |
|
|
Experimental investigation and performance analysis of a dual-cylinder opposed linear compressor
Huiming Zou*, Liqin Zhang, Guohong Peng and Changqing Tian
The Journal of Mechanical Science and Technology, vol. 25, no. 8, pp.1885-1892, 2011 |
|
|
A statistical characterization method for damping material properties and its application to structural-acoustic system design
Byung C. Jung, Dooho Lee*, Byeng D. Youn** and Soobum Lee
The Journal of Mechanical Science and Technology, vol. 25, no. 8, pp.1893-1904, 2011 |
|
|
A joint normalcy index to evaluate patients with gait pathologies in the functional aspects of joint mobility
Ki-Young Shin, Yong Hoon Rim, Youn Soo Kim, Hyo Shin Kim, Jae Woong Han, Chang Hyun Choi, Kyung Suk Lee, Joung Hwan Mun
The Journal of Mechanical Science and Technology, vol. 24, no. 9, pp.1901-1909, 2010 |
|
|
A novel six-degrees-of-freedom series-parallel manipulator
J. Gallardo-Alvarado*, R. Rodríguez-Castro, C. R. Aguilar-Nájera and L. Pérez-González
The Journal of Mechanical Science and Technology, vol. 26, no. 6, pp.1901-1909, 2012 |
|
|
Source identification of serial impacts in a plate based on pre-signal processing and time-frequency method
Jong-Ho Park, Yu-Sung Moon and Sang-Kwon Lee*
The Journal of Mechanical Science and Technology, vol. 25, no. 8, pp.1905-1913, 2011 |
|
|
On the fail-safe design of tendon-driven manipulators with redundant tendons
Jinn-Biau Sheu, Tyng Liu and Jyh-Jone Lee*
The Journal of Mechanical Science and Technology, vol. 26, no. 6, pp.1911-1920, 2012 |
|
|
An analytical solution for nonlinear dynamics of a viscoelastic beam-heavy mass system
Mergen H. Ghayesh*, Farbod Alijani and Mohammad A. Darabi
The Journal of Mechanical Science and Technology, vol. 25, no. 8, pp.1915-1923, 2011 |
|
|
Simultaneous two-axis vibration measurement of a nonmetallic cylinder by electromagnetic induction and metallic foil loops
Soon Woo Han, Jin Ki Kim and Yoon Young Kim*
The Journal of Mechanical Science and Technology, vol. 25, no. 8, pp.1925-1931, 2011 |
|
|
Dynamic response of a finite length euler-bernoulli beam on linear and nonlinear viscoelastic foundations to a concentrated moving force
Alkim Deniz Senalp, Aytac Arikoglu, Ibrahim Ozkol,Vedat Ziya Dogan
The Journal of Mechanical Science and Technology, vol. 24, no. 10, pp.1957-1961, 2010 |
|
|
Two-stage design process of a frame-panel land vehicle structure employing topology and cross section optimization
Hong Seok Lim, Yong Woo Kim, Man Hoi Koo, Hak In Gimm, Hong Hee Yoo
The Journal of Mechanical Science and Technology, vol. 24, no. 10, pp.1963-1967, 2010 |
|
|
Investigation of blade failure in a gas turbine
Yeon-Sun Choi,Kyu-Hwa Lee
The Journal of Mechanical Science and Technology, vol. 24, no. 10, pp.1969-1974, 2010 |
|
|
Analysis of water hammer in pipelines by partial fraction expansion of transfer function in frequency domain
Jun-Shin Lee, Bong-Ki Kim, Wook-Ryun Lee and Ki-Yong Oh
The Journal of Mechanical Science and Technology, vol. 24, no. 10, pp.1975-1980, 2010 |
|
|
Model-based fault detection and isolation in steer-by-wire vehicle using sliding mode observer
Jae Sung IM
The Journal of Mechanical Science and Technology, vol. 23, no. 8, pp.1991-1999, 2009 |
|
|
Sifting process of EMD and its application in rolling element bearing fault diagnosis
Hongbo Dong
The Journal of Mechanical Science and Technology, vol. 23, no. 8, pp.2000-2007, 2009 |
|
|
Free vibration analysis of functionally graded coupled circular plate with piezoelectric layers
S. Jafari Mehrabadi
The Journal of Mechanical Science and Technology, vol. 23, no. 8, pp.2008-2021, 2009 |
|
|
Quasi-linearization of non-linear systems under random vibration by probabilistic method
Sin-Young Lee
The Journal of Mechanical Science and Technology, vol. 23, no. 8, pp.2022-2029, 2009 |
|
|
A path tracking control algorithm for underwater mining vehicles
Sup Hong
The Journal of Mechanical Science and Technology, vol. 23, no. 8, pp.2030-2037, 2009 |
|
|
Vibration suppression in ultrasonic machining described by non-linear differential equations
M. M. Kamel
The Journal of Mechanical Science and Technology, vol. 23, no. 8, pp.2038-2050, 2009 |
|
|
Modal analysis of a multi-blade system undergoing rotational motion
Ha Seong Lim
The Journal of Mechanical Science and Technology, vol. 23, no. 8, pp.2051-2058, 2009 |
|
|
Sensorless and modeless estimation of external force using time delay estimation: application to impedance control
Jae Won Jeong*, Pyung Hun Chang and Kyung Bin Park
The Journal of Mechanical Science and Technology, vol. 25, no. 8, pp.2051-2059, 2011 |
|
|
Development of an aircraft worst case flutter prediction with Mach variation using robust stability analysis
Chan Hoon Chung
The Journal of Mechanical Science and Technology, vol. 23, no. 8, pp.2059-2071, 2009 |
|
|
A modified model reference adaptive control with application to MEMS gyroscope
Mehran Zareh* and Sahel Soheili
The Journal of Mechanical Science and Technology, vol. 25, no. 8, pp.2061-2066, 2011 |
|
|
Vision guided dual arms robotic system with DSP and FPGA integrated system structure
Shiuh-Jer Huang* and Jian-Cheng Huang
The Journal of Mechanical Science and Technology, vol. 25, no. 8, pp.2067-2076, 2011 |
|
|
Vibration of functionally graded cylindrical shells based on different shear deformation shell theories with ring support under various boundary conditions
M. M. Najafizadeh
The Journal of Mechanical Science and Technology, vol. 23, no. 8, pp.2072-2084, 2009 |
|
|
Dynamic self-collision detection and prevention for 2-DOF robot arms using interval-based analysis
Hao Fang*, Jie Chen and Lihua Dou
The Journal of Mechanical Science and Technology, vol. 25, no. 8, pp.2077-2087, 2011 |
|
|
Application of nonlinear integer programming for vibration reduction optimum design of ship structure
Yong-Mo Kong
The Journal of Mechanical Science and Technology, vol. 23, no. 8, pp.2085-2096, 2009 |
|
|
Robustly stable bilateral teleoperation under time-varying delays and data losses: an energy-bounding approach
Changhoon Seo, Jong-Phil Kim, Jaeha Kim, Hyo-Sung Ahn and Jeha Ryu*
The Journal of Mechanical Science and Technology, vol. 25, no. 8, pp.2089-2100, 2011 |
|
|
Collision-free motion coordination of heterogeneous robots
Nak Yong Ko
The Journal of Mechanical Science and Technology, vol. 22, no. 11, pp.2090-2098, 2008 |
|
|
Dual stage and an image processing-based method for sight stabilization
Joon Lyou
The Journal of Mechanical Science and Technology, vol. 23, no. 8, pp.2097-2106, 2009 |
|
|
Ellipse-based leg-trajectory generation for galloping quadruped robots
Kyeong Yong Kim
The Journal of Mechanical Science and Technology, vol. 22, no. 11, pp.2099-2106, 2008 |
|
|
Diagnosis and control of machine induced noise and vibration in steel construction
Wei-Yu Lu
The Journal of Mechanical Science and Technology, vol. 22, no. 11, pp.2107-2121, 2008 |
|
|
Geometrically nonlinear vibration analysis of piezoelectrically actuated FGM plate with an initial large deformation
Farzad Ebrahimi
The Journal of Mechanical Science and Technology, vol. 23, no. 8, pp.2107-2124, 2009 |
|
|
Application of non-stationary signal characteristics using wavelet packet transformation
Sang-Gil Park
The Journal of Mechanical Science and Technology, vol. 22, no. 11, pp.2122-2133, 2008 |
|
|
Analysis of the nonlinear behavior of gear pairs considering hydrodynamic lubrication and sliding friction
Cheon Gill-Jeong
The Journal of Mechanical Science and Technology, vol. 23, no. 8, pp.2125-2137, 2009 |
|
|
An analytical investigation into the Nusselt number and entropy generation rate of film condensation on a horizontal plate
Tong Bou Chang
The Journal of Mechanical Science and Technology, vol. 22, no. 11, pp.2134-2141, 2008 |
|
|
Research on transmission paths of a coupled beam-cylindrical shell system by power flow analysis
G. P. Feng
The Journal of Mechanical Science and Technology, vol. 23, no. 8, pp.2138-2148, 2009 |
|
|
Lyapunov theory based robust control of complicated nonlinear mechanical systems with uncertainty
Hyun Cheol Cho
The Journal of Mechanical Science and Technology, vol. 22, no. 11, pp.2142-2150, 2008 |
|
|
Fatigue life estimation of MD36 and MD523 bogies based on damage accumulation and random fatigue theory
Davood Younesian
The Journal of Mechanical Science and Technology, vol. 23, no. 8, pp.2149-2156, 2009 |
|
|
Fault diagnosis of partial rub and looseness in rotating machinery using Hilbert-Huang transform
Seung-Mock Lee
The Journal of Mechanical Science and Technology, vol. 22, no. 11, pp.2151-2162, 2008 |
|
|
Seven-bar mechanical press with hybrid-driven mechanism for deep drawing;
Hui Li* , Yuping Zhang
The Journal of Mechanical Science and Technology, vol. 24, no. 11, pp.2153-2160, 2010 |
|
|
FSDPT based study for vibration analysis of piezoelectric coupled annular FGM plate
Farzad Ebrahimi
The Journal of Mechanical Science and Technology, vol. 23, no. 8, pp.2157-2168, 2009 |
|
|
Seven-bar mechanical press with hybrid-driven mechanism for deep drawing; Part 2: Dynamic modeling and simulation
Hui Li* , Yuping Zhang
The Journal of Mechanical Science and Technology, vol. 24, no. 11, pp.2161-2167, 2010 |
|
|
Tolerance effects on natural frequencies of multibody systems undergoing constant rotational motion
Seung Man Eom
The Journal of Mechanical Science and Technology, vol. 22, no. 11, pp.2163-2170, 2008 |
|
|
Theoretical and experimental investigation of the effects of an irregular-pitch cutter on vibration in face-milling
Hui Li*, Haiqi Zheng, Liwei Tang
The Journal of Mechanical Science and Technology, vol. 24, no. 11, pp.2169-2174, 2010 |
|
|
Measurement of the normal acoustic impedance using beamforming method
Jong Cheon Sun
The Journal of Mechanical Science and Technology, vol. 23, no. 8, pp.2169-2178, 2009 |
|
|
Development of a tilting system for electric multiple unit to speed up on conventional lines
Sung Il Seo
The Journal of Mechanical Science and Technology, vol. 22, no. 11, pp.2171-2179, 2008 |
|
|
Design of a vibrating MEMS gyroscope considering design variable uncertainties
Yong Woo Kim, Hong Hee Yoo*
The Journal of Mechanical Science and Technology, vol. 24, no. 11, pp.2175-2180, 2010 |
|
|
Dynamic response characteristics of seismic isolation systems for building structures
Beom-Soo Kang
The Journal of Mechanical Science and Technology, vol. 23, no. 8, pp.2179-2192, 2009 |
|
|
Dynamic analysis of a train-bridge system under multi-support seismic excitations
Nan Zhang*, He Xia, Guido De Roeck
The Journal of Mechanical Science and Technology, vol. 24, no. 11, pp.2181-2188, 2010 |
|
|
Numerical analysis method to estimate thermal deformation of a ventilated disc for automotives
Won Sun Chung, Sung Pil Jung, Tae Won Park*
The Journal of Mechanical Science and Technology, vol. 24, no. 11, pp.2189-2195, 2010 |
|
|
Effects of nearfield waves and phase information on the vibration analysis of curved beams
Cheol-Ho Jeong
The Journal of Mechanical Science and Technology, vol. 23, no. 8, pp.2193-2205, 2009 |
|
|
Improvements for reduction of the brake squeal noise at Seoul metro rolling stock on tracks
Seong Keol Kim
The Journal of Mechanical Science and Technology, vol. 23, no. 8, pp.2206-2214, 2009 |
|
|
A study on the efficiency improvement of a passive oil damper using an MR accumulator
Young-Won Yun, Seong-Min Lee, Myeoung-Kwan Park*
The Journal of Mechanical Science and Technology, vol. 24, no. 11, pp.2297-2305, 2010 |
|
|
Design of safety mechanism for an industrial manipulator based on passive compliance
Hwi-Su Kim, Jung-Jun Park, Jae-Bok Song*, Jin-Ho Kyung
The Journal of Mechanical Science and Technology, vol. 24, no. 11, pp.2307-2313, 2010 |
|
|
Adaptive neural controller for visual servoing of robot manipulators with camera-in-hand configuration
Jungmin Kim, Naveen Kumar*, Vikas Panwar, Jin-Hwan Borm and Jangbom Chai
The Journal of Mechanical Science and Technology, vol. 26, no. 8, pp.2313-2323, 2012 |
|
|
Compliant actuation of parallel-type variable stiffness actuator based on antagonistic actuation
Ki-Hoon Nam, Byeong-Sang Kim, Jae-Bok Song*
The Journal of Mechanical Science and Technology, vol. 24, no. 11, pp.2315-2321, 2010 |
|
|
Design of an optimal idle speed controller for a turbocharged diesel engine using fuzzy logic method
Kamyar Nikzadfar*, Alireza Noorpoor and Amir. H. Shamekhi
The Journal of Mechanical Science and Technology, vol. 26, no. 8, pp.2325-2336, 2012 |
|
|
Performance limit of a passive vertical isolator using a negative stiffness mechanism
Hyeong-Joon Ahn
The Journal of Mechanical Science and Technology, vol. 22, no. 12, pp.2357-2364, 2008 |
|
|
Transverse Shear and Rotary Inertia Effects on the Stability Analysis of Functionally Graded Shells under Combined Static and Periodic Axial Loadings
F. Ebrahimi*, H. Sepiani
The Journal of Mechanical Science and Technology, vol. 24, no. 12, pp.2359-2366, 2010 |
|
|
Hybrid neural network bushing model for vehicle dynamics simulation
Jeong-Hyun Sohn
The Journal of Mechanical Science and Technology, vol. 22, no. 12, pp.2365-2374, 2008 |
|
|
An Implementation of Risk-Based Inspection for Elevator Maintenance
Seung-Tae Park, Bo-Suk Yang*
The Journal of Mechanical Science and Technology, vol. 24, no. 12, pp.2367-2376, 2010 |
|
|
Analysis of fluid induced vibration of cryogenic pipes in consideration of the cooling effect
Bong Soo Kim
The Journal of Mechanical Science and Technology, vol. 22, no. 12, pp.2375-2385, 2008 |
|
|
Identification of Modal Parameters from Ambient Vibration Data Using Eigensystem Realization Algorithm with Correlation Technique
Dar-Yun Chiang, Chang-Sheng Lin*
The Journal of Mechanical Science and Technology, vol. 24, no. 12, pp.2377-2382, 2010 |
|
|
Noise reduction of a high-speed printing system using optimized gears based on Taguchi’s method
Hak-Kyum Kim, Jin-Young Jeon, Ji-Youp Park, Seongho Yoon, Sungsoo Na*
The Journal of Mechanical Science and Technology, vol. 24, no. 12, pp.2383-2393, 2010 |
|
|
Beam stability on an elastic foundation subjected to distributed follower force
Jae-On Kim
The Journal of Mechanical Science and Technology, vol. 22, no. 12, pp.2386-2392, 2008 |
|
|
Optimization of helix angle for helical gear system
Ju Seok Kang
The Journal of Mechanical Science and Technology, vol. 22, no. 12, pp.2393-2402, 2008 |
|
|
Hilbert-Huang Transform (HHT) transient analysis of composite panel undergoing high-velocity impact
Seung Kyu Lee, Yong Woo Kim, Man Hoi Koo, Hak In Gimm, Hong Hee Yoo*
The Journal of Mechanical Science and Technology, vol. 24, no. 12, pp.2395-2400, 2010 |
|
|
Identification of acoustic wave propagation in a duct line and its application to detection of impact source location based on signal processing
Yong Woo Shin, Min Soo Kim, Sang Kwon Lee*
The Journal of Mechanical Science and Technology, vol. 24, no. 12, pp.2401-2411, 2010 |
|
|
Receding horizon tracking control for wheeled mobile robots with time-delay
Yu Gao
The Journal of Mechanical Science and Technology, vol. 22, no. 12, pp.2403-2416, 2008 |
|
|
Vibro-acoustic analysis of free piston engine structure using finite element and boundary element methods
A. A. Nuraini*, A. K. A. Mohd Ihsan, M. J. M. Nor and N. Jamaluddin
The Journal of Mechanical Science and Technology, vol. 26, no. 8, pp.2405-2411, 2012 |
|
|
Constrained control of hot air blower system under output delay using globally stable performance-based anti-windup approach
Muhammad Rehan1, Abrar Ahmed2, Naeem Iqbal2 and Keum-Shik Hong1,3,*
The Journal of Mechanical Science and Technology, vol. 24, no. 12, pp.2413-2420, 2010 |
|
|
Intelligent fault diagnosis method for marine diesel engines using instantaneous angular speed
Zhixiong Li, Xinping Yan*, Chengqing Yuan and Zhongxiao Peng
The Journal of Mechanical Science and Technology, vol. 26, no. 8, pp.2413-2423, 2012 |
|
|
Improved information fusion approach based on D-S evidence theory
Rui Sun
The Journal of Mechanical Science and Technology, vol. 22, no. 12, pp.2417-2425, 2008 |
|
|
A probabilistic description scheme for rotating machinery health evaluation
Qiang Miao*, Dong Wang, Michael Pecht
The Journal of Mechanical Science and Technology, vol. 24, no. 12, pp.2421-2430, 2010 |
|
|
Stability analysis of an inverted three-lobe pressure dam bearing
N. P. Mehta, S. S. Rattan, Gian Bhushan and N. K. Batra*
The Journal of Mechanical Science and Technology, vol. 26, no. 8, pp.2425-2430, 2012 |
|
|
Automatic micropart assembly of 3-Dimensional structure by vision based control
Lidai Wang
The Journal of Mechanical Science and Technology, vol. 22, no. 12, pp.2426-2435, 2008 |
|
|
Detection of rubbing location in rotor system by super-harmonic responses
Hongliang Yao*, Qingkai Han, Lingxuan Li and Bangchun Wen
The Journal of Mechanical Science and Technology, vol. 26, no. 8, pp.2431-2437, 2012 |
|
|
Frequency-domain computation of inflow broadband noise due to interaction of a rectilinear cascade of flat plates with incident turbulence
Dingbing Wei, Cheolung Cheong*
The Journal of Mechanical Science and Technology, vol. 24, no. 12, pp.2431-2440, 2010 |
|
|
Dynamics modeling and simulation of a new nine-bar press with hybrid-driven mechanism
Hui Li
The Journal of Mechanical Science and Technology, vol. 22, no. 12, pp.2436-2444, 2008 |
|
|
Dynamics of universal joints, its failures and some propositions for practically improving its performance and life expectancy
Farzad Vesali, Mohammad Ali Rezvani* and Mohammad Kashfi
The Journal of Mechanical Science and Technology, vol. 26, no. 8, pp.2439-2449, 2012 |
|
|
Robust motion control of a clamp-cylinder for energy-saving injection moulding machines
Seung Ho Cho
The Journal of Mechanical Science and Technology, vol. 22, no. 12, pp.2445-2453, 2008 |
|
|
An analytical model to investigate skidding in rolling element bearings during acceleration
Wenbing Tu, Yimin Shao* and Chris K. Mechefske
The Journal of Mechanical Science and Technology, vol. 26, no. 8, pp.2451-2458, 2012 |
|
|
Semi-active vibration control of an eleven degrees of freedom suspension system using neuro inverse model of magnetorheological dampers
Seiyed Hamid Zareh*, Meisam Abbasi, Hadi Mahdavi and Kambiz Ghaemi Osgouie
The Journal of Mechanical Science and Technology, vol. 26, no. 8, pp.2459-2467, 2012 |
|
|
Robust controller for an autonomous vehicle with look-ahead and look-down information
Ju Yong Choi*
The Journal of Mechanical Science and Technology, vol. 25, no. 10, pp.2467-2474, 2011 |
|
|
Effects of the trench geometry on vibration mitigation level in high-speed railway tracks
Davood Younesian* and Mehran Sadri
The Journal of Mechanical Science and Technology, vol. 26, no. 8, pp.2469-2476, 2012 |
|
|
Generation and propagation of elastic waves on a pipe by open-shell transducers
Daeseung Kim and Jin Oh Kim*
The Journal of Mechanical Science and Technology, vol. 25, no. 10, pp.2475-2484, 2011 |
|
|
Experimental identification of fluid-induced force in labyrinth seals
Wan Fu Zhang*, Jian Gang Yang, Hao Cao and Dan Sun
The Journal of Mechanical Science and Technology, vol. 25, no. 10, pp.2485-2494, 2011 |
|
|
A semi-analytical/FEM model for predicting ground vibrations induced by high-speed train through continuous girder bridge
Yanmei Cao*, He Xia and Zhenghui Li
The Journal of Mechanical Science and Technology, vol. 26, no. 8, pp.2485-2496, 2012 |
|
|
Development of a new analytical tool to design hierarchical truss beams for natural frequency
Norodin Fazli, Seyed Mohammd Bagher Malaek, Ali Abedian* and Hessamodin Teimouri
The Journal of Mechanical Science and Technology, vol. 25, no. 10, pp.2495-2503, 2011 |
|
|
On the kinematic geometry of relative screw motions
Rashad A. Abdel-Baky* and Reem A. Al-Ghefari
The Journal of Mechanical Science and Technology, vol. 26, no. 8, pp.2497-2503, 2012 |
|
|
Mechanism and characteristic of rain-induced vibration on high-voltage transmission line
Chao Zhou*, Yibing Liu and Xiaoming Rui
The Journal of Mechanical Science and Technology, vol. 26, no. 8, pp.2505-2510, 2012 |
|
|
Dynamic responses of composite H-beams with different elastic couplings
Sung-Kyun Kim, Kune-Woo Lee and Ohseop Song*
The Journal of Mechanical Science and Technology, vol. 25, no. 10, pp.2505-2517, 2011 |
|
|
Dynamic analysis of smart composite beams by using the frequency-domain spectral element method
Ilwook Park and Usik Lee
The Journal of Mechanical Science and Technology, vol. 26, no. 8, pp.2511-2521, 2012 |
|
|
Noise and vibration on the bogie of a mass rapid train
Hsiu-Ying Hwang* and Jia-Shiun Chen
The Journal of Mechanical Science and Technology, vol. 25, no. 10, pp.2519-2528, 2011 |
|
|
Parameter identification of Bouc-Wen model for MR fluid dampers using adaptive charged system search optimization
S. Talatahari, A. Kaveh* and N. Mohajer Rahbari
The Journal of Mechanical Science and Technology, vol. 26, no. 8, pp.2523-2534, 2012 |
|
|
Numerical study of hydrofoil geometry effect on cavitating flow
Hyosung Sun*
The Journal of Mechanical Science and Technology, vol. 26, no. 8, pp.2535-2545, 2012 |
|
|
Multi-source data fusion based small sample prediction of gear random reliability
Tao Chen* and Wei Sun
The Journal of Mechanical Science and Technology, vol. 26, no. 8, pp.2547-2555, 2012 |
|
|
Structural optimization of a Cu(In,Ga)Se2 thin film solar cell using numerical simulation and design of experiment techniques
Ilwoo Seok*, Hyun-Jung Kim and Gyungsu Byun
The Journal of Mechanical Science and Technology, vol. 26, no. 8, pp.2557-2563, 2012 |
|
|
The effect of CNT volume fraction on the magneto-thermo-electro-mechanical behavior of smart nanocomposite cylinder
A. Ghorbanpour Arani*, M. Rahnama Mobarakeh, Sh. Shams and M. Mohammadimehr
The Journal of Mechanical Science and Technology, vol. 26, no. 8, pp.2565-2572, 2012 |
|
|
Numerical study on moving train parameter identification system through a simply supported bridge
Yi Wang* and Weilian Qu
The Journal of Mechanical Science and Technology, vol. 26, no. 9, pp.2641-2648, 2012 |
|
|
Intelligent fault diagnosis of rolling bearing based on kernel neighborhood rough sets and statistical features
Xiaoran Zhu*, Youyun Zhang and Yongsheng Zhu
The Journal of Mechanical Science and Technology, vol. 26, no. 9, pp.2649-2657, 2012 |
|
|
An efficient method to predict steady-state vibration of three-dimensional piping system conveying a pulsating fluid
Seong-Hyeon Lee and Weui-Bong Jeong*
The Journal of Mechanical Science and Technology, vol. 26, no. 9, pp.2659-2667, 2012 |
|
|
Rotor dynamics analysis and experiment study of the flywheel spin test system
Chang-Liang Tang*, Xing-Jian Dai, Xiao-Zhang Zhang and Lei Jiang
The Journal of Mechanical Science and Technology, vol. 26, no. 9, pp.2669-2677, 2012 |
|
|
Study of optimization of the barrel cam in a paper-cup-forming machine
Wook Hyeon Kim and Tae Won Park*
The Journal of Mechanical Science and Technology, vol. 26, no. 9, pp.2679-2684, 2012 |
|
|
Free vibration analysis of orthotropic plates with variable thickness resting on non-uniform elastic foundation by element free Galerkin method
Ehsan Bahmyari* and Ahmad Rahbar-Ranji
The Journal of Mechanical Science and Technology, vol. 26, no. 9, pp.2685-2694, 2012 |
|
|
Solving inertial wrench of parallel manipulators using CAD variation geometry
Yi Lu*, Yang Lu, Nijia Ye, Wang Peng and Ho Bo
The Journal of Mechanical Science and Technology, vol. 26, no. 9, pp.2695-2703, 2012 |
|
|
A new method for polygon effect analysis of saw chain
Shaoqing Shi, Xiongqi Peng*, Ning Zhao and Chunwen Zhang
The Journal of Mechanical Science and Technology, vol. 26, no. 9, pp.2705-2710, 2012 |
|
|
Application of cepstrum and neural network to bearing fault detection
Yean-Ren Hwang, Kuo-Kuang Jen, Yu-Ta Shen
The Journal of Mechanical Science and Technology, vol. 23, no. 10, pp.2730-2737, 2009 |
|
|
Bearing fault diagnosis based on amplitude and phase map of Hermitian wavelet transform
Hui Li*, Lihui Fu and Haiqi Zheng
The Journal of Mechanical Science and Technology, vol. 25, no. 11, pp.2731-2740, 2011 |
|
|
Development of frequency weighting function for Asian (Korean) people in vertical whole-body vibration; in comparison with ISO 2631-1
Kun-Woo Kim, Min-Seok Kim, Wan-Suk Yoo
The Journal of Mechanical Science and Technology, vol. 23, no. 10, pp.2738-2746, 2009 |
|
|
Enhanced friction model for high-speed right-angle gear dynamics
Zhiheng Feng
The Journal of Mechanical Science and Technology, vol. 25, no. 11, pp.2741-2753, 2011 |
|
|
Steering control algorithm for efficient drive of a mobile robot with steerable omni-directional wheels
Jae-Bok Song, Kyung-Seok Byun
The Journal of Mechanical Science and Technology, vol. 23, no. 10, pp.2747-2756, 2009 |
|
|
Developing the logic for evaluating the indoor noise of a naval vessel using a back-propagation neural network
Hyun-Soo Hong, Sang-Ryul Shim and Hyung-Suk Han*
The Journal of Mechanical Science and Technology, vol. 25, no. 11, pp.2755-2762, 2011 |
|
|
Anti-sway system with image sensor for container cranes
Hideki Kawai, Young Bok Kim,Yong Woon Choi
The Journal of Mechanical Science and Technology, vol. 23, no. 10, pp.2757-2765, 2009 |
|
|
Piezoelectric electro-active paper (EAPap) speaker
Jaehwan Kim, Gyu-Young Yun, Jung-Hwan Kim, Jinyi Lee and Joo-Hyung Kim*
The Journal of Mechanical Science and Technology, vol. 25, no. 11, pp.2763-2768, 2011 |
|
|
Measurement and correlation of high frequency behaviors of a very flexible beam undergoing large deformation
Jae Wook Lee, Hyun Woo Kim, Hi Chun Ku, Wan Suk Yoo
The Journal of Mechanical Science and Technology, vol. 23, no. 10, pp.2766-2775, 2009 |
|
|
Vibration localization of a mistuned rotating multi-packet blade system undergoing external cyclic harmonic force
Seung Min Kwon and Hong Hee Yoo*
The Journal of Mechanical Science and Technology, vol. 25, no. 11, pp.2769-2774, 2011 |
|
|
The development of a visual system for the detection of obstructions for visually impaired people
Mitsuhiro Okayasu
The Journal of Mechanical Science and Technology, vol. 23, no. 10, pp.2776-2779, 2009 |
|
|
Gear fault detection and diagnosis under speed-up condition based on order cepstrum and radial basis function neural network
Hui Li,Yuping Zhang, Haiqi Zheng
The Journal of Mechanical Science and Technology, vol. 23, no. 10, pp.2780-2789, 2009 |
|
|
A study on the critical speed of worn wheel profile using a scale model
Hyun-Moo Hur, Joon-Hyuk Park, Won-Hee You, Tae-Won Park
The Journal of Mechanical Science and Technology, vol. 23, no. 10, pp.2790-2800, 2009 |
|
|
Analysis of the HVAC system’s sound quality using the design of experiments
Sang-Gil Park, Hyun-Jin Sim, Ji-Hyun Yoon, Jae-Eun Jeong
The Journal of Mechanical Science and Technology, vol. 23, no. 10, pp.2801-2806, 2009 |
|
|
Backward-motion control of a mobile robot with n passive off-hooked trailers
Woojin Chung*, Myoungkuk Park, Kwanghyun Yoo, Jae Il Roh and Jongsuk Choi
The Journal of Mechanical Science and Technology, vol. 25, no. 11, pp.2895-2905, 2011 |
|
|
dead reckoning localization system for mobile robots using inertial sensors and wheel revolution encoding
Bong-Su Cho, Woo-sung Moon, Woo-Jin Seo and Kwang-Ryul Baek*
The Journal of Mechanical Science and Technology, vol. 25, no. 11, pp.2907-2917, 2011 |
|
|
A 2-dof gravity compensator with bevel gears
Changhyun Cho, Woosub Lee, Jinyi Lee and Sungchul Kang*
The Journal of Mechanical Science and Technology, vol. 26, no. 9, pp.2913-2919, 2012 |
|
|
Control of a 2-DOF omnidirectional mobile inverted pendulum
Tuan Dinh Viet, Phuc Thinh Doan, Hoang Giang, Hak Kyeong Kim and Sang Bong Kim*
The Journal of Mechanical Science and Technology, vol. 26, no. 9, pp.2921-2928, 2012 |
|
|
Reduction of deadweight pendulum motion and its conformation by using a build-up system
Yon-Kyu Park/Dae-Im Kang/Jong-Ho Kim/Min-Seok Kim
The Journal of Mechanical Science and Technology, vol. 23, no. 11, pp.2956-2963, 2009 |
|
|
Crack identification in a rotor with an open crack
Guang Ming Dong/Jin Chen
The Journal of Mechanical Science and Technology, vol. 23, no. 11, pp.2964-2972, 2009 |
|
|
Investigation of a nonlinear dynamic hydraulic system model through the energy analysis approach
Hamed Hossein Afshari/Mostafa Ehramianpour/Morteza Mohammadi
The Journal of Mechanical Science and Technology, vol. 23, no. 11, pp.2973-2979, 2009 |
|
|
NVH analysis and improvement of a vehicle body structure using DOE method
Shahram Azadi/Mohammad Azadi/Farshad Zahedi
The Journal of Mechanical Science and Technology, vol. 23, no. 11, pp.2980-2989, 2009 |
|
|
Effects of string tension and impact location on tennis playing
Linlin Li/Seung Han Yang/Chang-Soon Hwang/Young Suk Kim
The Journal of Mechanical Science and Technology, vol. 23, no. 11, pp.2990-2997, 2009 |
|
|
Effect of moisture absorption on damping and dynamic stiffness of carbon fiber/epoxy composites
Behzad Ahmed Zai/M. K. Park/H. S. Choi/Hassan Mehboob/Rashid Ali
The Journal of Mechanical Science and Technology, vol. 23, no. 11, pp.2998-3004, 2009 |
|
|
A robust sliding mode controller design for a ball screw table driven by an air motor
Yu-Ta Shen/Yean-Ren Hwang/Chia-Sheng Cheng
The Journal of Mechanical Science and Technology, vol. 23, no. 11, pp.3005-3012, 2009 |
|
|
Modeling and analysis of rotating plates by using self-sensing active
Zhengchao Xie, Pak Kin Wong and Ian Ian Chong
The Journal of Mechanical Science and Technology, vol. 26, no. 10, pp.3009-3016, 2012 |
|
|
Response of the beams on random Pasternak foundations subjected to harmonic moving loads
Davood Younesian/Mohammad Hossein Kargarnovin
The Journal of Mechanical Science and Technology, vol. 23, no. 11, pp.3013-3023, 2009 |
|
|
Alternative method for identification of the dynamic properties of bolted joints
Tieneng Guo, Ling Li, Ligang Cai and Yongsheng Zhao
The Journal of Mechanical Science and Technology, vol. 26, no. 10, pp.3017-3027, 2012 |
|
|
Modeling and experiments on eddy current damping caused by a permanent magnet in a conductive tube
Jae-Sung Bae/Jai-Hyuk Hwang/Jung-Sam Park/Dong-Gi Kwag
The Journal of Mechanical Science and Technology, vol. 23, no. 11, pp.3024-3035, 2009 |
|
|
Road profile estimation using wavelet neural network and 7-DOF vehicle dynamic systems
Ali Solhmirzaei*, Shahram Azadi and Reza Kazemi
The Journal of Mechanical Science and Technology, vol. 26, no. 10, pp.3029-3036, 2012 |
|
|
Effect of taper tension profile on the telescoping in a winding process of high speed roll to roll printing systems
Changwoo Lee/Hyunkyoo Kang/Hojoon Kim/Keehyun Shin
The Journal of Mechanical Science and Technology, vol. 23, no. 11, pp.3036-3048, 2009 |
|
|
Identification of the beat characteristics and damping ratios of the Hwacheon World Peace Bell using wavelet transform
Sung Yong Park/Won Tae Jeong/Seockhyun Kim/Yeon June Kang
The Journal of Mechanical Science and Technology, vol. 23, no. 11, pp.3049-3058, 2009 |
|
|
Precision position control of servo systems using adaptive back-stepping and recurrent fuzzy neural networks
Han Me Kim/Seong Ik Han/Jong Shik Kim
The Journal of Mechanical Science and Technology, vol. 23, no. 11, pp.3059-3070, 2009 |
|
|
Adaptive control of an axially moving system
Quang Hieu Ngo/Keum-Shik Hong/Il Hyo Jung
The Journal of Mechanical Science and Technology, vol. 23, no. 11, pp.3071-3078, 2009 |
|
|
A new approach to motion control of torque-constrained manipulators by using time-scaling of reference trajectories
Javier Moreno-Valenzuela/Ernesto Orozco-Manríquez
The Journal of Mechanical Science and Technology, vol. 23, no. 12, pp.3221-3231, 2009 |
|
|
Dynamic analysis and fuzzy logic control for the vane-type air motor
Yean-Ren Hwang/Yu-Ta Shen/Min-Shin Chen
The Journal of Mechanical Science and Technology, vol. 23, no. 12, pp.3232-3238, 2009 |
|
|
An analytical guidance law of planetary landing mission by minimizing the control effort expenditure
Hamed Hossein Afshari/Alireza Basohbat Novinzadeh/Jafar Roshanian
The Journal of Mechanical Science and Technology, vol. 23, no. 12, pp.3239-3244, 2009 |
|
|
An analytical guidance law of planetary landing mission by minimizing the control effort expenditure
Hamed Hossein Afshari/Alireza Basohbat Novinzadeh/Jafar Roshanian
The Journal of Mechanical Science and Technology, vol. 23, no. 12, pp.3239-3244, 2009 |
|
|
Analysis of the root causes of refrigerant-induced noise in refrigerators
Hyung Suk Han/Weui Bong Jeong/Min Seong Kim/Tae Hoon Kim
The Journal of Mechanical Science and Technology, vol. 23, no. 12, pp.3245-3256, 2009 |
|
|
Dynamic interaction analysis of a LIM train and elevated bridge system
H. Xia/W. W. Guo/C. Y. Xia/Y.-L. Pi/M. A. Bradford
The Journal of Mechanical Science and Technology, vol. 23, no. 12, pp.3257-3270, 2009 |
|
|
Controlled canard configuration study for a solid rocket motor based unmanned air vehicle
Xie Kan/Liu Yu/Xin Jianren
The Journal of Mechanical Science and Technology, vol. 23, no. 12, pp.3271-3280, 2009 |
|
|
Analysis of tiltrotor whirl flutter in time and frequency domain
Taeseong Kim/SangJoon Shin/Taehyoun Kim
The Journal of Mechanical Science and Technology, vol. 23, no. 12, pp.3281-3291, 2009 |
|
|
Rolling element bearing fault detection using an improved combination of Hilbert and Wavelet transforms
Dong Wang/Qiang Miao/Xianfeng Fan/Hong-Zhong Huang
The Journal of Mechanical Science and Technology, vol. 23, no. 12, pp.3292-3301, 2009 |
|
|
nonlinear model of flow-structure interaction between steam leakage through labyrinth seal and the whirling rotor
W. Z. Wang/ Y. Z. Liu/G. Meng/P. N. Jiang
The Journal of Mechanical Science and Technology, vol. 23, no. 12, pp.3302-3315, 2009 |
|
|
study on the design of a child seat system with mutipoint restraints to enhance safety
Dong-Woon Park/Wan-Suk Yoo
The Journal of Mechanical Science and Technology, vol. 23, no. 12, pp.3316-3322, 2009 |
|
|
Development of high speed computation algorithm for transient analysis of rectangular plates
M. S. Choi/D. J. Jang/Y. B. Kim/J. S. Jang/D. H. Moon
The Journal of Mechanical Science and Technology, vol. 23, no. 12, pp.3323-3331, 2009 |
|
|
Skew control of a quay container crane
Quang Hieu Ngo/Keum-Shik Hong
The Journal of Mechanical Science and Technology, vol. 23, no. 12, pp.3332-3339, 2009 |
|
|
Analysis on perceptual sensitivity to head-related impulse responses in the median plane
Sungmok Hwang/Youngjin Park/Youn-sik Park
The Journal of Mechanical Science and Technology, vol. 23, no. 12, pp.3340-3348, 2009 |
|
|
|
|
|
 |
|
|
|
|
| |
|
|
| |
|
JMST Editorial Office: #702 KSTC New Bldg, 22 7-gil, Teheran-ro, Gangnam-gu, Seoul 06130, Korea
TEL: +82-2-501-3605, E-mail: editorial@j-mst.org |
JMST Production Office: #702 KSTC New Bldg, 22 7-gil, Teheran-ro, Gangnam-gu, Seoul 06130, Korea
TEL: +82-2-501-6056, FAX: +82-2-501-3649, E-mail: editorial@j-mst.org |
|
| |
|
|
