Published Papers
     Search Papers (Springer,
   After 2008)
     Search Papers (Dbpia,
   Until 2007)
     Search Papers (JMST
   own data base)
       - Classification By Year   
       - Classification By Topic
     Special Issues
   
           
   
 
 
Subject Keyword Abstract Author
 
 
Categories
Materials and Design Engineering
Dynamic propagation of a finite eccentric crack in a functionally graded piezoelectric ceramic strip
Jeong Woo Shin
The Journal of Mechanical Science and Technology, vol. 23, no. 1, pp.1-7, 2009
Effect of postpeak tension-softening behavior on the fracture properties of 2-D carbon fiber reinforced carbon composite
Yonjig Kim
The Journal of Mechanical Science and Technology, vol. 23, no. 1, pp.8-13, 2009
Compressive characteristics of WBK core depending upon the specimen size
Insu Jeon
The Journal of Mechanical Science and Technology, vol. 23, no. 1, pp.14-18, 2009
Analysis of the impact responses in a degenerated spinal motion segment FE model
YoungEun Kim
The Journal of Mechanical Science and Technology, vol. 23, no. 1, pp.19-25, 2009
Effect of shoulder geometry on residual stress and fatigue properties of AA6082 fsw joints
M. De Giorgi
The Journal of Mechanical Science and Technology, vol. 23, no. 1, pp.26-35, 2009
Bone density aspects in the biomechanical behavior of ALIF using cylindrical cages and PSF
Young Kim
The Journal of Mechanical Science and Technology, vol. 23, no. 1, pp.36-44, 2009
A new approach for the simulation of cementitious materials
Wei Guo Yang* and Hong Jun Xiang
The Journal of Mechanical Science and Technology, vol. 26, no. 1, pp.45-51, 2012
Piezoelectric hollow cylinder with thermal gradient
M. Saadatfar
The Journal of Mechanical Science and Technology, vol. 23, no. 1, pp.45-53, 2009
Computer-aided hybrid time reversal process for structural health monitoring
Yongju Jun and Usik Lee*
The Journal of Mechanical Science and Technology, vol. 26, no. 1, pp.53-61, 2012
Evaluation of elastic modulus for unidirectionally aligned short fiber composites
Lee Ku Kwac
The Journal of Mechanical Science and Technology, vol. 23, no. 1, pp.54-63, 2009
Fatigue behavior of an austenitic steel of 300-series under non-zero mean loading
S. M. Humayun Kabir and Tae-in Yeo*
The Journal of Mechanical Science and Technology, vol. 26, no. 1, pp.63-71, 2012
Asymmetric loading of erector spinae muscles during sagittally symmetric lifting
Joung H. Mun
The Journal of Mechanical Science and Technology, vol. 23, no. 1, pp.64-74, 2009
Mechanical behavior and numerical analysis of corrugated wire mesh laminates
Jeongho Choi*, Krishna Shankar and Murat Tahtali
The Journal of Mechanical Science and Technology, vol. 26, no. 1, pp.73-80, 2012
Conductivity of carbon nanofiber/polypyrrole conducting nanocomposites
Cheol Kim
The Journal of Mechanical Science and Technology, vol. 23, no. 1, pp.75-80, 2009
The application of the pseudospectral method to the analysis of helical springs of arbitrary shape
Jinhee Lee
The Journal of Mechanical Science and Technology, vol. 23, no. 1, pp.81-88, 2009
Load effect on the vibration characteristics of a stage with rolling guides
Jui Pin Hung
The Journal of Mechanical Science and Technology, vol. 23, no. 1, pp.89-99, 2009
Suspension mechanism simulation and optimization considering multiple disciplines
Hao Wang
The Journal of Mechanical Science and Technology, vol. 23, no. 1, pp.100-108, 2009
Numerical simulation and experiments of magnetic flux leakage inspection in pipeline steel
Xun-Bo Li
The Journal of Mechanical Science and Technology, vol. 23, no. 1, pp.109-113, 2009
Application of neural networks in evaluation of railway track quality condition
Javad Sadeghi and Hossein Askarinejad
The Journal of Mechanical Science and Technology, vol. 26, no. 1, pp.113-122, 2012
Trajectory optimization with GA and control for quadruped robots
Jong Hyeon Park
The Journal of Mechanical Science and Technology, vol. 23, no. 1, pp.114-123, 2009
Modeling and computation of the three-roller bending process of steel sheets
Ahmed Ktari*, Zied Antar, Nader Haddar and Khaled Elleuch
The Journal of Mechanical Science and Technology, vol. 26, no. 1, pp.123-128, 2012
Multi-objective structural optimization of a HAWT composite blade based on ultimate limit state analysis
Weifei Hu, Insik Han, Sang-Chul Park and Dong-Hoon Choi*
The Journal of Mechanical Science and Technology, vol. 26, no. 1, pp.129-135, 2012
Design optimization of piezoelectric energy harvester subject to tip excitation
Juil Park, Soobum Lee* and Byung Man Kwak
The Journal of Mechanical Science and Technology, vol. 26, no. 1, pp.137-143, 2012
High-temperature dynamic deformation of aluminum alloys using SHPB
Ouk Sub Lee*, HyeBin Choi, HongMin Kim
The Journal of Mechanical Science and Technology, vol. 25, no. 1, pp.143-148, 2011
A two surface plasticity model for the simulation of uniaxial ratchetting response
Dong Keon Kim, Gary F. Dargush, Sung Woo Shin and Jong Wan Hu*
The Journal of Mechanical Science and Technology, vol. 26, no. 1, pp.145-152, 2012
Shape design of a tire contour based on approximation model
Dong Woo Lee, Jong Kyu Kim, Sung Rae Kim, Kwon-Hee Lee*
The Journal of Mechanical Science and Technology, vol. 25, no. 1, pp.149-155, 2011
Estimation of flow curve and friction coefficient by means of a one-step ring test using a neural network coupled with FE simulations
Faramarz Fereshteh-Saniee*, S. Hassan Nourbakhsh and S. Mahmoud Pezeshki
The Journal of Mechanical Science and Technology, vol. 26, no. 1, pp.153-160, 2012
A proper orthogonal decomposition for parametric study of the mechanical behavior of nanowires
Jin Hwan Ko, Kwangsub Jung, Seongseop Kim, Wonbae Kim, Maenghyo Cho*
The Journal of Mechanical Science and Technology, vol. 25, no. 1, pp.157-162, 2011
A cross-sectional analysis of composite beams based on asymptotic framework
Joonho Jeong, Jun-Sik Kim, Yeon June Kang and Maenghyo Cho*
The Journal of Mechanical Science and Technology, vol. 26, no. 1, pp.161-172, 2012
Averaging effects of a strain gage
N. T. Younis*, B. Kang
The Journal of Mechanical Science and Technology, vol. 25, no. 1, pp.163-169, 2011
The difference in the uplift force at each support point of a container crane between FSI analysis and a wind tunnel test
Dong-Seop Han, Geun-Jo Han*
The Journal of Mechanical Science and Technology, vol. 25, no. 2, pp.301-308, 2011
Numerical investigation of the stress field near a crack normal to ceramic–metal interface
Liviu Marsavina*, Tomasz Sadowski, Nicolae Faur
The Journal of Mechanical Science and Technology, vol. 25, no. 2, pp.309-315, 2011
Determination of accelerated condition for brush wear of small brush-type DC motor in using Design of Experiment (DOE) based on the Taguchi method
Wae-Gyeong Shin*, Soo-Hong Lee
The Journal of Mechanical Science and Technology, vol. 25, no. 2, pp.317-322, 2011
Application of the GTN model to predict the forming limit diagram of IF-Steel
Mahmoud Abbasi*, Mohammad A. Shafaat, Mostafa Ketabchi, Davoud F. Haghshenas and Mohammad Abbasi
The Journal of Mechanical Science and Technology, vol. 26, no. 2, pp.345-352, 2012
Crack tip shielding and anti-shielding effects of parallel cracks for a superconductor slab under an electromagnetic force
Zhi-Wen Gao Kang Yong Lee* and You-He Zhou
The Journal of Mechanical Science and Technology, vol. 26, no. 2, pp.353-357, 2012
Parametric study on the fatigue life of railways under rolling contact fatigue by three-dimensional numerical analysis
Doo-Ho Cho, Hwan Seong, Young-Jin Kim, Jae-Boong Choi*, Hyun-Kyu Jun, Jung-Won Seo and Dae-Sang Kim
The Journal of Mechanical Science and Technology, vol. 26, no. 2, pp.359-365, 2012
Microstructural and mechanical properties of nanometric magnesium oxide particulate-reinforced aluminum matrix composites produced by powder metallurgy method
Mohammad Amin Baghchesara* and Hossein Abdizadeh
The Journal of Mechanical Science and Technology, vol. 26, no. 2, pp.367-372, 2012
Composition design and mechanical properties of BCC Ti solid solution alloys with low Young’s modulus
Kelimu Tulugan, CheolHong Park, Wang Qing and Wonjo Park*
The Journal of Mechanical Science and Technology, vol. 26, no. 2, pp.373-377, 2012
Composition design and mechanical properties of BCC Ti solid solution alloys with low Young’s modulus
Kelimu Tulugan, CheolHong Park, Wang Qing and Wonjo Park*
The Journal of Mechanical Science and Technology, vol. 26, no. 2, pp.373-377, 2012
An improved methodology for determining tensile design strengths of Alloy 617
Woo-Gon Kim*, Song-Nan Yin, Ji-Yeon Park, Sung-Deok Hong and Yong-Wan Kim
The Journal of Mechanical Science and Technology, vol. 26, no. 2, pp.379-387, 2012
Elevated temperature design evaluations for the ABTR internal structure
Seok-Hoon Kim*, Gyeong-Hoi Koo and Jong-Bum Kim
The Journal of Mechanical Science and Technology, vol. 26, no. 2, pp.389-400, 2012
Mechanical characterization of flat specimens in tensile test and numerical simulation
Saijun Zhang*, Qinxiang Xia and Ning Yuan
The Journal of Mechanical Science and Technology, vol. 26, no. 2, pp.401-409, 2012
A numerical study of crack interactions under thermo-mechanical load using EFGM
Mohit Pant, I. V. Singh*, B. K. Mishra
The Journal of Mechanical Science and Technology, vol. 25, no. 2, pp.403-413, 2011
Mapping of the morphological and the material characteristics on the glenoid and estimation of predominant loading condition on the glenoid through the mapping
Dohyung Lim
The Journal of Mechanical Science and Technology, vol. 23, no. 2, pp.409-419, 2009
Analysis of a kinked crack in an anisotropic material under antiplane deformation
H. G. Beom*, J. W. Lee and C. B. Cui
The Journal of Mechanical Science and Technology, vol. 26, no. 2, pp.411-419, 2012
Fatigue characteristics of bearing steel in very high cycle fatigue
Chang-Min, Suh
The Journal of Mechanical Science and Technology, vol. 23, no. 2, pp.420-425, 2009
An integrated method of particle swarm optimization and differential evolution
Pyungmo Kim
The Journal of Mechanical Science and Technology, vol. 23, no. 2, pp.426-434, 2009
Characteristics of Sn-2.5Ag flip chip solder joints under thermal shock test conditions
Kyoung Chun Yang
The Journal of Mechanical Science and Technology, vol. 23, no. 2, pp.435-441, 2009
Topology optimization with displacement-based nonconforming finite elements for incompressible materials
Gang-Won Jang
The Journal of Mechanical Science and Technology, vol. 23, no. 2, pp.442-451, 2009
Finite element analysis of piezoelectric underwater transducers for acoustic characteristics
Jaehwan Kim
The Journal of Mechanical Science and Technology, vol. 23, no. 2, pp.452-460, 2009
Some considerations about fatigue failure in milled butt-welded joints affected by residual stress
M. De Giorgi/V. Dattoma/R. Nobile
The Journal of Mechanical Science and Technology, vol. 24, no. 2, pp.453-460, 2010
Numerical analysis for the structural strength comparison of St. Jude Medical and Edwards MIRA bileaflet mechanical heart valve prostheses
Young Joo Kwon
The Journal of Mechanical Science and Technology, vol. 24, no. 2, pp.461-469, 2010
Upper bound analysis of extrusion from square billets through circular and square/rectangular dies
Joseph S. Ajiboye
The Journal of Mechanical Science and Technology, vol. 23, no. 2, pp.461-474, 2009
Analysis of tensile properties for composites with wrinkled fabric
Thanh Trung Do/Dong Joo Lee
The Journal of Mechanical Science and Technology, vol. 24, no. 2, pp.471-479, 2010
A series solution for spatially coupled deflection analysis of thin-walled Timoshenko curved beam with and without elastic foundation
Nam-Il Kim
The Journal of Mechanical Science and Technology, vol. 23, no. 2, pp.475-488, 2009
Assessment of the high-temperature crack behavior for a 316L stainless steel structure with defects
Hyeong-Yeon Lee/ Gyeong-Hoi Koo/Jae-Han Lee
The Journal of Mechanical Science and Technology, vol. 24, no. 2, pp.481-487, 2010
Introduction of control points in B-splines for synthesis of ping finite optimized cam motion program
T. K. Naskar* and R. Mishra
The Journal of Mechanical Science and Technology, vol. 26, no. 2, pp.489-494, 2012
Vision coupled GPS/INS scheme for helicopter navigation
JaeHyung Kim1/Joon Lyou/HwyKuen Kwak
The Journal of Mechanical Science and Technology, vol. 24, no. 2, pp.489-496, 2010
Evolution of micro solder joints under electromigration and elastic field
Dongchoul Kim
The Journal of Mechanical Science and Technology, vol. 23, no. 2, pp.489-497, 2009
Effects of preloads on joints on dynamic stiffness of a whole machine tool structure
Liang MI*, Guo-fu YIN, Ming-nan SUN and Xiao-hu WANG
The Journal of Mechanical Science and Technology, vol. 26, no. 2, pp.495-508, 2012
Shape optimization of mobile phone folder module for structural strength
Gabseong Lee, Jeongseok Park and Dong-Hoon Choi*
The Journal of Mechanical Science and Technology, vol. 26, no. 2, pp.509-515, 2012
Multidisciplinary optimization of a stiffened shell by genetic algorithm
Mahdi Maghsoudi Mehrabani, Ali Asghar Jafari and Mohammad Azadi*
The Journal of Mechanical Science and Technology, vol. 26, no. 2, pp.517-530, 2012
Durability evaluation of a composite bogie frame with bow-shaped side beams
Jung Seok Kim*, Kwang Bok Shin, Hyuk Jin Yoon and Woo Geun Lee
The Journal of Mechanical Science and Technology, vol. 26, no. 2, pp.531-536, 2012
Static behavior of nano/micromirrors under the effect of Casimir force, an analytical approach
Hamid Moeenfard, Ali Darvishian and Mohammad Taghi Ahmaidan*
The Journal of Mechanical Science and Technology, vol. 26, no. 2, pp.537-543, 2012
Mechanical characterization of materials at small length scales
Maria F. Pantano*, Horacio D. Espinosa and Leonardo Pagnotta
The Journal of Mechanical Science and Technology, vol. 26, no. 2, pp.545-561, 2012
Natural frequencies and buckling of pressurized nanotubes using shear deformable nonlocal shell model
R. D. Firouz-Abadi, M. M. Fotouhi, M. R. Permoon and H. Haddadpour
The Journal of Mechanical Science and Technology, vol. 26, no. 2, pp.563-573, 2012
Modal and stress analysis of gear train design in portal axle using finite element modeling and simulation
JongBoon Ooi, Xin Wang*, ChingSeong Tan, Jee-Hou Ho and Ying Pio Lim
The Journal of Mechanical Science and Technology, vol. 26, no. 2, pp.575-589, 2012
Durability analysis of an automotive component in consideration of inhomogeneous hardness
Hee-Jin Shim*, Jung-Kyu Kim
The Journal of Mechanical Science and Technology, vol. 25, no. 3, pp.621-629, 2011
Fatigue life evaluation of mechanical components using vibration fatigue analysis technique
Seong-In Moon*, Il-Je Cho, David Yoon
The Journal of Mechanical Science and Technology, vol. 25, no. 3, pp.631-637, 2011
Machined surface generation using wavelet filtering
Jae-Yong Yang, Moon-Chul Yoon*
The Journal of Mechanical Science and Technology, vol. 25, no. 3, pp.639-645, 2011
Prediction of flow stress of metallic material and interfacial friction condition at high temperature using inverse analysis
Kyungmin Shin/Sukhwan Chi/Naksoo Kim
The Journal of Mechanical Science and Technology, vol. 24, no. 3, pp.639-648, 2010
Spot weld arrangement effects on the fatigue behavior of multi-spot welded joints
Soran Hassanifard*, Mohammad Zehsaz, Firooz Esmaeili
The Journal of Mechanical Science and Technology, vol. 25, no. 3, pp.647-653, 2011
Application of displacement-based design method to assess the level of structural damage due to blast loads
Ramezan Ali Izadifard/Mahmoud Reza Maheri
The Journal of Mechanical Science and Technology, vol. 24, no. 3, pp.649-655, 2010
Analysis of guide modes in vertical hot ring rolling and their effects on the ring’s dimensional precision using FE method
Xiaokai Wang, Lin Hua*
The Journal of Mechanical Science and Technology, vol. 25, no. 3, pp.655-662, 2011
Plastic continuum models for truss lattice materials with cubic symmetry
Taehyo Park/Won-Sup Hwang/Jong Wan Hu
The Journal of Mechanical Science and Technology, vol. 24, no. 3, pp.657-669, 2010
Variable amplitude fatigue crack growth behavior – a short overview
Konjengbam Darunkumar Singh*, Matthew Roger Parry, Ian Sinclair
The Journal of Mechanical Science and Technology, vol. 25, no. 3, pp.663-673, 2011
Reliability and fatigue life evaluation of railway axles
Meral Bayraktar/Necati Tahrali/Rahmi Guclu
The Journal of Mechanical Science and Technology, vol. 24, no. 3, pp.671-679, 2010
Enhancement of J estimation for typical nuclear pipes with a circumferential surface crack under tensile load
D. Cho/S. Woo/Y. Chang/J. Choi/Y. Kim/M. Jhung/Y. Choi
The Journal of Mechanical Science and Technology, vol. 24, no. 3, pp.681-686, 2010
Correction of constraint loss in fracture toughness measurement of PCVN specimens based on fracture toughness diagram
S. Choi/Y. Chang/Y. Kim/M. Kim/B. Lee
The Journal of Mechanical Science and Technology, vol. 24, no. 3, pp.687-692, 2010
A study on the development of a loading device using a photoelastic stress freezing method for the analysis of o-ring stress
J. Nam/J. Hawong/K. Kim/L. Yi/O. Kwon/S. Park
The Journal of Mechanical Science and Technology, vol. 24, no. 3, pp.693-701, 2010
Large deformation and stress analysis of isotropic annular membranes by differential quadrature method
A. A. Atai/M. Mozaffari
The Journal of Mechanical Science and Technology, vol. 24, no. 3, pp.703-709, 2010
Creep-fatigue design studies for a sodium-cooled fast reactor with tube sheet-toshell structure subjected to elevated temperature service
Gyeong-Hoi Koo/Jae-Han Lee
The Journal of Mechanical Science and Technology, vol. 24, no. 3, pp.711-719, 2010
Generalized thermodiffusion for an unbounded body with a spherical cavity subjected to periodic loading
A. M. Zenkour*, D. S. Mashat and A. E. Abouelregal
The Journal of Mechanical Science and Technology, vol. 26, no. 3, pp.749-757, 2012
Effects of material properties and hole designs of the jig on the fatigue life of dental implants
Jong-Su Bae and Hyun-Yong Jeong*
The Journal of Mechanical Science and Technology, vol. 26, no. 3, pp.759-766, 2012
A comparative computational investigation on the effects of randomly distributed general corrosion on the post-buckling behaviour of uniaxially loaded plates
Mohammad Reza Khedmati*, Zorareh Hadj Mohammad Esmaeil Nouri and Mohammad Mahdi Roshanali
The Journal of Mechanical Science and Technology, vol. 26, no. 3, pp.767-783, 2012
Optimization of a structure with contact conditions using equivalent loads
Sang-Il Yi, Hyun-Ah Lee, Gyung-Jin Park*
The Journal of Mechanical Science and Technology, vol. 25, no. 3, pp.773-782, 2011
Use of simple finite elements for mechanical systems impact analysis based on stereomechanics, stress wave propagation, and energy method approaches
Michael L. McCoy, Rasoul Moradi, Hamid M. Lankarani*
The Journal of Mechanical Science and Technology, vol. 25, no. 3, pp.783-795, 2011
Study on the scattering of 2-D Rayleigh waves by a cavity based on BEM simulation
Weiwei Liu, Younho Cho*, Haidang Phan, Jan D. Achenbach
The Journal of Mechanical Science and Technology, vol. 25, no. 3, pp.797-802, 2011
Numerical simulations of motion behaviors of pan mechanism in a cooking robot with granular cuisine
Yuan Chen, Zongquan Deng, Bing Li*
The Journal of Mechanical Science and Technology, vol. 25, no. 3, pp.803-808, 2011
Buckling analysis of laminated composite rectangular plates reinforced by SWCNTs using analytical and finite element methods
A. Ghorbanpour Arani*, Sh. Maghamikia, M. Mohammadimehr, A. Arefmanesh
The Journal of Mechanical Science and Technology, vol. 25, no. 3, pp.809-820, 2011
An investigation of the influences of noise on EEG power bands and visual cognitive responses for human-oriented product design
Wonhak Cho, Sung-Ho Hwang and Hyeonki Choi*
The Journal of Mechanical Science and Technology, vol. 25, no. 3, pp.821-826, 2011
Temperature and thickness effects on thermal and mechanical stresses of rotating FG-disks
Mehrnoosh Damircheli and Mohammad Azadi*
The Journal of Mechanical Science and Technology, vol. 25, no. 3, pp.827-836, 2011
Design optimization of a wind turbine blade to reduce the fluctuating unsteady aerodynamic load in turbulent wind
Jihoon Jeong, Kyunghyun Park, Sangook Jun Kisun Song and Dong-Ho Lee*
The Journal of Mechanical Science and Technology, vol. 26, no. 3, pp.827-838, 2012
Calculation method and control value of static stiffness of tower crane
Lanfeng Yu
The Journal of Mechanical Science and Technology, vol. 22, no. 5, pp.829-834, 2008
Stress analysis of two-dimensional cellular materials with thick cell struts
Han Sung Kim
The Journal of Mechanical Science and Technology, vol. 22, no. 5, pp.835-845, 2008
On singularities of multi-degree-of-freedom spherical mechanisms
Soheil Zarkandi*
The Journal of Mechanical Science and Technology, vol. 26, no. 3, pp.839-846, 2012
Alterations to the mechanical response of the gastrointestinal tract induced by functional gastrointestinal disorders and the feasibility of developing an ultrasonic diagnostic system
Yong-Heum Lee
The Journal of Mechanical Science and Technology, vol. 22, no. 5, pp.846-855, 2008
Design of precision angular indexing system for calibration of rotary tables
Oh Yeon Taek*
The Journal of Mechanical Science and Technology, vol. 26, no. 3, pp.847-855, 2012
Preliminary application of the draft code case for alloy 617 for a high temperature component
Hyeong-Yeon Lee
The Journal of Mechanical Science and Technology, vol. 22, no. 5, pp.856-863, 2008
Use of Wigner-Ville transformations for fluid particles in laser Doppler flow accelerometry
Sejong Chun* and Hyu-Sang Kwon*
The Journal of Mechanical Science and Technology, vol. 26, no. 3, pp.857-867, 2012
Failure analysis of turbine blade in atomic power plant
Won Sik Joo
The Journal of Mechanical Science and Technology, vol. 22, no. 5, pp.864-870, 2008
Enriched finite element method for 2-D and 3-D blunt crack problems in a viscoelastic medium
Jingbo Duan, Yongjun Lei* and Daokui Li
The Journal of Mechanical Science and Technology, vol. 26, no. 3, pp.869-882, 2012
A finite element formulation based on an enhanced first order shear deformation theory for composite and sandwich structures
Maenghyo Cho
The Journal of Mechanical Science and Technology, vol. 22, no. 5, pp.871-878, 2008
A finite-element analysis of the connecting bolts of slewing bearings based on the orthogonal method
Ming Qiu*, Jiafei Yan, Binhai Zhao, Long Chen and Yaoxing Bai
The Journal of Mechanical Science and Technology, vol. 26, no. 3, pp.883-887, 2012
Viscoelastic analysis of an exponentially graded sandwich plate
A. M. Zenkour*
The Journal of Mechanical Science and Technology, vol. 26, no. 3, pp.889-898, 2012
Investigation of isochronous stress-strain formulations for elevated temperature structural design
Gyeong-Hoi Koo* and Jong-Bum Kim
The Journal of Mechanical Science and Technology, vol. 26, no. 3, pp.899-903, 2012
Analysis of crease-wrinkle interaction for thin sheets
Kyeongsik Woo* and Christopher H. Jenkins
The Journal of Mechanical Science and Technology, vol. 26, no. 3, pp.905-916, 2012
Analytical solution of wave propagation in a non-homogeneous orthotropic rotating elastic media
A. M. Abd-Alla and S. R. Mahmoud*
The Journal of Mechanical Science and Technology, vol. 26, no. 3, pp.917-926, 2012
A smart interfacing method based on domain/boundary decomposition for efficient thermo-elasto-viscoplastic damage and contact analysis
Seung-Hee Kang, Sung Jun Kim and Eui Sup Shin*
The Journal of Mechanical Science and Technology, vol. 26, no. 3, pp.927-940, 2012
Anti-plane moving crack in a functionally graded piezoelectric layer between two dissimilar piezoelectric strips
Jeong Woo Shin and Young-Shin Lee*
The Journal of Mechanical Science and Technology, vol. 26, no. 4, pp.1017-1025, 2012
Study on true stress correction from tensile tests
Choung, J. M
The Journal of Mechanical Science and Technology, vol. 22, no. 6, pp.1039-1051, 2008
Reliability analysis using an enhanced response surface moment method
Dong-Hoon Choi
The Journal of Mechanical Science and Technology, vol. 22, no. 6, pp.1052-1057, 2008
Analytical investigation on axisymmetric free vibrations of moderately thick circular functionally graded plate integrated with piezoelectric layers
A. Rastgoo
The Journal of Mechanical Science and Technology, vol. 22, no. 6, pp.1058-1072, 2008
A new method based on LPP and NSGA-II for multiobjective robust collaborative optimization
Haiyan Li, Mingxu Ma, Yuanwei Jing
The Journal of Mechanical Science and Technology, vol. 25, no. 5, pp.1071-1079, 2011
A study to maximize the crash energy absorption efficiency within the limits of crash space
Bae-Young Kim, Choong-Min Jeong, Si-Woo Kim and Myung-Won Suh*
The Journal of Mechanical Science and Technology, vol. 26, no. 4, pp.1073-1078, 2012
Damage detection by the distribution of predicted constraint forces
Salam Rahmatalla, Eun-Taik Lee and Hee-Chang Eun*
The Journal of Mechanical Science and Technology, vol. 26, no. 4, pp.1079-1087, 2012
A structure-based approach to evaluation product adaptability in adaptable design
Qiang Cheng, Guojun Zhang*, Zhifeng Liu, Peihua Gu, Ligang Cai
The Journal of Mechanical Science and Technology, vol. 25, no. 5, pp.1081-1094, 2011
Predictive carbon nanotube models using the eigenvector dimension reduction (EDR) method
Zhimin Xi and Byeng D. Youn*
The Journal of Mechanical Science and Technology, vol. 26, no. 4, pp.1089-1097, 2012
Reliability based optimal design of a helicopter considering annual variation of atmospheric temperature
Sanghun Kim, Sangook Jun, Hyungmin Kang, Yongjin Park and Dong-Ho Lee*
The Journal of Mechanical Science and Technology, vol. 25, no. 5, pp.1095-1104, 2011
Coupled linkage system optimization for minimum power consumption
Kihan Shin, Sungcheul Lee, Hyunpyo Shin*, Youngsun Yoo and Jongwon Kim
The Journal of Mechanical Science and Technology, vol. 26, no. 4, pp.1099-1106, 2012
Limit-point buckling analyses using solid, shell and solid–shell elements
Marc Killpack and Farid Abed-Meraim*
The Journal of Mechanical Science and Technology, vol. 25, no. 5, pp.1105-1117, 2011
Improvement of the performance of a tetrahedral element with rotational DOFs using strain smoothing techniques
Chang Min Shin*, Seung Han Kang and Byung Chai Lee
The Journal of Mechanical Science and Technology, vol. 26, no. 4, pp.1107-1114, 2012
Efficient frequency response and its direct sensitivity analyses for large-size finite element models using Krylov subspace-based model order reduction
Jeong Sam Han*
The Journal of Mechanical Science and Technology, vol. 26, no. 4, pp.1115-1126, 2012
Modeling of time-variant heterogeneous objects in micro-system packages
Ki-Hoon Shin*
The Journal of Mechanical Science and Technology, vol. 25, no. 5, pp.1119-1128, 2011
Non-linear analysis of skew thin plate by finite difference method
Chi-Kyung Kim* and Myung-Hwan Hwang
The Journal of Mechanical Science and Technology, vol. 26, no. 4, pp.1127-1132, 2012
Behavior of a viscoelastic composite plates under transient load
A. E. Assie, M. A. Eltaher* and F. F. Mahmoud
The Journal of Mechanical Science and Technology, vol. 25, no. 5, pp.1129-1140, 2011
Ultimate load and release time controllable non-explosive separation device using a shape memory alloy actuator
Wonjun Tak, Minsu Lee and Byungkyu Kim*
The Journal of Mechanical Science and Technology, vol. 25, no. 5, pp.1141-1147, 2011
Effect of loading and lamination parameters on the optimum design of laminated plates
A. E. Assie, A. M. Kabeel* and F. F. Mahmoud
The Journal of Mechanical Science and Technology, vol. 25, no. 5, pp.1149-1158, 2011
Study on determination of durability analysis process and fatigue damage parameter for rubber component
Seong-In Moon*, Il-Je Cho, Chang-Su Woo and Wan-Doo Kim
The Journal of Mechanical Science and Technology, vol. 25, no. 5, pp.1159-1165, 2011
Evaluation of surface cracking in micron and sub-micron scale scratch tests for optical glass BK7
Weibin Gu* and Zhenqiang Yao
The Journal of Mechanical Science and Technology, vol. 25, no. 5, pp.1167-1174, 2011
Analysis of fatigue resistance of continuous and non-continuous welded rectangular frame intersections by finite element method
M. L. McCoy, R. Moradi* and H. M. Lankarani
The Journal of Mechanical Science and Technology, vol. 25, no. 5, pp.1175-1183, 2011
The suggestion of the standardized finite element model through the experimental verifications of various railway vehicle structures made of sandwich composites
Hee-Young Ko, Kwang-Bok Shin* and Sung-Ho Hahn
The Journal of Mechanical Science and Technology, vol. 25, no. 5, pp.1185-1192, 2011
Reliability-based sensitivity of mechanical components with arbitrary distribution parameters
Yimin Zhang/Xiangdong He/Zhou Yang/Qiaoling Liu/Bangchun Wen
The Journal of Mechanical Science and Technology, vol. 24, no. 6, pp.1187-1193, 2010
Buckling limit evaluations for reactor vessel of ABTR
Gyeong-Hoi Koo* and Suk-Hoon Kim
The Journal of Mechanical Science and Technology, vol. 25, no. 5, pp.1193-1199, 2011
Finite element study for determination of material’s creep parameters from small punch test
Jianjun Chen/Young Wha Ma/Kee Bong Yoon
The Journal of Mechanical Science and Technology, vol. 24, no. 6, pp.1195-1201, 2010
Crack-tip opening angle-based numerical implementation for fully plastic crack growth analyses
Sunghwan Jung* and Hyungyil Lee
The Journal of Mechanical Science and Technology, vol. 25, no. 5, pp.1201-1206, 2011
Mathematical model for determination of strand twist angle and diameter in stranded-wire helical springs
Shilong Wang/Song Lei/Jie Zhou / Hong Xiao
The Journal of Mechanical Science and Technology, vol. 24, no. 6, pp.1203-1210, 2010
Crack-tip field characterization of crack-tip opening angle-based crack growth – plane strain single-edge cracked specimen subject to pure extension
Sunghwan Jung* and Hyungyil Lee
The Journal of Mechanical Science and Technology, vol. 25, no. 5, pp.1207-1213, 2011
Choosing a suitable sample size in descriptive sampling
Yong-Kyun Lee/ Dong-Hoon Choi/ Kyung-Joon Cha
The Journal of Mechanical Science and Technology, vol. 24, no. 6, pp.1211-1218, 2010
Evaluation of slant crack propagation under RCF in railway rail
Xiangyuan Xu, Doo-Ho Cho, Yoon-Suk Chang, Jae-Boong Choi, Young-Jin Kim*, Hyun-Kyu Jun, Jung-Won Seo and Dae-Sang Kim
The Journal of Mechanical Science and Technology, vol. 25, no. 5, pp.1215-1220, 2011
Derivation of optimal design of cockpit module considering vibration and heat-resistance characteristics
Hyunjun Kim/Hoon Cho/ Youngtak Son/ Hyekyung Kim/Haeryong Kim/Myungwon Suh
The Journal of Mechanical Science and Technology, vol. 24, no. 6, pp.1219-1224, 2010
Topological design of heat dissipating structure with forced convective heat transfer
Gil Ho Yoon
The Journal of Mechanical Science and Technology, vol. 24, no. 6, pp.1225-1233, 2010
Reliability design of preventive maintenance scheduling for cumulative fatigue damage
Seok-Heum Baek
The Journal of Mechanical Science and Technology, vol. 23, no. 5, pp.1225-1233, 2009
Efficiency of grid representation and its algorithms for areal 3D scan data
Minho Chang
The Journal of Mechanical Science and Technology, vol. 23, no. 5, pp.1234-1243, 2009
Investigation of the fracture characteristics of the interfacial bond between bone and cement: experimental and finite element approaches
Fu-Tsai Chiang/ Jui-Pin Hung
The Journal of Mechanical Science and Technology, vol. 24, no. 6, pp.1235-1244, 2010
Assessment of the sulfide stress corrosion cracking characteristics in the multi-pass weld of the A106 Gr B steel pipe
Gyuyoung Lee
The Journal of Mechanical Science and Technology, vol. 23, no. 5, pp.1244-1248, 2009
Experimental and numerical assessment of the improvement of the load-carrying capacities of butterfly-shaped coupling components in composite structures
Gürkan Altan/ Muzaffer Topçu
The Journal of Mechanical Science and Technology, vol. 24, no. 6, pp.1245-1254, 2010
Strength modeling using Weibull distributions
Saralees Nadarajah
The Journal of Mechanical Science and Technology, vol. 22, no. 7, pp.1247-1254, 2008
Improved dimension reduction method (DRM) in uncertainty analysis using kriging interpolation
Junho Won
The Journal of Mechanical Science and Technology, vol. 23, no. 5, pp.1249-1260, 2009
The model for fracture toughness
Saralees Nadarajah
The Journal of Mechanical Science and Technology, vol. 22, no. 7, pp.1255-1258, 2008
Evaluation of cyclic plasticity models of multi-surface and non-linear hardening by an energy-based fatigue criterion
Shahram Shahrooi/ Ibrahim Henk Metselaar/ Zainul Huda
The Journal of Mechanical Science and Technology, vol. 24, no. 6, pp.1255-1260, 2010
Internet-based dimensional verification system for reverse engineering processes
Sung-Chong Chung
The Journal of Mechanical Science and Technology, vol. 22, no. 7, pp.1259-1268, 2008
Newly developed walking apparatus for identification of obstructions by visually impaired people
Mitsuhiro Okayasu
The Journal of Mechanical Science and Technology, vol. 24, no. 6, pp.1261-1264, 2010
Role of extruded texture on fatigue crack growth in a high strength aluminum alloy thick-walled cylinder
M. A. Malik
The Journal of Mechanical Science and Technology, vol. 23, no. 5, pp.1261-1269, 2009
The effect of change in width on stress distribution along the curved segments of stents
Kyung Soon Jang/Tae Won Kang/Kee Sung Lee/ Chul Kim / Tae-Woo Kim
The Journal of Mechanical Science and Technology, vol. 24, no. 6, pp.1265-1271, 2010
A unified brittle fracture criterion for structures with sharp V-notches under mixed mode loading
Sang Bong Cho
The Journal of Mechanical Science and Technology, vol. 22, no. 7, pp.1269-1278, 2008
Effect of imperfections on the mechanical behavior of wire-woven bulk kagome truss PCMs under shear loading
Sangil Hyun
The Journal of Mechanical Science and Technology, vol. 23, no. 5, pp.1270-1277, 2009
Formulation of elastic modulus of concrete using linear genetic programming
Amir Hossein Gandomi/ Amir Hossein Alavi/ Mohammad Ghasem Sahab/ Parvin Arjmandi
The Journal of Mechanical Science and Technology, vol. 24, no. 6, pp.1273-1278, 2010
Data format and browser of lightweight CAD files for dimensional verification over the internet
In-Ho Song
The Journal of Mechanical Science and Technology, vol. 23, no. 5, pp.1278-1288, 2009
study on the development of photoelastic experimental hybrid method for colour isochromatics (Ⅰ)
Jai-sug Hawong/ Jeong-hwan Nam/ Kyo-Hyoung Kim/ O-sung Kwon/ Gun Kwon/ Sung-han Park
The Journal of Mechanical Science and Technology, vol. 24, no. 6, pp.1279-1287, 2010
A comparison of residual stresses in built-up steel beams using hole-drilling method
M. A. Nawafleh
The Journal of Mechanical Science and Technology, vol. 23, no. 5, pp.1289-1293, 2009
Torsional buckling of a DWCNT embedded on winkler and pasternak foundations using nonlocal theory
M. Mohammadimehr/A. R. Saidi/A. Ghorbanpour Arani/A. Arefmanesh/Q. Han
The Journal of Mechanical Science and Technology, vol. 24, no. 6, pp.1289-1299, 2010
Micromechanically consistent calculation of rotational stiffness of radial tire
Yong-Woo Kim
The Journal of Mechanical Science and Technology, vol. 23, no. 5, pp.1294-1305, 2009
Process analysis and test of manufacturing of sleeve spring-type torsional vibration damper
Beom Cheol Hwang/Won Byong Bae/Chul Kim
The Journal of Mechanical Science and Technology, vol. 24, no. 6, pp.1301-1309, 2010
Characteristics of a transiently propagating crack in functionally graded materials
Kwang Ho Lee
The Journal of Mechanical Science and Technology, vol. 23, no. 5, pp.1306-1322, 2009
Fractality in turbulence
S. M. Muztaba Salim and Franck Nicolleau
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1311-1314, 2012
Prediction of flow crossover in the GDL of PEFC using serpentine flow channel
Litan Kumar Saha and Nobuyuki Oshima
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1315-1320, 2012
Theoretical investigations on the effect of system parameters in series hydraulic hybrid system with hydrostatic regenerative braking
R. Ramakrishnan, Somashekhar S. Hiremath and M. Singaperumal
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1321-1331, 2012
Prediction of fatigue life distribution of marine propeller materials
Han-Yong Yoon
The Journal of Mechanical Science and Technology, vol. 23, no. 5, pp.1323-1330, 2009
Feature-based non-manifold modeling system to integrate design and analysis of injection molding products
Sang Hun Lee
The Journal of Mechanical Science and Technology, vol. 23, no. 5, pp.1331-1341, 2009
A steady flow analsys on a cerebral aneurysm model with several stents for new stent design using PIV
Chang-Ho Yu, Kaoru Matsumoto, Shuya Shida, Dong Joon Kim and Makoto Ohta
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1333-1340, 2012
A numerical study on the entry problem of an elastic body using a level set method and a monolithic formulation
Hyoung Gwon Choi
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1341-1346, 2012
ExLO: A three-dimensional total shock physics FEM code
Minhyung Lee
The Journal of Mechanical Science and Technology, vol. 23, no. 5, pp.1342-1353, 2009
Numerical simulation of multiphase flows with material interface Numerical simulation of multiphase flows with material interface
Hyon Kook Myong
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1347-1354, 2012
Finite element simulation of blood flow in a flexible carotid artery bifurcation
Sang Hoon Lee, Hyoung Gwon Choi, Jung Yul Yoo
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1355-1361, 2012
Numerical assessment of turbulent models at a critical regime on unstructured meshes
Ju Yeol You and Oh Joon Kwon
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1363-1369, 2012
Numerical study on the range enhancement of a centrifugal compressor with a ring groove system
Chi-Yong Park, Young-Seok Choi, Kyoung-Yong Lee and Joon-Yong Yoon
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1371-1378, 2012
Numerical study on unsteadiness of tip clearance flow and performance prediction of axial compressor
Yoojun Hwang and Shin-Hyoung Kang
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1379-1389, 2012
On uncertainty and local sensitivity analysis for transient conjugate heat transfer problems
Christian Rauch
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1391-1402, 2012
Study on droplet formation with surface tension for electrohydrodynamic inkjet nozzle
Soo-Hong Lee, Xuan Hung Nguyen and Han Seo Ko
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1403-1408, 2012
Static/dynamic contact FEA and experimental study for tooth profile modification of helical gears
Yong-jun Wu, Jian-jun Wang and Qin-kai Han
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1409-1417, 2012
Prediction of vibration characteristics of a planar mechanism having imperfect joints using neural network
Selçuk Erkaya
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1419-1430, 2012
Fault diagnosis using binary tree and sphere-structured support vector machines
ShengFa Yuan and Ming Li
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1431-1438, 2012
Vibration of circular plate with multiple eccentric circular perforations by the Rayleigh-Ritz method
Khodabakhsh Saeedi, Alfin Leo, Rama B. Bhat and Ion Stiharu
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1439-1448, 2012
A Study on the Heat Treatment Characteristics of Ti-alloys without Al as Biomaterials
Jaesam Ban
The Journal of Mechanical Science and Technology, vol. 22, no. 8, pp.1447-1450, 2008
Experimental and numerical investigation of modal properties for liquid-containing structures
Hassan Jalali and Fardin Parvizi
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1449-1454, 2012
Structural integrity assessment of reactor pressure vessels during pressurized thermal shock
Myung Jo Jhung
The Journal of Mechanical Science and Technology, vol. 22, no. 8, pp.1451-1459, 2008
Nonlocal electro-thermal transverse vibration of embedded fluid-conveying DWBNNTs
A. Ghorbanpour Arani, M. Shokravi, S. Amir and M.R. Mozdianfard
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1455-1462, 2012
Stress in Piezoelectric Hollow Sphere with Thermal Gradient
mahdi saadatfar
The Journal of Mechanical Science and Technology, vol. 22, no. 8, pp.1460-1467, 2008
Characterizations of gun barrel vibrations of during firing based on shock response analysis and short-time Fourier transform
Hak In Gimm, Ki Up Cha and Chang Ki Cho
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1463-1470, 2012
Soundproof effect of nanoreinforced polymer composites
Yeon-Jun Kang
The Journal of Mechanical Science and Technology, vol. 22, no. 8, pp.1468-1474, 2008
Research on corrosion behavior of A6N01S-T5 aluminum alloy welded joint for high-speed trains
Guoqing Gou, Nan Huang, Hui Chen, Hongmei Liu, Aiqin Tian and Zhicheng Guo
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1471-1476, 2012
Fuzzy Logic versus a PID Controller for Position Control of a Muscle-like Actuated Arm
C. S. Lee
The Journal of Mechanical Science and Technology, vol. 22, no. 8, pp.1475-1482, 2008
Analysis of glass fabric impregnation using a resin drop method
Seung-Wook Han, Nak-Sam Choi and Min-Soo Lee
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1477-1482, 2012
A study on the thermomechanical behavior of semiconductor chips on thin silicon substrate
Seyoung Im
The Journal of Mechanical Science and Technology, vol. 22, no. 8, pp.1483-1489, 2008
Effects of gradient on stress distribution in rotating functionally graded solid disks
Xu-Long Peng and Xian-Fang Li
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1483-1492, 2012
A study on increasing the performance of Savonius wind rotors
Burçin Deda Altan and Mehmet Atılgan
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1493-1499, 2012
Numerical investigation of effects of buoyancy around a heated circular cylinder in parallel and contra flow
Armando A. Soares, Nuno D. Couto, M. Duarte Naia, Norberto J. Gonçalves and Abel Rouboa
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1501-1513, 2012
Numerical study on the rotation of an elastic rod in a viscous fluid using an immersed boundary method
Ranjith Maniyeri and Sangmo Kang
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1515-1522, 2012
Hydrodynamic study involving a maxblend impeller with yield stress fluids
Houari Ameur, Mohamed Bouzit and Mustapha Helmaoui
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1523-1530, 2012
Effects of inlet radius and bell mouth radius on flow rate and sound quality of centrifugal blower
Pham Ngoc Son, Jae Won Kim, S. M. Byun and E. Y. Ahn
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1531-1538, 2012
Using characteristic strings to derive valid contracted graphs with hexagonal links plus other links for type synthesis of closed mechanisms
Yi Lu, Yang Lu, Nijia Ye, Bingyi Mao, Chunping Sui and Jianda Han
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1539-1546, 2012
A cyclic simulation approach for the generation of the non-stationary load histories of engineering vehicles
Jixin Wang, Jianhua Zhang, Yunlong Liang and Yonghai Yang
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1547-1554, 2012
Residual stress field of ballised holes
Man On Lai and Zhimin He
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1555-1565, 2012
Optimal design of spaced plates under hypervelocity impact
Younghoon Kim, Jeonghoon Yoo and Minhyung Lee
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1567-1575, 2012
Frequency shift of a nanomechanical sensor carrying a nanoparticle using nonlocal Timoshenko beam theory
Zhi-Bin Shen, Dao-Kui Li, Dong Li and Guo-Jin Tang
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1577-1583, 2012
An improved dynamic milling force coefficients identification method considering edge force
Guofeng Wang, Dongbiao Peng, Xuda Qin and Yinhu Cui
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1585-1590, 2012
Single discharge thermo-electrical modeling of micromachining mechanism in electric discharge machining
Yasin Sarikavak and Can Cogun
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1591-1597, 2012
Recurrent-neural-network-based identification of a cascade hydraulic actuator for closed-loop automotive power transmission control
Seung-Han You and Jin-Oh Hahn
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1599-1606, 2012
Covariance upperbound controllers for networked control systems
Sangho Ko
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1607-1614, 2012
Effect of variable viscosity on thermal boundary layer over a permeable flat plate with radiation and a convective surface boundary condition
Oluwole Daniel Makinde
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1615-1622, 2012
Multiple defect diagnostics of gas turbine engine using SVM and RCGA-based ANN algorithms
Youngho Kim, Junyoung Jang, Wanjo Kim, Tae-Seong Roh* and Dong-Whan Choi
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1623-1632, 2012
Effects of gas and particle emissions on wall radiative heat flux in oxy-fuel combustion
Sanghyun Park, Jungeun A. Kim, Changkook Ryu, Won Yang, Young Ju Kim and Sangil Seo
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1633-1641, 2012
Optimization of operating parameters and performance evaluation of forced draft cooling tower using response surface methodology (RSM) and artificial neural network (ANN)
Ramkumar Ramakrishnan and Ragupathy Arumugam
The Journal of Mechanical Science and Technology, vol. 26, no. 5, pp.1643-1650, 2012
Structural optimization for a jaw using iterative Kriging metamodels
Kwon-Hee Lee
The Journal of Mechanical Science and Technology, vol. 22, no. 9, pp.1651-1659, 2008
Development and validation of FE models of impactor for pedestrian testing
Tso-Liang Teng
The Journal of Mechanical Science and Technology, vol. 22, no. 9, pp.1660-1667, 2008
Topology optimization of compressor bracket
Young Shin Lee
The Journal of Mechanical Science and Technology, vol. 22, no. 9, pp.1668-1676, 2008
Development of diagnosis system for knife and strip cutting face in the side trimming process
C. M. Suh
The Journal of Mechanical Science and Technology, vol. 22, no. 9, pp.1677-1683, 2008
Nondestructive evaluation of a crack on austenitic stainless steel using a sheet type induced current and a Hall sensor array
Jinyi Lee
The Journal of Mechanical Science and Technology, vol. 22, no. 9, pp.1684-1691, 2008
Dynamic deformation of hot temperature degraded POM and PP using a modified SHPB with pulse shaper technique
Dong Hyeok Kim
The Journal of Mechanical Science and Technology, vol. 22, no. 9, pp.1692-1698, 2008
Magnetic circuit design by topology optimization for Lorentz force maximization in a microspeaker
Yoon Young Kim
The Journal of Mechanical Science and Technology, vol. 22, no. 9, pp.1699-1706, 2008
A semi-analytical technique for bending analysis of cylindrical panels with general loading and boundary conditions
Rahbar Ranji A, Rostami Hoseynabadi H
The Journal of Mechanical Science and Technology, vol. 26, no. 6, pp.1711-1718, 2012
Reliability prediction of engineering systems with competing failure modes due to component degradation
Young Kap Son*
The Journal of Mechanical Science and Technology, vol. 25, no. 7, pp.1717-1725, 2011
Thermal fatigue of cast iron brake disk materials
Byeong-choon Goo, Choong-hwan Lim
The Journal of Mechanical Science and Technology, vol. 26, no. 6, pp.1719-1724, 2012
Adhesion strength in laminated glazings containing multilayer solar control coatings
"J. O. Aguilar, J. M. Rodríguez-Lelis, M. Carrasco de la Fuente, C. López-Mata,
The Journal of Mechanical Science and Technology, vol. 26, no. 6, pp.1725-1730, 2012
Effect of welding heat input on fatigue life of quenched boron steel and FB steel lap joint
Chang Hee Suh, Rac Gyu Lee, Sang Kyun Oh, Yun-Chul Jung*, Je-Young Son and Young Suk Kim
The Journal of Mechanical Science and Technology, vol. 25, no. 7, pp.1727-1735, 2011
Empirical modeling of shot peening parameters for welded austenitic stainless steel using grey relational analysis
Lakhwinder Singh, R. A. Khan and M. L. Aggarwal
The Journal of Mechanical Science and Technology, vol. 26, no. 6, pp.1731-1739, 2012
Development of lumped-parameter mathematical models for a vehicle localized impact
Witold Pawlus, Hamid Reza Karimi* and Kjell Gunnar Robbersmyr
The Journal of Mechanical Science and Technology, vol. 25, no. 7, pp.1737-1747, 2011
Microstructure and wear characteristics on Al alloy matrix composite reinforced with Ni perform
Wonjo Park, Cheolhong Park, Hyungjin Kim and Sunchul Huh*
The Journal of Mechanical Science and Technology, vol. 26, no. 6, pp.1741-1746, 2012
Fatigue life analysis of shot-peened bearing steel
Sang-Jae Yoon, Jung-Hoon Park and Nak-Sam Choi*
The Journal of Mechanical Science and Technology, vol. 26, no. 6, pp.1747-1752, 2012
3-D finite element analysis for thermo-mechanical behavior of laminated carbon-phenolic composite ring
Yi-jun Yoo* and Sun-pyo Lee
The Journal of Mechanical Science and Technology, vol. 25, no. 7, pp.1775-1780, 2011
Effects of flank deviation on load distributions for helical gear
Jing Wei*, Wei Sun and Licun Wang
The Journal of Mechanical Science and Technology, vol. 25, no. 7, pp.1781-1789, 2011
Bending actuation in a single-layer carbon-nanofiber/polypyrrole composite film and its fabrication
Shuai Zhang and Cheol Kim*
The Journal of Mechanical Science and Technology, vol. 25, no. 7, pp.1791-1791, 2011
Effect of diffuser angle on the discharge coefficient of miniature critical nozzles
Jae-Hyung Kim, Heuy-Dong Kim
The Journal of Mechanical Science and Technology, vol. 24, no. 9, pp.1793-1798, 2010
A study on the development of photoelastic experimental hybrid method for colour isochromatics (II)
Jeong-Hwan Nam, Jai-Sug Hawong*, Gun Kwon, Dong-Chul Shin, Bruno R. Mose and Sung-Han Park
The Journal of Mechanical Science and Technology, vol. 25, no. 7, pp.1797-1809, 2011
Optimization of the forging of aerofoil blade using the finite element method and fuzzy-Pareto based genetic algorithm
V. Alimirzaloo*, M. H. Sadeghi and F. R. Biglari
The Journal of Mechanical Science and Technology, vol. 26, no. 6, pp.1801-1810, 2012
Limit load analysis of shallow arches made of functionally bi-directional graded materials under mechanical loading
Ali Asghar Atai*, Mohammad Hassan Naei and Shabnam Rahrovan
The Journal of Mechanical Science and Technology, vol. 26, no. 6, pp.1811-1816, 2012
FEM based simulation of the pulsed laser ablation process in nanosecond fields
Hee Seung Lim and Jeonghoon Yoo*
The Journal of Mechanical Science and Technology, vol. 25, no. 7, pp.1811-1816, 2011
Intersegmental dynamics of the lower limb in vertical jumps
Young-Kwan Kim and Yoon Hyuk Kim*
The Journal of Mechanical Science and Technology, vol. 25, no. 7, pp.1817-1822, 2011
The effect of tube dimensions on optimized pressure and force loading paths in tube hydroforming process
S. M. H. Seyedkashi, H. Moslemi Naeini, G. H. Liaghat, M. Mosavi Mashadi, M. Mirzaali, K. Shojaee and Y. H. Moon*
The Journal of Mechanical Science and Technology, vol. 26, no. 6, pp.1817-1822, 2012
The influence of assembly clearance on the deformation and stress of an assembly structure through FEA simulation
Ahmad Zia* and Lihong Qiao
The Journal of Mechanical Science and Technology, vol. 26, no. 6, pp.1823-1827, 2012
The unified equations to obtain the exact solutions of piezoelectric plane beam subjected to arbitrary loads
Zhang Lang*, Gao Puyun, Li Dongxu and Wang Xue
The Journal of Mechanical Science and Technology, vol. 25, no. 7, pp.1823-1835, 2011
An experimental evaluation of pre-yield and post-yield rheological models of magnetic field dependent smart materials
N. Mohammadi, M. J. Mahjoob, B. Kaffashi, S. Malakooti
The Journal of Mechanical Science and Technology, vol. 24, no. 9, pp.1829-1837, 2010
Thermal stresses in an infinite circular cylinder
A. M. Abd-Alla, G. A.Yahya and A. M. Farhan
The Journal of Mechanical Science and Technology, vol. 26, no. 6, pp.1829-1839, 2012
Effect of material inhomogeneity on the rotating functionally of a graded orthotropic hollow cylinder
H. M. Wang
The Journal of Mechanical Science and Technology, vol. 24, no. 9, pp.1839-1844, 2010
Deformation characteristics of various grain boundary angles on AFM-based nanolithography using molecular dynamics
Chan Il Kim, Seung Han Yang and Young Suk Kim*
The Journal of Mechanical Science and Technology, vol. 26, no. 6, pp.1841-1847, 2012
A review on the research of mechanical problems with different moduli in tension and compression
Jun-yi Sun, Hai-qiao Zhu, Shi-hong Qin, Da-lin Yang, Xiao-ting He
The Journal of Mechanical Science and Technology, vol. 24, no. 9, pp.1845-1854, 2010
Combining stress relaxation and rheometer test results in modeling a polyurethane stopper
Kyukwon Bang and H.-Y. Jeong*
The Journal of Mechanical Science and Technology, vol. 26, no. 6, pp.1849-1855, 2012
Analytical and experimental studies for deformation of circular plates subjected to blast loading
Hashem Gharababaei, Abolfazl Darvizeh, Mansour Darvizeh
The Journal of Mechanical Science and Technology, vol. 24, no. 9, pp.1855-1864, 2010
Effect of piping systems on surge in centrifugal compressors
Hideaki Tamaki
The Journal of Mechanical Science and Technology, vol. 22, no. 10, pp.1857-1863, 2008
Finite element modeling of the human cervical spinal column: Role of the uncovertebral joint
In Seok Han, Young Eun Kim* and Sunghwan Jung
The Journal of Mechanical Science and Technology, vol. 26, no. 6, pp.1857-1864, 2012
Design optimization of low-speed axial flow fan blade with three-dimensional RANS analysis
Ki-Sang Lee
The Journal of Mechanical Science and Technology, vol. 22, no. 10, pp.1864-1869, 2008
A simple smart wing actuator using Ni-Ti SMA
Sanghaun Kim, Maenghyo Cho
The Journal of Mechanical Science and Technology, vol. 24, no. 9, pp.1865-1873, 2010
Impact evaluation of rolling contact fatigue life models
Youngsik Choi* and Xiaoping Yang
The Journal of Mechanical Science and Technology, vol. 26, no. 6, pp.1865-1873, 2012
Numerical analysis for prediction of flow rate of the motor cooling fan
Tae In Kang
The Journal of Mechanical Science and Technology, vol. 22, no. 10, pp.1870-1875, 2008
An automated CAE system for multidisciplinary structural design : its application to micro accelerometer
Joon-Seong Lee, Ho-Jung Lee
The Journal of Mechanical Science and Technology, vol. 24, no. 9, pp.1875-1883, 2010
Performance of a cross-flow fan with various shapes of a rearguider and an exit duct
Tae-An Kim
The Journal of Mechanical Science and Technology, vol. 22, no. 10, pp.1876-1882, 2008
Design of axial fan using inverse design method
Kyoung-Yong Lee
The Journal of Mechanical Science and Technology, vol. 22, no. 10, pp.1883-1888, 2008
A study on chevron crack formation and evolution in a cold extrusion
Jun-Seok Choi, Hyun-Chul Lee,Yong-Taek Im
The Journal of Mechanical Science and Technology, vol. 24, no. 9, pp.1885-1890, 2010
A numerical study on the unsteady flow behavior and the performance of an automotive sirocco fan
Yohan Jung
The Journal of Mechanical Science and Technology, vol. 22, no. 10, pp.1889-1895, 2008
Reliability bound based on the maximum entropy principle with respect to the first truncated moment
Young Hwa Sung, Byung Man Kwak
The Journal of Mechanical Science and Technology, vol. 24, no. 9, pp.1891-1900, 2010
Performance characteristics of turbo blower in a refuse collecting system according to operation conditions
C.-M. Jang
The Journal of Mechanical Science and Technology, vol. 22, no. 10, pp.1896-1901, 2008
Measured and non-free vortex design results of axial flow fans
Ferenc Szlivka
The Journal of Mechanical Science and Technology, vol. 22, no. 10, pp.1902-1907, 2008
Rotating disk apparatus for polymer-induced turbulent drag reduction
Cheng Hai Hong
The Journal of Mechanical Science and Technology, vol. 22, no. 10, pp.1908-1913, 2008
A study on the solid-liquid 2 phase helical flow in an inclined annulus
Sang-Mok Han
The Journal of Mechanical Science and Technology, vol. 22, no. 10, pp.1914-1920, 2008
A mass addition approach to the bypass turbomachine through flow inverse design problem
Peng Shan
The Journal of Mechanical Science and Technology, vol. 22, no. 10, pp.1921-1925, 2008
Research on a new type of squirt gun for cleaning
Jinmu ZHU
The Journal of Mechanical Science and Technology, vol. 22, no. 10, pp.1926-1929, 2008
Leak detection in pipe using transient flow and genetic algorithm
Young-joon KIM
The Journal of Mechanical Science and Technology, vol. 22, no. 10, pp.1930-1936, 2008
Numerical analysis of the combustion process in a four-stroke
Wendy Hardyono Kurniawan
The Journal of Mechanical Science and Technology, vol. 22, no. 10, pp.1937-1944, 2008
Effect of hole shape on the heat transfer in a rectangular duct with perforated blockage walls
Somin Shin
The Journal of Mechanical Science and Technology, vol. 22, no. 10, pp.1945-1951, 2008
Heat/Mass transfer measurement on concave surface in rotating jet impingement
Sung Kook Hong
The Journal of Mechanical Science and Technology, vol. 22, no. 10, pp.1952-1958, 2008
Influence of nozzle exit tip thickness on the performance and flow field of jet pump
Xinping LONG
The Journal of Mechanical Science and Technology, vol. 22, no. 10, pp.1959-1965, 2008
Experimental study on two-way flow passages in pumping system
Jinmu ZHU
The Journal of Mechanical Science and Technology, vol. 22, no. 10, pp.1966-1970, 2008
Impeller inlet geometry effect on performance improvement for centrifugal pumps
Xianwu Luo
The Journal of Mechanical Science and Technology, vol. 22, no. 10, pp.1971-1976, 2008
Performance analysis and improvement for CC-OTEC system
WANG Tong
The Journal of Mechanical Science and Technology, vol. 22, no. 10, pp.1977-1983, 2008
Blade number effect for a ducted wind turbine
Sheng-Huan Wang
The Journal of Mechanical Science and Technology, vol. 22, no. 10, pp.1984-1992, 2008
ThermoPoD: A reliability study on active infrared thermography for the inspection of composite
Y. Duan, P. Servais, M. Genest, C. Ibarra-Castanedo, X. P. V. Maldague
The Journal of Mechanical Science and Technology, vol. 26, no. 7, pp.1985-1992, 2012
Effects of centerline curvature and cross-sectional shape transitioning in the subsonic diffuser of the F-5 fighter jet
I. H. Ibrahim
The Journal of Mechanical Science and Technology, vol. 22, no. 10, pp.1993-1997, 2008
Design and fabrication of custom-made dental implants
X. Chen, L. Xie, J. Chen, R. Du, F. Deng
The Journal of Mechanical Science and Technology, vol. 26, no. 7, pp.1993-1998, 2012
Numerical analysis of 3-D flow through LNG marine control valves for their advanced design
Young Joon An
The Journal of Mechanical Science and Technology, vol. 22, no. 10, pp.1998-2005, 2008
Characterization of compressive deformation behavior of multi-layer porous composite materials for articular tissue
S. Hwang, M. Todo
The Journal of Mechanical Science and Technology, vol. 26, no. 7, pp.1999-2004, 2012
Harvest human kinetic energy to power portable electronics
L. Xie, R. Du
The Journal of Mechanical Science and Technology, vol. 26, no. 7, pp.2005-2008, 2012
The effect of microstructure on creep behavior of a powder metallurgy (PM) beta gamma alloy
D. Y. Seo, T. Sawatzky, H. Saari, D. J. Kim, P. Au, C. S. Seok
The Journal of Mechanical Science and Technology, vol. 26, no. 7, pp.2009-2013, 2012
Wear behavior of diamond wheel for grinding optical connector ferrule
Chang-Min Suh
The Journal of Mechanical Science and Technology, vol. 22, no. 11, pp.2009-2015, 2008
Evaluation of welding characteristics for manual overlay and laser cladding materials in gas turbine blades
H.-I. Kim, H.-S. Park, J.-M. Koo, C.-S. Seok, S.-H. Yang, M.-Y. Kim
The Journal of Mechanical Science and Technology, vol. 26, no. 7, pp.2015-2018, 2012
A study on three dimensional layout design by the simulated annealing method
Seung-Ho Jang
The Journal of Mechanical Science and Technology, vol. 22, no. 11, pp.2016-2023, 2008
Microstructural investigation of GTD 111DS materials in the heat treatment conditions
H.-I. Kim, H.-S. Park, J.-M. Koo, C.-S. Seok, S.-H. Yang, M.-Y. Kim
The Journal of Mechanical Science and Technology, vol. 26, no. 7, pp.2019-2022, 2012
The crack growth behaviour of Incoloy 800H under fatigue and dwell-fatigue conditions at elevated temperature
D. J. Kim, D. Y. Seo, J. Tsang, W. J. Yang, J. H. Lee, H. Saari, C. S. Seok
The Journal of Mechanical Science and Technology, vol. 26, no. 7, pp.2023-2027, 2012
Parameter study for a dimple location in a space grid under the critical impact load
Soobum Lee
The Journal of Mechanical Science and Technology, vol. 22, no. 11, pp.2024-2029, 2008
Effect of phosphorous on the reliability of the protective oxide layer on platinum aluminide coated CMSX-4
J. S. Jung, D. S. McPhail, B. A. Shollock
The Journal of Mechanical Science and Technology, vol. 26, no. 7, pp.2029-2032, 2012
The effect of additional equilibrium stress functions on the three-node hybrid-mixed curved beam element
Jin-Gon Kim
The Journal of Mechanical Science and Technology, vol. 22, no. 11, pp.2030-2037, 2008
A constitutive model for polyurethane foam with strain rate sensitivity
K. Y. Jeong, S. S. Cheon, M. B. Munshi
The Journal of Mechanical Science and Technology, vol. 26, no. 7, pp.2033-2038, 2012
Structural analysis of a bileaflet mechanical heart valve prosthesis with curved leaflet
Young Joo Kwon
The Journal of Mechanical Science and Technology, vol. 22, no. 11, pp.2038-2047, 2008
Enhanced sequential optimization and reliability assessment for reliability-based design optimization
H.-Z. Huang, X. Zhang, Y. Liu, D. Meng, Z. Wang
The Journal of Mechanical Science and Technology, vol. 26, no. 7, pp.2039-2043, 2012
Reliability-based design optimization for box-booms considering strength degradation and random total working time
Z. Wang, G. Li, H.-Z. Huang, X.-L. Zhang, Y. Li
The Journal of Mechanical Science and Technology, vol. 26, no. 7, pp.2045-2049, 2012
Intrinsic stress, mismatch strain, and self-assembly during deposition of thin films subjected to an externally applied force
Sang-Hyun Kim
The Journal of Mechanical Science and Technology, vol. 22, no. 11, pp.2048-2055, 2008
Terahertz spectroscopy approach of the fiber orientation influence on CFRP composite solid laminates
J.-W. Park, K.-H. Im, D. K. Hsu, J.-A. Jung, I.-Y. Yang
The Journal of Mechanical Science and Technology, vol. 26, no. 7, pp.2051-2054, 2012
Benchmark analysis on PFM analysis codes for aged piping of nuclear power plants
H. Itoh, Y. Li, K. Osakabe, K. Onizawa, S. Yoshimura
The Journal of Mechanical Science and Technology, vol. 26, no. 7, pp.2055-2058, 2012
An estimation of failure stress condition in rocker arm shaft through FEA and microscopic fractography
Dong Woo Lee
The Journal of Mechanical Science and Technology, vol. 22, no. 11, pp.2056-2061, 2008
Reliability and availability analysis for an on board computer in a satellite system using standby redundancy and rejuvenation
D. S. Kim, S. M. Lee, J.-H. Jung, T. H. Kim, S. Lee, J. S. Park
The Journal of Mechanical Science and Technology, vol. 26, no. 7, pp.2059-2063, 2012
Free vibration of multi-layered circular cylindrical shell with cross-ply walls, including shear deformation by using spline function method
K. K.Viswanathan
The Journal of Mechanical Science and Technology, vol. 22, no. 11, pp.2062-2075, 2008
Heating performance characteristics of stack coolant source heat pump using R744 for fuel cell electric vehicles
H.-S. Lee, J.-P. Won, C.-W. Cho, Y.-C. Kim, M.-Y. Lee
The Journal of Mechanical Science and Technology, vol. 26, no. 7, pp.2065-2071, 2012
Design of pedestrian friendly vehicle bumper
Tso-Liang Teng*, Van-Luc Ngo and Trong-Hai Nguyen
The Journal of Mechanical Science and Technology, vol. 24, no. 10, pp.2067-2073, 2010
Coherence technique for noise reduction in rotary compressor
H. C. Kim, M. G. Cho, J. Kim, J. H. Park, J. Shim
The Journal of Mechanical Science and Technology, vol. 26, no. 7, pp.2073-2076, 2012
Low-temperature creep behavior of ultrafine-grained 5083 Al alloy processed by equal-channel angular pressing
Ho-Kyung Kim
The Journal of Mechanical Science and Technology, vol. 24, no. 10, pp.2075-2081, 2010
Penetrator strength effect in long-rod critical ricochet angle
K. Daneshjou
The Journal of Mechanical Science and Technology, vol. 22, no. 11, pp.2076-2089, 2008
A compact and fast nano-stylus profiling head for optical instruments
J.-H. Park, Y.-K. Jo, J. Kim, D.-Y. Lee
The Journal of Mechanical Science and Technology, vol. 26, no. 7, pp.2077-2080, 2012
Eddy current testing of type-439 stainless steel tubing using magnetic saturation technique
H. J. Lee, C. H. Cho, M. W. Nam, H. J. Yoo, S.-Y. Hong
The Journal of Mechanical Science and Technology, vol. 26, no. 7, pp.2081-2085, 2012
Effect of raceway geometry parameters on the carrying capability and the service life of a four-point-contact slewing bearing
Xuehai Gao, Xiaodiao Huang*, Hua Wang, Rongjing Hong and Jie Chen
The Journal of Mechanical Science and Technology, vol. 24, no. 10, pp.2083-2089, 2010
Modeling and grinding large sculptured surface by robotic digitization
J. W. Park, H. U. Cho, C. W. Chung, Y. S. Lee, D. J. Jeon
The Journal of Mechanical Science and Technology, vol. 26, no. 7, pp.2087-2091, 2012
Effects of thickness and surface roughness on mechanical properties of aluminum sheets
Chang Hee Suh, Yun-Chul Jung and Young Suk Kim*
The Journal of Mechanical Science and Technology, vol. 24, no. 10, pp.2091-2098, 2010
The crack healing behavior of ZrO2/SiC composite ceramics with TiO2 additive
K. W. Nam, J. R. Hwang
The Journal of Mechanical Science and Technology, vol. 26, no. 7, pp.2093-2096, 2012
Characteristics of A356/SiCp and A390/SiCp composites
B.-C. Goo, M.-H. Kim
The Journal of Mechanical Science and Technology, vol. 26, no. 7, pp.2097-2100, 2012
An EMG-based muscle force monitoring system
Jongsang Son, Sungjae Hwang and Youngho Kim*
The Journal of Mechanical Science and Technology, vol. 24, no. 10, pp.2099-2105, 2010
Material characterization of Inconel 718 from free bulging test at high temperature
J.-T. Yoo, J.-H. Yoon, H.-S. Lee, S.-K. Youn
The Journal of Mechanical Science and Technology, vol. 26, no. 7, pp.2101-2105, 2012
Bending fatigue characteristics of wire rope
S. H. Kim, R. H. Bae, J. D. Kwon
The Journal of Mechanical Science and Technology, vol. 26, no. 7, pp.2107-2110, 2012
Semi-analytical solution of magneto-thermo-elastic stresses for functionally graded variable thickness rotating disks
A. Ghorbanpour Arani*, A. Loghman, A. R. Shajari and S. Amir
The Journal of Mechanical Science and Technology, vol. 24, no. 10, pp.2107-2117, 2010
Effect of a brazing process on mechanical and fatigue behavior of alclad aluminum 3005
H.-H. Kim, S.-B. Lee
The Journal of Mechanical Science and Technology, vol. 26, no. 7, pp.2111-2115, 2012
Effect of stress ratio on fatigue life of GFRP composites for WT blade
Y.-H. Huh, J.-H. Lee, D.-J. Kim, Y.-S. Lee
The Journal of Mechanical Science and Technology, vol. 26, no. 7, pp.2117-2120, 2012
Three-dimensional weld toe magnification factors for various welded joints
J.-W. Han, K.-H. Lee, S.-H. Han
The Journal of Mechanical Science and Technology, vol. 26, no. 7, pp.2121-2124, 2012
Thermal property of insulating material at cryogenic temperature
Y. S. Choi, D. L. Kim
The Journal of Mechanical Science and Technology, vol. 26, no. 7, pp.2125-2128, 2012
Estimation of pyrolysis-related properties using repulsive particle swarm optimization
W.-H. Park, K.-B. Yoon, H.-C. Chang, T.-K. Kim
The Journal of Mechanical Science and Technology, vol. 26, no. 7, pp.2129-2132, 2012
Thermal deformation and stress analysis of disk brakes by finite element method
S.-S. Kang, S.-K. Cho
The Journal of Mechanical Science and Technology, vol. 26, no. 7, pp.2133-2137, 2012
Residual strain measurement of piezoelectric multilayers by spiral structure
J.-H. Park, Y.-R. Oh, H.-S. Nam, Y.-J. Kim, T.-H. Kim, H.-Y. Kim
The Journal of Mechanical Science and Technology, vol. 26, no. 7, pp.2139-2142, 2012
Development of a press-forming technology of the pressboard for a 154 kV transformer
W. B. Suh, J. Y. Yim, D. H. Bae
The Journal of Mechanical Science and Technology, vol. 26, no. 7, pp.2143-2146, 2012
Pitch-catch ultrasonic study on unidirectional CFRP composite laminates using Rayleigh wave transducers
J.-W. Park, K.-H. Im, D. K. Hsu, J.-A. Jung, I.-Y. Yang
The Journal of Mechanical Science and Technology, vol. 26, no. 7, pp.2147-2150, 2012
Correlation analysis of brush temperature in brush-type DC motor for predicting motor life
W.-G. Shin, Y.-S. Song, Y.-K. Seo
The Journal of Mechanical Science and Technology, vol. 26, no. 7, pp.2151-2154, 2012
An improved radial basis function network for structural reliability analysis
H. Z. Dai, W. Zhao, W. Wang* and Z. G. Cao
The Journal of Mechanical Science and Technology, vol. 25, no. 9, pp.2151-2159, 2011
Reliability analysis of process-induced cracks in rotary swaged shell nose part
J. Jang, W. Kwon, S. Chun, Y. Moon
The Journal of Mechanical Science and Technology, vol. 26, no. 7, pp.2155-2158, 2012
Non-linear flexible body analysis for mechanical systems
D. H. Bae, C. H. Lee, D. S. Bae
The Journal of Mechanical Science and Technology, vol. 26, no. 7, pp.2159-2162, 2012
Influences of post weld heat treatment on fatigue crack growth behavior of TIG welding of 6013 T4 aluminum alloy joint (Part 1. Fatigue crack growth across the weld metal)
Gunawan Dwi Haryadi and Seon Jin Kim*
The Journal of Mechanical Science and Technology, vol. 25, no. 9, pp.2161-2170, 2011
Surface characteristics of aluminum 6061-T6 subjected to Nd:YAG pulsed-laser irradiation
S. Choi, C. S. Kim, K.-Y. Jhang, W.-S. Shin
The Journal of Mechanical Science and Technology, vol. 26, no. 7, pp.2163-2166, 2012
Numerical and experimental studies on the dynamic behaviors of a gun that uses the soft recoil system
K. J. Kang, H. I. Gimm
The Journal of Mechanical Science and Technology, vol. 26, no. 7, pp.2167-2170, 2012
Effect of constraint on fracture behavior of welded 17mn4 and aisi304 steels
Bahadir Uyulgan, Hakan Cetinel* and Tevfik Aksoy
The Journal of Mechanical Science and Technology, vol. 25, no. 9, pp.2171-2177, 2011
Simplified vulnerability assessment procedure for a warship based on the vulnerable area approach
K. S. Kim, J. H. Lee
The Journal of Mechanical Science and Technology, vol. 26, no. 7, pp.2171-2181, 2012
Investigation on the impact behavior of 2 3 Al O -SiC -MgO nanoceramic/metal laminated composite
Ali Asadi*, Ali Sadough Vanini and Amin Jabbari
The Journal of Mechanical Science and Technology, vol. 25, no. 9, pp.2179-2184, 2011
Effect of non-uniform void size and shape distributions on deformation failure in cast aluminum alloy
J.-S. Song, D.-H. Kang, D. Bae, H.-S. Yoon, T.-W. Kim
The Journal of Mechanical Science and Technology, vol. 26, no. 7, pp.2183-2187, 2012
Effect of microstructure and chemical composition on cold crack susceptibility of high-strength weld metal
Hui-Jun Yi*, Yong-Jun Lee, Jong-Yun Kim and Sung-Su Kang
The Journal of Mechanical Science and Technology, vol. 25, no. 9, pp.2185-2193, 2011
Kinematics and nonlinear control of an electromagnetic actuated CVT system for passenger vehicle
A. Rahman, S. Bin Sharif, A. Hossain, A. K. M. Mohiuddin, A. H. M. Z. Alam
The Journal of Mechanical Science and Technology, vol. 26, no. 7, pp.2189-2196, 2012
Free vibration analysis of solar functionally graded plates with temperaturedependent material properties using second order shear deformation theory
A. Shahrjerdi*, F. Mustapha, M. Bayat and D. L. A. Majid
The Journal of Mechanical Science and Technology, vol. 25, no. 9, pp.2195-2209, 2011
Tracking control of a three-wheeled omnidirectional mobile manipulator system with disturbance and friction
T. D. Viet, P. T. Doan, N. Hung, H. K. Kim, S. B. Kim
The Journal of Mechanical Science and Technology, vol. 26, no. 7, pp.2197-2211, 2012
Dynamic deformation behavior of bovine femur using SHPB
Ouk Sub Lee* and Jin Soo Park
The Journal of Mechanical Science and Technology, vol. 25, no. 9, pp.2211-2215, 2011
"Thermodynamic model for prediction of performance and emission characteristics of SI engine fuelled by gasoline and natural gas with experimental verification
D. Mehrnoosh, H. A. Asghar, M. A. Asghar
The Journal of Mechanical Science and Technology, vol. 26, no. 7, pp.2213-2226, 2012
Optimum design of the cored linear motor using experiment design
Sungill Se
The Journal of Mechanical Science and Technology, vol. 23, no. 8, pp.2215-2223, 2009
Creep modeling in functionally graded rotating disc of variable thickness
D. Deepak, V. K. Gupta*, A. K. Dham
The Journal of Mechanical Science and Technology, vol. 24, no. 11, pp.2221-2232, 2010
An adaptive procedure based on combining finite elements with meshless methods
Hyun-Gyu Kim
The Journal of Mechanical Science and Technology, vol. 23, no. 8, pp.2224-2235, 2009
An inscribed surface model for the elastic properties of armchair carbon nanotube
Sheng Lu, Chongdu Cho*, Kyu-won (Ken) Choi, Wonjun Choi, Sangkyo Lee, Na Wang
The Journal of Mechanical Science and Technology, vol. 24, no. 11, pp.2233-2239, 2010
Optimal design of a variable stiffness joint in a robot manipulator using the response surface method
Jeonghoon Yoo
The Journal of Mechanical Science and Technology, vol. 23, no. 8, pp.2236-2243, 2009
Variable thermal loading analysis on (111) plane of single crystal gold
Murugavel Rathinam
The Journal of Mechanical Science and Technology, vol. 24, no. 11, pp.2241-2245, 2010
Modeling high-speed impacts and explosions with ExLO code
Wan-Jin Chung
The Journal of Mechanical Science and Technology, vol. 23, no. 8, pp.2244-2252, 2009
A mixed analytical-numerical investigation of snap-through of low arches with a power-law variable thickness
Ali Asghar Atai*, Mohammad Hassan Naei, Reza Eghtefari
The Journal of Mechanical Science and Technology, vol. 24, no. 11, pp.2247-2252, 2010
Analytical solutions for bending analysis of rectangular laminated plates with arbitrary lamination and boundary conditions
Ali Mohammad Naserian Nik
The Journal of Mechanical Science and Technology, vol. 23, no. 8, pp.2253-2267, 2009
Development and validation of a pedestrian deformable finite element model
Tso-Liang Teng
The Journal of Mechanical Science and Technology, vol. 23, no. 8, pp.2268-2276, 2009
Modulus of elasticity and yield bending stress of coating lubrotec 19985 produced by the metal spraying process
Nabil B. Sada
The Journal of Mechanical Science and Technology, vol. 23, no. 8, pp.2277-2284, 2009
Hygrothermal behavior of electro-active paper actuator
Heung Soo Kim
The Journal of Mechanical Science and Technology, vol. 23, no. 8, pp.2285-2290, 2009
The role of transfer film and back transfer behavior on the tribological performance of polyoxymethylene in sliding
M. H. Cho
The Journal of Mechanical Science and Technology, vol. 23, no. 8, pp.2291-2298, 2009
A dynamic asymmetrical crack model of bridging fiber pull-out in unidirectional composite materials
Xin-gang Li, Yun-hong Cheng, Nian-chun Lü*, Guo-dong Hao and Jin Cheng
The Journal of Mechanical Science and Technology, vol. 25, no. 9, pp.2297-2309, 2011
Schauder fixed point theorem based existence of periodic solution for the response of Duffing’s oscillator
Ahmad Feyz Dizaji
The Journal of Mechanical Science and Technology, vol. 23, no. 8, pp.2299-2307, 2009
The influence on the contact condition and initial fixation stability of the main design parameters of a self-expansion type anterior cruciate ligament fixation device
Jong-Dae Kim
The Journal of Mechanical Science and Technology, vol. 22, no. 12, pp.2301-2309, 2008
Numerical simulation of displacement instabilities of surface grooves on an alumina forming alloy during thermal cycling oxidation
Jun Ding
The Journal of Mechanical Science and Technology, vol. 23, no. 8, pp.2308-2319, 2009
Nondestructive testing and crack evaluation of ferromagnetic material by using the linearly integrated hall sensor array
Jinyi Lee
The Journal of Mechanical Science and Technology, vol. 22, no. 12, pp.2310-2317, 2008
Molecular simulation study on adhesions and deformations for Polymethyl Methacrylate (PMMA) resist in nanoimprint lithography
Sungjin Kwon, Youngmin Lee, Jaeshin Park and Seyoung Im*
The Journal of Mechanical Science and Technology, vol. 25, no. 9, pp.2311-2322, 2011
Elastic-plastic thermal stress analysis of an aluminum composite disc under parabolic thermal load distribution
Gürkan Altan
The Journal of Mechanical Science and Technology, vol. 22, no. 12, pp.2318-2327, 2008
Influences of equal biaxial tensile loads on the stress fields near the mixed mode crack
Dong-Chul Shin
The Journal of Mechanical Science and Technology, vol. 23, no. 8, pp.2320-2329, 2009
Design of mechanical presses driven by multi-servomotor
Yongjun Bai*, Feng Gao and Weizhong Guo
The Journal of Mechanical Science and Technology, vol. 25, no. 9, pp.2323-2334, 2011
The kinematic design of a planar-cam type pick-and-place device
Wen-Tung Chang
The Journal of Mechanical Science and Technology, vol. 22, no. 12, pp.2328-2336, 2008
A study on the analysis of O-ring under uniform squeeze rate and internal pressure by photoelastic experimental hybrid method
Jaisug Hawong
The Journal of Mechanical Science and Technology, vol. 23, no. 8, pp.2330-2340, 2009
Growth simulation for 3D surface and through-thickness cracks using SGBEM-FEM alternating method
Jai Hak Park1,* and Gennadiy P. Nikishkov2
The Journal of Mechanical Science and Technology, vol. 25, no. 9, pp.2335-2344, 2011
Contact stress of O-ring under uniform squeeze rate by photoelastic experimental hybrid method
Jeonghwan Nam
The Journal of Mechanical Science and Technology, vol. 22, no. 12, pp.2337-2349, 2008
A new assumed strain solid–shell formulation “SHB6” for the six-node prismatic finite element
Vuong-Dieu Trinh, Farid Abed-Meraim* and Alain Combescure
The Journal of Mechanical Science and Technology, vol. 25, no. 9, pp.2345-2364, 2011
Inverse determination of the loading source of the infinite beam on elastic foundation
T. S. Jang
The Journal of Mechanical Science and Technology, vol. 22, no. 12, pp.2350-2356, 2008
Nonlocal beam models for buckling of nanobeams using state-space method regarding different boundary conditions
S. Sahmani* and R. Ansari
The Journal of Mechanical Science and Technology, vol. 25, no. 9, pp.2365-2375, 2011
Ultimate strength of a square plate with a longitudinal/transverse dent under axial compression
A. V. Raviprakash*, B. Prabu and N. Alagumurthi
The Journal of Mechanical Science and Technology, vol. 25, no. 9, pp.2377-2384, 2011
Pasternak foundation effect on the axial and torsional waves propagation in embedded DWCNTs using nonlocal elasticity cylindrical shell theory
A. Ghorbanpour Arani*, A. A. Mosallaie Barzoki, R. Kolahchi and A. Loghman
The Journal of Mechanical Science and Technology, vol. 25, no. 9, pp.2385-2391, 2011
Investigation of the mechanical behavior of a flexible solid metal seal for a cryogenic butterfly valve
Jun Tae Ahn, Kyung Chul Lee, Kwon Hee Lee and Seung Ho Han*
The Journal of Mechanical Science and Technology, vol. 25, no. 9, pp.2393-2400, 2011
study on the development of equivalent beam analysis model on pedestrian protection bumper impact
Dong-Kyou Park* and Chang-Doo Jang
The Journal of Mechanical Science and Technology, vol. 25, no. 9, pp.2401-2411, 2011
Evaluation and decision of products conceptual design schemes based on customer requirements
Hong-Zhong Huang*, Yanfeng Li, Wenhai Liu, Yu Liu and Zhonglai Wang
The Journal of Mechanical Science and Technology, vol. 25, no. 9, pp.2413-2425, 2011
study on the behaviors and stresses of O-ring under uniform squeeze rates and internal pressure by transparent type photoelastic experiment
Jeong-Hwan Nam, Jai-Sug Hawong*, Dong-Chul Shin and Bruno R. Mose
The Journal of Mechanical Science and Technology, vol. 25, no. 9, pp.2427-2438, 2011
Experimental and numerical studies for the forming groove and separating groove design in slit rolling process
D. H. NA, S. H. Cho and Y. Lee*
The Journal of Mechanical Science and Technology, vol. 25, no. 9, pp.2439-2446, 2011
3-Dimensional stress analysis of O-ring under uniform squeeze rate and internal pressure by photoelastic experimental hybrid method
J. H. Nam, J. S. Hawong*, Y. Liu and D. C. Shin
The Journal of Mechanical Science and Technology, vol. 25, no. 9, pp.2447-2455, 2011
Characterization of the ballistic limit curve for hypervelocity impact of sphere onto single plate
Minhyung Lee* and Young Jun Cho
The Journal of Mechanical Science and Technology, vol. 25, no. 9, pp.2457-2463, 2011
Reliability assessment and prediction of a fatigue design criterion for the gas-welded joints
Seung Yeb Baek and Dong Ho Bae*
The Journal of Mechanical Science and Technology, vol. 24, no. 12, pp.2497-2502, 2010
Knowledge-based configuration design of a train bogie
Jangyong Lee* and Soonhung Han
The Journal of Mechanical Science and Technology, vol. 24, no. 12, pp.2503-2510, 2010
Magnetic torque maximization in a camera shutter module by the topology optimization
Jihun Kim, Kyung Ho Sun, Woochul Kim, Jae Eun Kim*
The Journal of Mechanical Science and Technology, vol. 24, no. 12, pp.2511-2517, 2010
Thermal buckling analysis of cross-ply laminated rectangular plates under nonuniform temperature distribution: A differential quadrature approach
M. Mansour Mohieddin Ghomshei*, Amin Mahmoudi
The Journal of Mechanical Science and Technology, vol. 24, no. 12, pp.2519-2527, 2010
Experimental verification of RV-MTS model for fracture in soda–lime glass weakened by a V-notch
M. R. Ayatollahi* and A. R. Torabi
The Journal of Mechanical Science and Technology, vol. 25, no. 10, pp.2529-2534, 2011
Volume integral equation method for multiple isotropic inclusion problems in an infinite solid under tension or in-plane shear
Jungki Lee*
The Journal of Mechanical Science and Technology, vol. 24, no. 12, pp.2529-2537, 2010
Hybrid determination of mixed-mode stress intensity factors on discontinuous finite-width plate by finite element and photoelasticity
Tae Hyun Baek*, Lei Chen and Dong Pyo Hong
The Journal of Mechanical Science and Technology, vol. 25, no. 10, pp.2535-2543, 2011
Recresistance of high-toughness grains to cleavage cracking in a polycrystalline, brittle material
Weiyi Lu, Jin Chen, Srinivas S. Chakravarthula, Falgun B. Surani and Yu Qiao*
The Journal of Mechanical Science and Technology, vol. 25, no. 10, pp.2545-2549, 2011
Dynamic propagation of a weak-discontinuous interface crack between two dissimilar functionally graded layers under anti-plane shear
Jeong Woo Shin and Young-Shin Lee*
The Journal of Mechanical Science and Technology, vol. 25, no. 10, pp.2551-2557, 2011
A double weighted stochastic response surface method for reliability analysis
Fenfen Xiong, Yu Liu, Ying Xiong and Shuxing Yang*
The Journal of Mechanical Science and Technology, vol. 26, no. 8, pp.2573-2580, 2012
Creep damage evaluation of thick-walled spheres using a long-term creep constitutive model
Abbas Loghman, Nader Shokouhi
The Journal of Mechanical Science and Technology, vol. 23, no. 10, pp.2577-2582, 2009
Landing impact analysis of sports shoes using 3-D coupled foot-shoe finite element model
Jin-Rae Cho,Seung-Bum Park, Sung-Hyun Ryu, Sung-Ho Kim, Shi-Bok Lee
The Journal of Mechanical Science and Technology, vol. 23, no. 10, pp.2577-2582, 2009
Nonlinear analysis of functionally graded laminates considering piezoelectric effect
Bashir Behjat* and Mohamad Reza Khoshravan
The Journal of Mechanical Science and Technology, vol. 26, no. 8, pp.2581-2588, 2012
Optimal design of supersonic nozzle contour for altitude test facility
Khin Oo Mon and Changjin Lee*
The Journal of Mechanical Science and Technology, vol. 26, no. 8, pp.2589-2594, 2012
Cam profile optimization for a new cam drive
Hansong Xiao, Jean W. Zu
The Journal of Mechanical Science and Technology, vol. 23, no. 10, pp.2592-2602, 2009
Crumple zone design for pedestrian protection using impact analysis
Hyung-il Moon, Young-eun Jeon, Dae-Young Kim, Heon Young Kim* and Yong-soo Kim
The Journal of Mechanical Science and Technology, vol. 26, no. 8, pp.2595-2601, 2012
Effect of input variability on the quality of laser shock processing
Abul Fazal M. Arif
The Journal of Mechanical Science and Technology, vol. 23, no. 10, pp.2603-2611, 2009
Evaluating the stresses of a stepped unrounded D-ring under uniform squeeze rate and internal pressure by photoelastic experimental hybrid method
Bruno R. Mose, Jai Sug Hawong*, Bernard O. Alunda, Lim Hyun Seok and Jeonghwan Nam
The Journal of Mechanical Science and Technology, vol. 26, no. 8, pp.2603-2616, 2012
Study on the optimal design of engine cylinder head by parametric structure characterization with weight distribution criterion
Jun Hong, Baotong Li*, Yubao Chen and Huei Peng
The Journal of Mechanical Science and Technology, vol. 25, no. 10, pp.2607-2614, 2011
Uncertainty estimation of reliability redundancy in complex systems v
Gui-Bao Wang, Hong-Zhong Huang, Yu Liu, Xiaoling Zhang, Zhonglai Wang
The Journal of Mechanical Science and Technology, vol. 23, no. 10, pp.2612-2623, 2009
Analytic study on structural behavior of the string bed in a tennis racket
Seongyeong Yang*, Apostolos Fafitis and Avi Wiezel
The Journal of Mechanical Science and Technology, vol. 25, no. 10, pp.2615-2621, 2011
A study on the contact stresses of square ring under uniform squeeze rate and internal pressure by photoelastic experimental hybrid method
Alunda Bernard Ouma, Jeonghwan Nam, Lim Hyun Seok and Jai Sug Hawong*
The Journal of Mechanical Science and Technology, vol. 26, no. 8, pp.2617-2626, 2012
A new accurate curvature matching and optimal tool based five-axis machining algorithm
Than Lin, Jae-Woo Lee,Erik L. J. Bohez
The Journal of Mechanical Science and Technology, vol. 23, no. 10, pp.2624-2634, 2009
The characteristics of intermetallic compounds and hardness of Ni-Cr/AC8A composites under different infiltration temperatures
WonJun Lee, HoJun Hwang, HyeongJo Kim, CheolHong Park, SunChul Huh and WonJo Park*
The Journal of Mechanical Science and Technology, vol. 26, no. 8, pp.2627-2630, 2012
Hydrogen-assisted stress corrosion cracking simulation using the stress-modified fracture strain model
Nak-Hyun Kim, Chang-Sik Oh, Yun-Jae Kim*, Kee-Bong Yoon and Young-Wha Ma
The Journal of Mechanical Science and Technology, vol. 26, no. 8, pp.2631-2638, 2012
Nonlinear transient heat transfer and thermoelastic analysis of thick-walled FGM cylinder with temperature-dependent material properties using Hermitian transfinite element
Mohammad Azadi1,Mahboobeh Azadi
The Journal of Mechanical Science and Technology, vol. 23, no. 10, pp.2635-2644, 2009
Optimal disk clamp design to minimize stress variation of disks in a hard disk drive
Woochul Kim, Woo-Sung Kim, Joseph Chang
The Journal of Mechanical Science and Technology, vol. 23, no. 10, pp.2645-2651, 2009
Nanoindentation of aluminum (100) at various temperatures
Murugavel Rathinam, Ramesh Thillaigovindan, Prema Paramasivam
The Journal of Mechanical Science and Technology, vol. 23, no. 10, pp.2652-2657, 2009
Non-sample based parameters design for system performance reliability improvement
Young Kap Son, Jae-Jung Kim, Seung-Jung Shin
The Journal of Mechanical Science and Technology, vol. 23, no. 10, pp.2658-2667, 2009
Comparison between cold rotary forging and conventional forging
Xinghui Han, Lin Hua
The Journal of Mechanical Science and Technology, vol. 23, no. 10, pp.2668-2678, 2009
Simulation of a head slider considering a discrete track recording technology
Sang-Joon Yoon, Seok-Ho Son, Jihoon Kang, Hyunki Kim
The Journal of Mechanical Science and Technology, vol. 23, no. 10, pp.2679-2685, 2009
A study on the crashworthiness and rollover characteristics of low-floor bus made of sandwich composites
Hee-Young Ko, Kwang-Bok Shin, Kwang-Woo Jeon, Seo-Hyun Cho
The Journal of Mechanical Science and Technology, vol. 23, no. 10, pp.2686-2693, 2009
An efficient numerical solution for frequency response function of micromechanical resonator arrays
Jin Hwan Ko, Doyoung Byun, Jeong Sam Han
The Journal of Mechanical Science and Technology, vol. 23, no. 10, pp.2694-2702, 2009
On the plane contact problem of a functionally graded elastic layer loaded by a frictional sliding flat punch
Hyung Jip Choi
The Journal of Mechanical Science and Technology, vol. 23, no. 10, pp.2703-2713, 2009
Impact of surface hardening treatment generated by shot peening on the fatigue life of brass alloy
Mouna Baklouti, Ridha Mnif and Riadh Elleuch*
The Journal of Mechanical Science and Technology, vol. 26, no. 9, pp.2711-2717, 2012
Prediction of fretting fatigue behavior under elastic-plastic conditions
Ki Su Shin
The Journal of Mechanical Science and Technology, vol. 23, no. 10, pp.2714-2721, 2009
Finite element analysis of a subsurface penny-shaped crack with crack-face contact and friction under a moving compressive load
Jin-Shi Wen, Woo-Eon Ju, Tae-Kyung Han, Seung Tae Choi and Kyung-Sick Lee*
The Journal of Mechanical Science and Technology, vol. 26, no. 9, pp.2719-2726, 2012
Numerical experiments on determination of spatially concentrated time-varying loads on a beam: an iterative regularization method
T. S. Jang, S. L. Han
The Journal of Mechanical Science and Technology, vol. 23, no. 10, pp.2722-2729, 2009
Enhancement of master curve method for inhomogeneous material
Shin-Beom Choi, Sung Choi, Jae-Boong Choi, Yoon-Suk Chang*, Min-Chul Kim and Bong-Sang Lee
The Journal of Mechanical Science and Technology, vol. 26, no. 9, pp.2727-2734, 2012
Accuracy improvement of indenting test results by using wireless cable indenting robot
Kyung-Nam Jang, Jong-Soeg Kim, Sun-Chul Jeong, Kyung-Heum Park and Sung-Yull Hong*
The Journal of Mechanical Science and Technology, vol. 26, no. 9, pp.2735-2740, 2012
Determination of the radial inertia-induced transition strain-rate in split Hopkinson pressure bar tests
Yubin Lu*
The Journal of Mechanical Science and Technology, vol. 25, no. 11, pp.2775-2780, 2011
The analytical solution of the buckling of composite truncated conical shells under combined external pressure and axial compression
M. A. Boorboor Ajdari*, S. Jalili, M. Jafari, J. Zamani and M. Shariyat
The Journal of Mechanical Science and Technology, vol. 26, no. 9, pp.2783-2791, 2012
Inlet geometry effect of wave energy conversion system
Jin-Seok Oh* and Sung-Hun Han
The Journal of Mechanical Science and Technology, vol. 26, no. 9, pp.2793-2798, 2012
Analysis of the hydrodynamic torque effects on large size butterfly valves andcomparing results with AWWA C504 standard recommendations
Farid Vakili-Tahami, Mohammad Zehsaz*, Mahdi Mohammadpour and Ali Vakili-Tahami
The Journal of Mechanical Science and Technology, vol. 26, no. 9, pp.2799-2806, 2012
Buckling analysis of circular and annular composite plates reinforced with carbon nanotubes using FEM
Sh. Maghamikia and J. E. Jam*
The Journal of Mechanical Science and Technology, vol. 25, no. 11, pp.2805-2810, 2011
Review of the finite element models for a structural integrity evaluation of the sodium-cooled fast reactor high temperature piping
Chang-Gyu Park*, Young-Sang Joo and Jong-Bum Kim
The Journal of Mechanical Science and Technology, vol. 26, no. 9, pp.2807-2813, 2012
Optimization of composite pressure vessels with metal liner by adaptive response surface method
Abbas Vafaeesefat*
The Journal of Mechanical Science and Technology, vol. 25, no. 11, pp.2811-2816, 2011
Propagation of Rayleigh waves in a rotating orthotropic materialelastic half-space under initial stress and gravity
A. M. Abd-Alla*, S. M. Abo-Dahab and T. A. Al-Thamali
The Journal of Mechanical Science and Technology, vol. 26, no. 9, pp.2815-2823, 2012
A method for planar development of free-form surfaces made of anisotropic materials
Ki-Hoon Shin*
The Journal of Mechanical Science and Technology, vol. 25, no. 11, pp.2817-2825, 2011
Systematic design space exploration and rearrangement of the MDO problem by using probabilistic methodology
Yong-Hee Jeon, Sangook Jun, Seungon Kang and Dong-Ho Lee*
The Journal of Mechanical Science and Technology, vol. 26, no. 9, pp.2825-2836, 2012
Mathematical representation of bolted-joint stiffness: A new suggested model
Nawras Haidar*, Salwan Obeed and Mohamed Jawad
The Journal of Mechanical Science and Technology, vol. 25, no. 11, pp.2827-2834, 2011
Study of the influence of geometrical and mechanical parameters on ballasted railway tracks design
Julia I. Real*, Laura Gómez, Laura Montalbán and Teresa Real
The Journal of Mechanical Science and Technology, vol. 26, no. 9, pp.2837-2844, 2012
Complete dynamic modeling and approximate state space equations of the flexible link manipulator
Habib Esfandiar* and Saeed Daneshmand
The Journal of Mechanical Science and Technology, vol. 26, no. 9, pp.2845-2856, 2012
Fabrication and mechanical properties of PLLA and CPC composite scaf-folds
Shanglong Xu*, Wei Guo, Junjun Lu and Wei Li
The Journal of Mechanical Science and Technology, vol. 26, no. 9, pp.2857-2862, 2012
Prediction of anisotropic material behavior based on multiresolution continuum mechanics in consideration of a characteristic length scale
Dockjin Lee, Yoon-Suk Chang, Jae-Boong Choi* and Moon-Ki Kim*
The Journal of Mechanical Science and Technology, vol. 26, no. 9, pp.2863-2868, 2012
Boundary element analysis of stress singularity in dissimilar metals by friction welding
N.-Y. Chung and C.-H. Park*
The Journal of Mechanical Science and Technology, vol. 26, no. 9, pp.2869-2877, 2012
Precision design aspects for friction actuation with error compensation
Samir Mekid
The Journal of Mechanical Science and Technology, vol. 23, no. 11, pp.2873-2884, 2009
Application of the differential transformation method and variational iteration method to large deformation of cantilever beams under point load
Pouya Salehi, Hessameddin Yaghoobi* and Mohsen Torabi
The Journal of Mechanical Science and Technology, vol. 26, no. 9, pp.2879-2887, 2012
Analysis of plating grain size effect on whisker
Seung-Jung Shin/Jae-Jung Kim/Young Kap Son
The Journal of Mechanical Science and Technology, vol. 23, no. 11, pp.2885-2890, 2009
Probabilistic modeling of stress-based FLD in tube hydroforming process
Jeong Kim/Woo-Jin Song/Beom-Soo Kang
The Journal of Mechanical Science and Technology, vol. 23, no. 11, pp.2891-2902, 2009
A response surface based sequential approximate optimization using constraint-shifting analogy
Pyokyoung Han/Jongsoo Lee
The Journal of Mechanical Science and Technology, vol. 23, no. 11, pp.2903-2912, 2009
A residual stress analysis program using a Matlab GUI on an autofrettaged compound cylinder
Qiu-Ming Yang/Young-Shin Lee/Eun-Yup Lee/Jae-Hoon Kim/Ki-Up Cha/Suk-Kyun Hong
The Journal of Mechanical Science and Technology, vol. 23, no. 11, pp.2913-2920, 2009
Large deformation and mechanics of flexible isotropic membrane ballooning in three dimensions by differential quadrature method
M. Mozaffari/A. A. Atai/N. Mostafa
The Journal of Mechanical Science and Technology, vol. 23, no. 11, pp.2921-2927, 2009
Automated design system for a rotor with an ellipse lobe profile
Sung-Yuen Jung/Seung-Moo Han/Hae-Yong Cho/Chul Kim
The Journal of Mechanical Science and Technology, vol. 23, no. 11, pp.2928-2937, 2009
A novel method for non-parametric identification of nonlinear restoring forces in nonlinear vibrations from noisy response data: A conservative system
T. S. Jang/S. H. Kwon/S. L. Han
The Journal of Mechanical Science and Technology, vol. 23, no. 11, pp.2938-2947, 2009
Finite element analysis and measurement for residual stress of dissimilar metal weld in pressurizer safety nozzle mockup
Kyoung-soo Lee/W. Kim/Jeong-geun Lee/Chi-yong Park/Jun-seok Yang/Tae-ryong Kim/Jai-hak Park
The Journal of Mechanical Science and Technology, vol. 23, no. 11, pp.2948-2955, 2009
Maximizing structure performances of a sandwich panel with hybrid composite skins using particle swarm optimization algorithm
Hee Keun Cho
The Journal of Mechanical Science and Technology, vol. 23, no. 12, pp.3143-3152, 2009
Autofrettage process analysis of a compound cylinder based on the elastic-perfectly plastic and strain hardening stress-strain curve
Eun-Yup Lee/Young-Shin Lee/Qui-Ming Yang/Jae-Hoon Kim/Ki-Up Cha/Suk-Kyun Hong
The Journal of Mechanical Science and Technology, vol. 23, no. 12, pp.3153-3160, 2009
Bending properties for composites with wrinkled and overlapped fabric preform
Thanh Trung Do/Dong Joo Lee
The Journal of Mechanical Science and Technology, vol. 23, no. 12, pp.3161-3168, 2009
Parallel implementation of finite volume based method for isoelectric focusing
Jaesool Shim/Prashanta Dutta/Cornelius F. Ivory
The Journal of Mechanical Science and Technology, vol. 23, no. 12, pp.3169-3178, 2009
A mathematical model for smart functionally graded beam integrated with shape memory alloy actuators
H. Sepiani/F. Ebrahimi/H. Karimipour
The Journal of Mechanical Science and Technology, vol. 23, no. 12, pp.3179-3190, 2009
Assessment of the sulfide corrosion fatigue strength for a multi-pass welded A106 Gr B steel pipe below the low SSCC limit
Gyu Young Lee/Dong Ho Bae
The Journal of Mechanical Science and Technology, vol. 23, no. 12, pp.3191-3198, 2009
A novel non-probabilistic approach using interval analysis for robust design optimization
Wei Sun/Rongmei Dong/Huanwei Xu
The Journal of Mechanical Science and Technology, vol. 23, no. 12, pp.3199-3208, 2009
Framework for automated finite element analysis with an ontology-based approach
Wei Sun/Qinyi Ma/Shuang Chen
The Journal of Mechanical Science and Technology, vol. 23, no. 12, pp.3209-3220, 2009
 
 
 
JMST Editorial Office: 1556, 301 Bldg., Mechanical and Aerospace Engineering,
Seoul National University, San 56-1 Shinlim-Dong, Kwanak-Ku, Seoul 151-744, Korea
TEL: +82-70-4063-1600, E-mail: editorial@j-mst.org
JMST Production Office: Room 702, KSTC New Building, 635-4, Yeogsam-dong, Gangnam-gu, Seoul 135-703, Korea
TEL: +82-2-501-6056, FAX: +82-2-501-3649, E-mail: editorial@ksme.or.kr